疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

3-D-electron microscopy configuration of TMOS wet silica gels prepared by the quick-freeze,deep-etching-rotary-replication technique

Silica gel provides a useful medium for crystal growth; solution growth is confined to pores left free by the polymer during its development. All growth steps depend on the gel structure, which is not completely known for crystal growth conditions. Therefore, a three-dimensional (3-D) visualization has been performed for two TMOS aqueous gels, which are rather fragile: the quick-freeze, deep-etching, rotary-replication method has been applied for sample preparation. An original surface labeling technique has been used for surface recognition. The results concern the distribution of macropores that are responsible for crystal nucleation; micropores whose total volume is larger have not been visualized due to the limits of the method. These results are discussed in comparison with previous data performed by light scattering.     

Thermally initiated frontal polymerization of transition metal nitrate acrylamide complexes

The effect of the thermally initiated frontal polymerization of acrylamide complexes of transition metal nitrates such as those of Mn(II), Co(II), Ni(II), and Zn(II) was disclosed. The rate of the polymerization front propagation was found to be 2?9 × 10^?2cm/c, depending appreciably on sample diameter and density, as well as the presence of radical inhibitor additives. The rate was found to decrease in the series: Co(II) > Ni(II) > Mn(II) > Zn(II). Polymerization was shown to occur directly in the melting region of a complex at 80–100°C to give three-dimensional polymers. A mechanism of the polymerization being initiated with the products of the partial nitrate group decomposition was proposed. © 1994 John Wiley & Sons, Inc.     

Structural change of water by gelation of curdlan suspension

Phase transition of water restrained by curdlan suspension annealed at a temperature from 20 to 110°C was investigated by differential scanning calorimetry (DSC). The melting temperature of water restrained by annealed curdlan discontinuously decreased at around 60°C, while the amount of bound water calculated from enthalpy of melting increased at 60°C, regardless of water content. Using a highly sensitive DSC, curdlan suspension with various concentrations was studied. It was found that an endothermic transition was observed at ca. 58°C in a wide range of concentrations. The transition observed at 60°C is thermo-reversible and both temperature and transition enthalpy are constant even after gel formation. Well equilibrated suspension at a temperature lower than 60°C formed no gel.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

Thermal polymerization of acrylamide during the formation of the structures of acrylamide complexes with metal nitrates

The effects of the composition of Mn^II, Co^II or Ni^II nitrate hydrate — acrylamide (AAM) mixtures and of the duration of their aging at ambient temperature on the structurization of acrylamide complexes and on the character of their thermal polymerization have been studied by scanning and isothermic differential calorimetry. Structurization is a rather prolonged step in the synthesis of acrylamide complexes. The peculiarities and rate of this step are determined by the composition of the mixture and by the nature of the complexforming compound; it yields several structural modifications of the AAM complexes. The thermal polymerization of those structural forms of acrylamide complexes that polymerize at low temperatures may be formally described as polymerization in an acrylamide-nitrate-water mixture. The effective activation energy of the polymerization of acrylamide mixed with Mn^II nitrate hydrate is 45 kJ mol^–1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 679–683, April, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research, Project No. 93-03-4162.     

Calculations of concentration dependences of chemical shifts for acrylamide in water—DMSO mixed solvent

The lattice model of associated solutions was used to calculate the concentration dependences of the chemical shifts of¹³C magnetic nuclei in the acrylamide molecule in water—DMSO solvent. Each pair of bonds between the acrylamide group containing a magnetic nucleus and the neighboring solvent molecule was assumed to additively contribute to the change in the chemical shift of the nucleus in question. The new approach affords the same accuracy in describing the experimental data at any ratios of the solution components. It was shown that the chemical shifts and the excess heat of mixing of the water—DMSO binary solution can be simultaneously described using the same set of energy parameters of the model. The model makes it possible to employ experimental data on chemical shifts for studying intermolecular interactions in solutions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1983–1987, October, 1998.     

Two-component dendritic gel: effect of stereochemistry on the supramolecular chiral assembly

The self-assembly of diaminododecane solubilised by four different stereoisomeric dendritic peptides to form gel-phase materials in toluene was investigated. The second generation dendritic peptides were based on D- and L-lysine building blocks, and each contained three chiral centres. By designing dendritic peptides in which the configurations of the chiral centres were modified, and applying them as gelator units, the assembly of stereoisomers could be investigated. In all cases, the self-assembly of gelator units resulted in macroscopic gelation. However, the degree of structuring was modulated by the stereoisomers employed, an effect which changed the morphology and macroscopic behavior of the self-assembled state. Enantiomeric (L,L,L or D,D,D) gelator units formed fibrous molecular assemblies, whilst the racemic gel (50 % L,L,L : 50 % D,D,D) formed a flat structure with a "woven" appearance. Gelator units based on L,D,D or D,L,L dendritic peptides also formed fibrous assemblies, but small-angle X-ray scattering indicated significant morphological differences were caused by the switch in chirality. Furthermore, the macroscopic stability of the gel was diminished when these peptides were compared with their L,L,L or D,D,D analogues. In this paper it is clearly shown that individual stereocentres, on the molecular level, are directly related to the helicity within the fibre. It is argued that the chirality controls the pattern of hydrogen bonding within the assembly, and hence determines the extent of fibre formation and the macroscopic gel strength.     

Alkali metal salts of acrylamide C3H4NOM (M = Li,Na, and K): Synthesis and vibrational spectra

Alkali metal salts of acrylamide C₃H₄NOM (M = Li, Na, and K) were synthesized for the first time by metallation of acrylamide with alkali metals, their alkyl derivatives, or hydrides. The structures of the compounds synthesized were studied by Raman and IR spectroscopy. Based on the results obtained, an ionic structure was proposed for the salts. The salts were tested as initiators of the anionic polymerization of acrylamide. The catalytic activity of C₃H₄NOM in the polymerization of acrylamide is not lower than that of the well known catalyst, KOBu¹.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2316–2319, September, 1996.