埋层界面和空气表面和频光谱信号贡献的调控

本文研究表明通过膜厚控制和表面等离激元增强方法可有效区分隐藏界面和空气表面的和频振动光谱信号. 以氟化钙基底支撑的PMMA薄膜为模型,观察到隐藏界面和空气表面对和频信号贡献的变化. 通过监控羰基和甲基伸缩振动基团,发现薄PMMA膜的和频信号来自PMMA/空气表面的化学基团-CH₂、-CH₃、-OCH₃和C=O,而厚PMMA膜的和频信号则来自基底/PMMA埋层界面的-OCH₃和C=O基团. 随制膜浓度增大,埋层界面C=O基团的取向角从65°下降到43°,且浓度大于或等于0.5 wt%时,取向角等于45°±2°. 相比之下,空气表面C=O的取向角落在21°∽38°之间. 在金纳米棒存在条件下,表面等离激元可以极大地增强和频信号,尤其是来自埋层界面信号.     

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (I_corr) decreases from 16.7 A/m² for bare material to 0.103 A/m² for 4% coating of HNPs. Applied potential (E_corr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.     

Structural changes in Poly(lactic acid)–zeolite nanocomposites exposed to 60Co gamma rays

Poly(lactic acid) (PLA) nanocomposites containing 3%, 5% and 7% zeolite used in the present research study were prepared by solution casting. The PLA nanocomposites were structurally characterized by Scanning Electron Microscopy and Fourier-transform infrared spectroscopy. The effects of the gamma radiation at the absorbed doses of 10, 15 and 20?kGy on the structures and thermal properties of the nanocomposites were investigated in a tetrahydrofuran solvent. Thermodecomposition tests and analyses were carried within 30–500°C range at the rate of 10°C?min^?1 by thermogravimetric analysis (TG). The activation energies for thermal degradation of the nanocomposites were calculated from their TG data by Flynn–Wall–Ozawa method. The G values of the nanocomposites were calculated based on molecular weights which were measured by means of gel permeation chromatography before and after the gamma irradiation. The E_a and molecular weight results showed that addition of zeolite to the PLA affected the radiation resistance of the polymer.     

Versatility of the dipolar filter selection: from 1H nuclear spin diffusion experiment to the measurement of nuclear Overhauser effect in homopolymer melts

Dipolar filters select ¹H magnetization according to local dipolar dephasing, which corresponds to site mobility in systems with heterogeneous molecular mobility. Combined with a conventional exchange experiment, it is usually applied to polymeric samples exhibiting structures on the nanometer length scale associated with a strong dynamic contrast. There, the resulting ¹H nuclear spin diffusion experiment yields the size of the structure. When the same experiment is applied to homopolymer melts exhibiting a weak dynamic contrast and dynamic heterogeneities on significant shorter length scales, the recorded magnetization decay is in agreement with decays expected from a heterogeneous nanostructure. However, dipolar filters actually can also select mobile parts of the repeat unit, e.g. the end of the alkyl side chains and the subsequent magnetization transfer then can occur via cross relaxation due to non coherent zero-quantum transitions (nuclear Overhauser effect, NOE). The difficulties of distinguishing these two cases are examined and it is demonstrated that NOE experiments exploiting magnetization selection via the dipolar filter allow quantifying the local dynamics of the side chains. This opens new possibilities for measurements of local dynamics in non isotopically labeled homopolymer melts.     

Poly(butylene terephthalate)/phenoxy blends: Synergistic behavior in mechanical properties

The mechanical properties of miscible poly(butylene terephthalate) (PBT)/poly (hydroxy ether of bisphenol A) (phenoxy) blends obtained by melt mixing have been studied by means of the tensile test. The crystallinity of the blends has been studied by means of DSC and density measurements. A synergistic behavior, principally in the break properties, at high PBT contents in the blends is observed. As can be seen from the torque and density data, this synergistic behavior is related with the high level of miscibility which seems to exist at high PBT contents compared with that of the high phenoxy content region.     

Thiolated poly(ε-caprolactone) macroligand with vacant coordination sites on gold substrate: Synthesis and surface characterization

Surface-confined telechelic poly(ε-caprolactone) macroligand with two distinct functional groups per polymeric chain has been synthesized and characterized. The molecular microstructure of the macroligand with regard to the properties of the end-capped functionalities and with those on surface substrate has been studied by solution and surface analytical methods (i.e., X-ray photoelectron spectroscopy (XPS), grazing angle reflectance-Fourier transform IR spectroscopy (GA-FTIR), water contact angle measurements, and atomic force microscopy (AFM)) to elucidate the structure and properties of such multifunctional polymer on gold (1 1 1) substrate.     

Ion-exchange resin decomposition in supercritical water

Abstract

Using supercritical water oxidation, the cation exchange resin was decomposed fast and completely to water, carbon dioxide and sulfuric acid. While the resin decomposition yield increased with the reaction time and the amount of hydrogen peroxide added as oxidizing agent, it was constant in the resin concentration from 0.14 to 1.9 dry resin weight percent to water. More than 99% of the cation exchange resin was decomposed with hydrogen peroxide added in the amount of 7 times the stoichiometric value at 673 K and 30MPa for 30 minutes of the reaction time. The cation exchange resin is decomposed through two main reaction pathways. One has a rate controlling intermediate such as acetic acid whose decomposition rate was very slow, and the other does not have stable intermediates. The decomposition of the acetic acid is a significant factor for the complete decomposition of the resin, although it does not dominate the whole resin decomposition. A simple kinetic model that estimates the resin decomposition yield was developed.     

TIME-RESOLVED SAXS/WAXS STUDY OF PHASE BEHAVIOR AND CRYSTALLIZATION IN POLYMER BLENDS

Real-time SAXS and WAXS patterns have been simultaneously obtained during isothermal melt-crystallization of blends of low-molecular-weight poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA). The analysis of results shows that the originally homogeneous, single-phase polymer blend separates into two phases. The PMMA molecules diffuse from the blend and form completely segregated regions while PEO starts to crystallize. The first and dominating effect at the beginning of crystallization is the formation of unstable lamellae of nonintegrally folded chains (NIF). The real-time crystallinity and density of the PEO crystalline phase in absolute units were obtained from the time-resolved SAXS/WAXS results. The structure development proceeds in two steps. A very fast evolution of PEO crystals from the melt starts to crystallize in disordered NIF lamellae with thick amorphous interlayers and with a lower density of crystalline phase. The steep growth of crystallinity and crystalline density mean quick thickening of crystalline part of lamellae and improvement of their crystalline structure. In the second step, the structure of the crystalline phase gradually improves and crystallinity grows very slowly. The recrystallization of NIF lamellae into extended chain lamellae (EC) and lamellae with once folded chains (1F) proceeds during both stages of crystallization.     

Thermal Behavior of an Fe(III)‐2,9,16,23‐Tetramidephthalocyanine‐Grafted Poly(N‐Vinylcarbazole)

Abstract

The introduction of 2,9,16,23‐tetramide‐Fe(III)phthalocyanine [Fe(III)taPc] units into phosphorylated poly(N‐vinylcarbazole) yields an amorphous grafted polymer containing free carbazolyl groups, phosphonic acid attached to carbazolyl groups, and grafted Fe(III)taPc units as evidenced by infrared spectroscopy. Several thermal transitions were detected by differential scanning calorimetry (DSC). The thermodegradation of the grafted sample, analyzed by simultaneous thermogravimetry‐differential thermal analysis (TG‐DTA), showed successive endo‐ and exothermal reactions resulting from the development of a cross‐linked structure. To determine kinetic parameters, both isothermal and dynamic experiments were performed at the different steps of the degradation process and theoretical methods were applied.     

Toughening poly(lactic acid) (PLA) through in situ reactive blending with liquid polybutadiene rubber (LPB)

Abstract

Liquid polybutadiene rubber (LPB) was blended with poly(lactic acid) (PLA) through reactive and non-reactive routes to enhance the toughness of the PLA. The reactively blended PLA (PBR10) was prepared by melt blending the PLA with the LPB in the presence of dicumyl peroxide (DCP), a radical initiator, while the PB10 was just melt blended without the DCP. Fourier transform infrared (FTIR) spectra and wide-angle X-ray diffraction (WAXD) patterns were used to study the molecular structure of the blends. Properties were investigated through universal testing machine (UTM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscope (SEM) analysis, and rheological measurements. The results indicated that the radical crosslinking by the DCP could increase the compatibility between the PLA and LPB and disperse the rubber particles at the nanoscale in the PLA matrix. As a result, the toughness and melt viscosity of the PLA was significantly enhanced through the reactive blending, which is promising for the practical application of the modified PLA in the area of packaging.