在NaCl溶液中以海藻酸钠为致孔剂制备快速温度响应型多孔聚(N-异丙基丙烯酰胺)水凝胶

用海藻酸钠为致孔剂,在NaCl水溶液中制备了多孔聚(N-异丙基丙烯酰胺)(PNIPAAm)水凝胶,分别用扫描电镜(SEM)和小角X光散射(SAXS)对PNIPAAm水凝胶的多孔结构进行了表征.结果发现,PNIPAAm水凝胶网络中的孔洞相互贯通,随着反应介质中NaCl浓度的增加,孔洞尺寸逐渐增大,孔洞排列越来越有序.相应地,PNIPAAm水凝胶的消溶胀速率随着反应介质中NaCl浓度的增加而提高.当NaCl浓度为0.6 mol/L时制备的PNIPAAm水凝胶,从室温处于平衡溶胀状态快速转移到45℃水介质中,1 min后凝胶的水保留率不足15%,4 min后消溶胀就达到平衡状态.     

抗菌淀粉-聚乙烯醇水凝胶的制备及性能

以环氧氯丙烷为键合剂将胍盐低聚物（PHMG）接枝到淀粉分子上,设计了正交试验优化接枝反应条件。将产物添加到淀粉和聚乙烯醇（PVA）水溶液中,采用化学交联法合成了具有抗菌性能的淀粉-聚乙烯醇（S-PVA）水凝胶,测试了水凝胶的溶胀率、脱水率以及抗菌性能。结果表明：当反应温度为40°C、时间为0.5 h、pH为9时,PHM...     

功能梯度球形水凝胶的化学力学耦合分析

作为一种新型智能材料,水凝胶具有特殊的化学力学耦合性能.采用功能梯度形式可使得水凝胶具有更好的适应性和可调控性.本研究中假设交联密度沿径向按幂函数规律变化,并基于水凝胶的大变形多场耦合一般理论,采用Flory-Huggins自由能函数,建立了功能梯度球形水凝胶在球对称情形的控制方程,并开展了功能梯度球形水凝胶在给定内压和化学势情行的非均匀大变形溶胀行为的理论研究.计算结果表明,不同梯度指数的球形水凝胶的内压、内孔半径曲线和内压、内表面径向伸长率曲线均呈现出一段稳定区间和另一段不稳定区间,说明内压超出某临界值会发生失稳并导致水凝胶的最终破坏.内压的临界值随梯度指数的增大而增大.研究表明,功能梯度球形水凝胶的材料参数(梯度指数、亲疏水特性、交联密度和溶剂分子的体积)和环境化学势对水凝胶溶胀行为具有重要的影响.在给定内表面压力的情况下,功能梯度球形水凝胶内表面的径向位移随梯度指数的改变接近为线性变化,而随其他参数的影响都呈现出明显的非线性.本研究有助于实现水凝胶智能结构和器件在复杂条件下的精准调控.}      

Reinforced Supramolecular Hydrogels from Attapulgite and Cyclodextrin Pseudopolyrotaxane for Sustained Intra‐Articular Drug Delivery

Injectable hydrogels for nonsteroidal anti‐inflammatory drugs’ (NSAIDs) delivery to minimize the side effects of NSAIDs and achieve long‐term sustained release at the targeted site of synovial joint are attractive for osteoarthritis therapy, but how to improve its mechanical strength remains a challenge. In this work, a kind of 1D natural clay mineral material, attapulgite (ATP), is introduced to a classical cyclodextrin pseudopolyrotaxane (PPR) system to form a reinforced supramolecular hydrogel for sustained release of diclofenac sodium (DS) due to its rigid, rod‐like morphology, and unique structure, which has great potential in tissue regeneration, repair, and engineering. Investigation on the interior morphology and rheological property of the obtained hydrogel points out that the ATP distributed in PPR hydrogel plays a role similar to the “reinforcement in concrete” and exhibits a positive effect on improving the mechanical properties of PPR hydrogel by regulating their interior morphology from a randomly distributed style to the well‐ordered porous frame structure. The hybrid hydrogels demonstrate good shear‐thinning and thixotropic properties, excellent biocompability, and sustained release behavior both in vitro and in vivo. Furthermore, preliminary in vivo treatment in an acute inflammatory rat model reveals that the ATP hybrid hydrogels present sustained anti‐inflammatory effect.     

Structural rearrangement and stiffening of hydrophobically modified supramolecular hydrogels during thermal annealing

Dynamic crosslinks formed by thermoreversible associations provide an energy dissipation mechanism to toughen hydrogels. However, the details of the organization of these crosslinks impact the hydrogel properties through constraints on the network chain conformation. The physical crosslinks generated by hydrophobic association of the 2‐(N‐ethylperfluorooctane‐sulfonamido)ethyl methacrylate (FOSM) groups in a random copolymer of N,N‐dimethylacrylamide (DMA) and FOSM provide a simple system to investigate how the hydrogel structure (as determined from small angle neutron scattering impacts the mechanical properties of the hydrogel. The initial hydration of the copolymer at 25 °C leads to a kinetically trapped structure with large‐scale heterogeneities. Heating the hydrogel at 60 °C, which is above the glass transition temperature for the FOSM domains, allows the hydrogel structure to rearrange to reduce the density of network defects and the structural heterogeneities. That effectively increases the crosslink density of the network, which stiffens the hydrogel and decreases the swelling at equilibrium at 25 °C. The processing history determines how the hydrophobes aggregate to form the physically crosslinked network, whose structure defines the mechanical properties of these hydrogels. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1036–1044     

pH reversible micelle transition of a tertiary amine-based gemini surfactant in aqueous solution

In this work, we prepared a tertiary amide-based gemini surfactant (DSTAPA), which contained two pH-sensitive tertiary amide head groups. Then the molecule state distribution and self-assembly transition of the surfactant in aqueous solution were investigated under different pH conditions. The DSTAPA molecules were on the states of double cationic (DSTAPAH²⁺), single cationic (DSTAPAH⁺), and double tertiary amine groups (DSTAPA) under acidic, neutral, and basic conditions, respectively. With the variation of the molecule states, the sample was water-like below pH of 6.8 and immediately transformed to gel-like fluid between pH of 6.8 and 7.8, then changed to white precipitate with the further increase of pH value. Furthermore, the microstructure and regulation mechanism were investigated by rheological measurements, dynamic light scattering, and cryogenic transmission electron microscopy. The appearance and micelle transitions of the DSTAPA aqueous solution are actually owing to the spherical–worm-like micelle transition, leading to dramatic viscosity increase and hydrogel formation. This transition was completely reversible and repeated for at least three cycles. Finally, a reasonable mechanism of the transition was proposed based on the viewpoints of the molecular states and micelle structures. The DSTAPA aqueous system with pH-reversible property has a great potential application in oil and gas production.     

Fine tuning the assembly and gel behaviors of PEGylated polypeptide conjugates by the copolymerization of l‐alanine and γ‐benzyl‐l‐glutamate N‐carboxyanhydrides

Tuning the secondary structure of polypeptide is an effective strategy to modulate the assembly behaviors of polypeptide‐based copolymers. In this study, ring‐opening polymerization of l ‐alanine (Ala) and γ‐benzyl‐l ‐glutamate (BLG) N‐carboxyanhydrides was adopted using mPEG‐NH₂ as the initiator to prepare mPEG‐poly(l ‐alanine‐co‐γ‐benzyl‐l ‐glutamate) (PEAB) copolymers with various Ala to BLG ratios. ¹H NMR spectra and GPC test confirmed their well‐defined chemical structures. FT‐IR spectra indicated that at the powder state, all copolymers adopted both β‐sheet and α‐helical conformations. With the content of PBLG increased, the crystallization temperature and melting points of PEAB copolymers first rose then fell indicated by DSC curves. The self‐assembly of PEAB copolymers in dilute aqueous solution studied by DLS, TEM and circular dichroism spectra showed that PEAB copolymers self‐assembled into nanostructures with diverse morphologies and sizes due to distinct polypeptide conformations. Rheological analysis indicated that the alteration of the polypeptide composition can effectively modulate the modulus of PEAB assemblies in concentrated solutions. In all, copolymerization of two hydrophobic amino acid N‐carboxyanhydrides into the polypeptide block maybe an effective approach for modulating the assembly properties of PEGylated polypeptide. Besides, nanosilver‐encapsulated PEA or PEAB hydrogel showed promising antibacterial effect against Staphylococcus aureus and Bacillus subtillis. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1512–1523     

Sol-Gel Nanometrology: Gated Sampling Can Reveal Initial Sol Formation Kinetics

This report describes a gated sampling approach for studying the initial formation of sol-gel glasses prepared from sodium silicate solution (water glass) and sulphuric acid. Previously described were how changes in particle size and subsequently how sol-gel formation dynamics can be tracked using time-resolved fluorescence anisotropy, by labeling growing silica nanoparticles with suitable fluorescence probes. One limiting factor of this approach was the 2 minute measurement time, which limits this technique for studying the initial sol formation dynamics and limits the measurement precision. Using a continuous flow system and delaying sol flow through different tubing lengths overcomes this problem and allows monitoring of the very early stages of sol formation, second by second after sol preparation, irrespective of the anisotropy measurement time. This technique was applied to studying the initial formation dynamics, within the first 30 seconds, of a 12.01% SiO₂ (w/w), pH 0.66 sol-gel, finding that silica particles of 1.5 nm mean radius are formed within 10 seconds of mixing the sol-gel.     

Peptide dendrimer-crosslinked inorganic-organic hybrid supramolecular hydrogel for efficient anti-biofouling

A novel kind of inorganic-organic hybrid supramolecular hydrogel with excellent anti-biofouling capability was developed. The hydrogel was formed via ionic interaction between the negative-charged sodium polyacrylate (SPA) entwined clay nanosheets (CNS) and positive-charged polyhedral oligomeric silsesquioxane (POSS) core-based generation one (L-Arginine) dendrimer (POSS-R).     

DNA水凝胶在生物传感中的应用和发展

脱氧核糖核酸(DNA)是一种重要的生物分子,具有许多独特的性质如:信息传递、分子识别、可编辑等。DNA水凝胶同时具有DNA分子和水凝胶材料的优势,并且可以引入其他纳米材料获得多功能杂化水凝胶。相比于传统水凝胶,DNA水凝胶具有良好的特异识别能力以及可以按需设计的性质,从而被广泛应用于生物传感领域。本文围绕DNA水凝胶的合成、响应机制以及在传感领域的应用进行综述。按照不同的合成方法可分为线性DNA链缠绕水凝胶、枝状DNA自组装水凝胶、杂合DNA水凝胶。根据传感机制的不同又可以分为包埋封装法和非包埋封装法,包埋封装发法又分为:酶的包埋释放、抗原-抗体的包埋释放、纳米材料的包埋释放。本文总结了近几年DNA水凝胶在重金属离子检测、核酸检测、葡萄糖检测、蛋白质和代谢小分子检测,以及细胞检测等热门领域的研究情况,最后对其未来的发展进行了展望。