邻苯二亚胺纤维素水溶液的荧光行为

目前，用于制造光致发光材料的基材均为合成高分子材料，如聚氯乙烯（ＰＶＣ）等热塑性材料以及不饱和聚酯等热固性材料［１］．天然高分子材料发光性能的研究并不多见．而与合成高分子相比，纤维素的结构特征决定了它易参与化学反应，可用以制备各种用途的功能材料，如高...     

Luminescence quantum yield determination for molecules adsorbed onto solid powdered particles.

A new methodology for the determination of the fluorescence quantum yield of dyes adsorbed onto microcrystalline cellulose is presented and applied to rhodamine 101, cresyl violet and auramine O. It is based on a previously reported method by Ruetten and Thomas (J. Phys. Chem., 1998, 102, 598-606), which is not applicable to the dyes used in the present study. It uses ground-state diffuse reflectance spectra obtained with and without filters, which prevents the luminescence of the dye from reaching the integrating sphere and the photodetector. New equations are presented here, correcting for the fluorescence emission of the dye, which depends on the detector sensitivity. Cut-on filters, which have a transmittance close to unity in the absorption region, and close to zero in the emission region, of the dye are used to obtain corrected reflectance spectra. The influence of the substrate was also taken into account. This methodology may be applied to other probes and surfaces or emissions of a different nature (i.e., phosphorescence or delayed fluorescence), and constitutes a very simple and general procedure to solve the important problem of luminescence quantum yield determination of probes adsorbed onto solid powdered surfaces.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cellulose Synthesized by Acetobacter Xylinum in the Presence of Acetyl Glucomannan

Acetobacter xylinum was cultured in Hestrin-Schramm medium (control medium) and Hestrin-Schramm medium containing acetyl glucomannan (mannan medium). Loose bundles of the cellulose microfibrils are formed in the mannan medium in contrast to the normal ribbons being produced in the control medium. Rapid-freeze and substitution method followed by metal-shadowing revealed the droplet-like structures around the microfibril synthesized in the mannan medium. The cellulose synthesized in the mannan medium was stained heavily by the periodic acid-thiocarbohydrazide-silver proteinate (PATAg) method, while the cellulose synthesized in the control medium was not stained. X-ray diffractometry and FT-IR spectroscopy indicated that the addition of mannan induced a change in the crystal structure from the algal-bacterial type to the cotton-ramie type. Thus the presence of acetyl glucomannan in the medium prevents the assembly of cellulose microfibrils and changes the crystal structure of cellulose.     

紫外光固化的聚氨酯－丙烯酸酯－纤维素复合膜

再生纤维素膜(甘蔗渣浆制)表面直接用紫外光固化聚氨酯-丙烯酸酯制备出防水性复合膜。由红外光谱和扫描电镜研究了复合膜的结构。同时,测定了膜的防水性、力学性能、水汽透过性和尺寸稳定性。实验结果表明,当聚氨酯：丙烯酸酯为40:55(质量比),在400W紫外光下固化5min制得的复合膜具有致密的表面结构和较好的性能,该膜经水浸泡后其断裂强度可达干膜的90%,浸水收缩率和膨胀率均小于2.5%,水汽渗透量仅为再生纤维素膜的1/4.由此表明复合膜的防水性和尺寸稳定性明显提高。此外,该复合膜在可见光区的透光率在80%～90%之间,而且对紫外光有屏蔽作用。     

Preparation and Characterization of Niobium Oxide Coated Cellulose Fiber

The Nb₂O₅/cellulose composite was prepared by reacting α-cellulose with NbCl_5-n(OC₂H₅)_n, in nonaqueous solvent, under nitrogen atmosphere and submitting the obtained material to hydrolysis. An increase in the crystallinity degree is observed in the composite material because the precursor reagent reacts with the amorphous phase of the cellulose fibers. Loadings between 4.5 and 16.0% of the oxide were achieved and in every case the oxide particles uniformly cover the fiber surface. Lewis and Brønsted acid sites were determined by using pyridine as the basic molecular probe.     

Influence of the heating conditions on the thermal and chemical behaviour of solid particles undergoing a fast endothermic decomposition

This paper deals with models describing the thermal and chemical behaviour of solid particles undergoing fast endothermic reactions under the influence of an external heat flux. The heat source temperature is supposed to be constant, to increase with time, or to deliver a simple thermal flash. It is shown that the pyrolysis conditions (reaction temperature, conversion, etc.) depend on the chemical characteristics of the reaction and also to a large extent on the external heating conditions. Relationships are proposed to take into account these parameters. The results are applied to the thermal decomposition of NaHCO₃. The pyrolysis of cellulose is finally chosen in order to show how these operating parameters can also affect the selectivity of a more complex reaction.     

Biodegradable PEO/cellulose‐based solid–solid phase change materials

A series of poly(ethylene oxide) (PEO) blends with cellulose (CEL) or cellulose derivatives—carboxymethyl cellulose (CMC), cellulose acetate (CAC), and cellulose ether (CET)—has been investigated as phase change materials for thermal energy storage. For PEO/CEL blends solid–solid phase transition has been observed in the whole concentration's range; for PEO/CMC and PEO/CET blends solid–solid phase transition has been found for PEO content 25 or 50 and 25 wt%, respectively. Otherwise, solid–liquid phase transition takes place. MTDSC investigations revealed that for PEO/CEL and PEO/CMC blends transition the strongest recrystallization effect (as evidenced by exothermic effect in reversing heat flow) as melting process occurred. FTIR analysis shows a shift of the stretching vibration bands of both the proton‐donor O? H groups from CEL and PEO due to intermolecular hydrogen interactions between the blends' components. Copyright © 2010 John Wiley & Sons, Ltd.     

功能性无机-晶态纳米纤维素复合材料的研究进展与展望

纤维素是自然界储藏量最大,可再生且可生物降解的生物高分子。晶态纳米纤维素是天然纤维素复合材料的结构支撑体,其多级孔道结构,手性液晶排列和活性羟基官能团赋予它优异的模板效应。本篇综述回顾了功能性无机-晶态纳米纤维素复合材料的研究进展。概述组装方法,侧重讨论静电纺丝法,细菌纤维素和纤维素气凝胶模板矿化法,凝胶-溶胶法,溶液浇铸法和静电层贴法的组装特点。扼要介绍了晶态纳米纤维素的形貌和晶体结构,提取方法,排列方式,化学修饰和溶剂等。天然复合材料的生物功能与其多级结构和多元组分的协同效应息息相关,文章以木质纤维素的刚性和海参表皮的化学感应性为例,浅谈晶态纳米纤维素微束的螺旋结构和纤维素复合体的多级结构在仿生组装功能性纤维素复合材料中的应用。最后,作者对晶态纳米纤维素在设计组装功能性复合材料领域的未来方向提出了一些设想,藉此综述抛砖引玉。     

The cellulose system in viscin from mistletoe berries

The cellulose system of the viscous fibrous cellulosic polysaccharide (viscan) in the viscin tissue of the European mistletoe, Viscum album L., was analyzed by chemical and physicochemical techniques including sugar analysis, optical and transmission electron microscopy, X-ray and electron diffraction together with solid state CP/MAS ¹³C-NMR spectroscopy. The results confirmed that in the elongated thin viscin cells, the cellulose microfibrils (having a diameter of around 3 nm) were tightly coiled with their axes perpendicular to the long axis of the cell. Upon stretching these cells became deformed by more than a hundred fold. In such a deformation, the cellulose microfibrils became unwound to be perfectly aligned along the stretching direction. Based on solid-state CP/MAS ¹³C-NMR spectroscopic analysis of the viscin tissue, it was found that its cellulose consisted of I and I polymorphs in the ratio 1:1.