A temperature study on critical micellization concentration (CMC), solubility, and degree of counterion binding of α-sulfonatomyristic acid methyl ester in water by electroconductivity measurements

 For a sodium salt of α-sulfonatomyristic acid methyl ester (14SFNa), one of the α-SFMe series surfactants, critical micellization concentration (CMC), solubility and degree of counterion binding (β) were determined by means of electrocon-ductivity measurements at different temperatures (at every 5 °C) ranging from 15 to 50 °C. The phase diagram of 14SFNa in pure water was constructed from the CMC- and solubility-temperature data, in which the Krafft temperature (critical solution temperature) was found around 0 °C. The changes in the Gibbs energy, ΔG ⁰ _m, enthalpy, ΔH ⁰ _m, and entropy, ΔS ⁰ _m, upon micelle formation as a function of temperature were evaluated taking βvalues into calculation. Received: 28 August 1996 Accepted: 5 November 1996     

Determination of levodopa methyl ester and its metabolites in rat serum by CZE with amperometric detection

A reliable and reproducible method, capillary zone electrophoresis with amperometric detection (CZE–AD), has been developed for separation and quantification of levodopa methyl ester (LDME) and its biotransformation products levodopa (L-DOPA) and dopamine (DA) in rat serum. A carbon-disk electrode was used as working electrode. The optimum conditions for CZE detection were 50 mmol L^–1 phosphate solution at pH 7.0 as running buffer, 17 kV as separation voltage, 1.0 V (vs Ag/AgCl, 3.0 mol L^–1) as detection potential, and sample injection for 8 s at 17 kV. The linear ranges were from 2.4×10^–2 to 2.2 g mL^–1 for LDME, 2.9×10^–1 to 49.5 g mL^–1 for L-DOPA, and 1.4×10^–2 to 1.5 g mL^–1 for DA with correlation coefficients of 0.9997, 0.9994, and 0.9999, respectively. The detection limits for LDME, L-DOPA, and DA were 14.6, 98.0, and 9.7 ng mL^–1, respectively. Recoveries were 80.3% for LDME, 93.5% for L-DOPA, and 86.5% for DA. This method was applied to serum samples after intravenous injection of LDME and L-DOPA to rats.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

Ag/ZrO2催化剂上的1,2-丙二醇选择性气相氧化反应

采用浸渍法制备了一系列Ag/ZrO₂催化剂, 考察了Ag/ZrO₂催化剂对1,2-丙二醇选择性氧化合成丙酮醛反应的催化性能. 实验结果表明: 在原料气配比为V(N₂)∶V(O₂)＝300∶19, n(O₂)/n(alcohol)＝1.2, 反应物液时空速为3.2 g/(g•h), 反应温度为673 K时, 1,2-丙二醇选择性氧化合成丙酮醛反应的转化率为95.7%, 选择性为55.3%, 高于传统电解银催化剂. UV-Vis DRS和XPS的研究结果表明: 在Ag/ZrO₂催化剂上存在大量的Ag^＋和Ag_n^δ＋有利于促进催化活性的提高.     

甲基绿－萃取光度法测定锑

本文用Ｃｅ（ＳＯ＿４）＿２作氧化剂，在６ｍｏｌ／Ｌ　ＨＣｌ溶液中将Ｓｂ（Ⅲ）氧化为Ｓｂ（Ⅴ），过量的氧化剂用盐酸羟胺还原，生成的［ＳｂＣｌ＿６］￣－与甲基绿形成离子缔合物，在２ｍｏｌ／ＬＨＣｌ溶液中被ＣＨＣｌ＿３萃取。Ｔｌ、Ｉｎ、Ｇａ、Ａｕ等２０种离子共存时不干扰测定，用于金属镉及废水中测定微量锑，结果满意。     

Chemical Constituents from the Root of Antidesma Pentandrum var. Barbatum

Investigation of the root extract of Antidesma pentandrum var. barbatum led to the isolation of seven new compounds, antidesmol ( 1 ), antidesmanins E ( 2 ) and F ( 3 ), antidesnone ( 4 ), antidesnol ( 5 ), barbatumols A ( 6 ) and B ( 7 ), together with 14 known compounds including sodium aristolochate‐I ( 10 ) and aristolochic acid‐I methyl ester ( 11 ).     

Oxidation of methyl phenyl sulfide with hydrogen peroxide catalyzed by Ti(IV)-substituted heteropolytungstate

Alkylammonium salts of Ti(IV)-substituted heteropolytungstate, PW₁₁TiO ₁₀ ⁵⁻ , catalyze the oxidation of methyl phenyl sulfide with hydrogen peroxide. The yield of the corresponding sulfoxide and sulfone is practically quantitative. A³¹P NMR study confirms the formation and reactivity of the PW₁₁O₃₉TiO ₂ ⁵⁻ peroxo complex in organic media.     

Fluoride-induced nucleophilic (phenylthio)difluoromethylation of carbonyl compounds with [difluoro(phenylthio)methyl]trimethylsilane (TMS-CF2SPh)

A fluoride-induced nucleophilic (phenylthio)difluoromethylation method using TMS-CF₂SPh has been achieved. This new methodology efficiently transfers “PhSCF₂” group into both enolizable and non-enolizable aldehydes and ketones to give corresponding (phenylthio)difluoromethylated alcohols in good to excellent yields. Diphenyldisulfide can also be (phenylthio)difluoromethylated into PhSCF₂SPh in high yield. The reaction with methyl benzoate, however, gives only low yield of (phenylthio)difluoromethyl phenyl ketone. The above-obtained PhSCF₂-containing alcohols can be further transformed into difluoromethyl alcohols using an oxidation-desulfonylation procedure. This new type of nucleophilic (phenylthio)difluoromethylation methodology may have other potential applications in the medicinal and agrochemical fields.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Performance validation of step-isothermal calorimeters

Isothermal calorimetry is becoming indispensable as a tool for the study of a wide variety of systems. As with all scientific instruments it is essential that robust calibration routines be developed in order to validate the data obtained. Chemical test reactions offer many advantages over (the traditionally used) joule effect heating methods, not least because they have the potential to validate instrument performance (i.e. they can be used to assess all aspects of calorimeter operation). In this work the results of a validation exercise, conducted by Thermal Hazard Technology as part of an installation routine, using the base catalysed hydrolysis of methyl paraben are discussed. In the case described, a systematic misreporting of the reported temperature of a calorimeter was identified, caused by an upgrade to the calorimeter's firmware, a discrepancy which may not have been noted using traditional electrical calibration methods and one which highlights the importance of both manufacturers and end-users adopting chemical test reactions into their test and validation routines.