Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.     

催化动力学荧光法测定中草药对羟基自由基的清除率

苯甲酸具有很弱的荧光,在Co2+的催化下,过氧化氢能氧化苯甲酸发出强的荧光。中草药提取物可以清除溶液中的·OH, 使产物的生成量减少, 从而使溶液的荧光增加程度降低。据此原理建立了一种测定中草药对羟基自由基清除率的催化动力学荧光新体系。当中草药的浓度为4.0 mg(干重)·mL-1时,测得紫花地丁、苍术和赤芍对羟基自由基的清除率分别为60.8%,40.1%和94.3%。该方法与分光光度法测定结果相比无显著性差异。     

Hydrothermal Preparation of Photoluminescent Graphene Quantum Dots Characterized Excitation‐Independent Emission and its Application as a Bioimaging Reagent

Zero‐dimensional photoluminescent (PL) graphene quantum dots (GQDs) that can be used as the cell‐imaging reagent are prepared by a hydrothermal route using the graphene oxide (GO) as the carbon source. Under the optimized hydrothermal conditions, an initial hydrogen peroxide concentration of 0.5 mg mL^?1 at 180 °C for 120 min, the GO sheets can be cut into nanocrystals with lateral dimensions in the range of 1.5–5.5 nm and an average thickness of around 1.1 nm. The as‐prepared GQDs exhibit an abundance of hydrophilic hydroxy and carboxyl groups and emit bright blue luminescence with up‐conversion properties in a water solution at neutral pH. Most interestingly, they indicate excitation‐independent emission characteristics, and the surface state is demonstrated to have a key role in the PL properties. The fluorescence quantum yield of the GQDs is tested to be around 6.99% using quinine sulfate as a standard. In addition, the as‐prepared GQDs can enter into HeLa cells easily as a fluorescent imaging reagent without any further functionalization, indicating they are aqueous stability, biocompatibility, and promising for potential applications in biolabeling and solution state optoelectronics.     

Constant time steady gradient NMR diffusometry using the secondary stimulated echo

A pulse sequence producing a second stimulated echo is suggested for the compensation of relaxation and residual dipolar interaction effects in steady gradient spin echo diffusometry. Steady field gradients of considerable strength exist in the fringe field of NMR magnets, for instance. While the absolute echo time of the second stimulated echo is kept constant throughout the experiment, the interval between the first two radiofrequency pulses is augmented leading to a modulation of the amplitude of that second stimulated echo by self-diffusion only. The unique feature of this technique is that it is of a single-scan/single-echo-signal nature. That is, no reference signals neither of the same pulse sequence nor of separate experiments are needed. The new method was tested with poly(ethylene oxide) melts and proved to provide reliable data for (time dependent) self-diffusion coefficients down to the physical limit (D approximately 10(-15)m(2)/s) when flip-flop spin diffusion starts to become effective.     

微接触印刷法制造聚合物多层次准三维立体微结构

直接用聚合物稀溶液作为“印墨”进行微接触印刷,制作了诸如聚苯乙烯和聚甲基丙烯酸甲酯等聚合物的微细结构,通过重复交叉盖印得到多层次准三维立体微结构,并用可聚合的双(甲苯磺酸)-2,4-己二炔-1,6-二醇脂的丙酮稀溶液作微接触印刷,观察了微条纹上的聚合.对聚合物溶液的微接触印刷的过程中溶剂挥发等因素的影响进行了观察分析,结果表明,溶剂挥发时间对微图形的准确复制是十分重要的,过长或过短的溶剂挥发时间都不利于得到清晰精确的微结构.     

Rheological Behaviors and Properties of Poly (Ether Ether Ketone) In-Situ Blends: Effect of Chemical Structure of Added Thermotropic Liquid Crystalline Polyarylates

Abstract

Two kinds of thermotropic liquid crystalline polyesters (TLCP) with different chemical structures were used as flow modifiers during the melt spinning of poly (ether ether ketone). One of TLCPs, named PAT-S, was a kind of aromatic polyester synthesized from 4-acetoxybenzoicacid and 6-hydroxy-naphthoic acid, and the other one named, PEEKAR, was a block copolymer based on poly (ether ether ketene) (PEEK) oligomers and PAT-S oligomers. The effects of the chemical structures of the prepared TLCPs on the rheological behavior of the TLCP/PEEK blends were measured by rheological measurements, and then the structure and properties of the TLCP/PEEK in-situ blend fibers were studied by a series of methods, including differential scanning calorimetry (DSC), wide angle X-ray diffraction (WRXD), optical microscopy (OM), scanning electron microscopy (SEM), orientation degree tests, mechanical properties tests, etc. The results showed that the melt viscosity of PEEK could be effectively reduced by nearly 20% by adding a small amount of PEEKAR or PAT-S with the viscosity reducing effect of PEEKAR on PEEK being greater than that of PAT-S; this was mainly caused by the better compatibility between PEEK and PEEKAR because of the similar segment structures. The crystallinity of the PEEK fibers increased by nearly 50% with addition of both TLCPs, indicating that both the PEEKAR and PAT-S could serve as nucleating agent as well. The results from the morphology analysis clearly proved that PEEKAR had a better compatibility with the PEEK resin compared with PAT-S. The tensile strength of the PEEK fibers could be improved to some extent by adding PEEKAR, while it was obviously reduced after adding PAT-S.     

Ultrasound triggered cell death in vitro with doxorubicin loaded poly lactic-acid contrast agents

Traditional chemotherapy generally results in systemic toxicity, which also limits drug levels at the area of need. Two ultrasound contrast agents (UCA), with diameters between 1–2 μm in diameter and shell thicknesses of 100–200 nm, composed of poly lactic-acid (PLA), one loaded by surface adsorption and the other loaded by drug incorporation in the shell, were compared in vitro for potential use in cancer therapy. These poly lactic-acid (PLA) UCA platforms contain a gas core that in an ultrasound (US) field can cause the UCA to oscillate or rupture. Following a systemic injection of drug loaded UCA with external application of US focused at the area of interest, this platform could potentially increase drug toxicity at the area of need, while protecting healthy tissue through microencapsulation of the drug. In vitro toxicity in MDA-MB-231 breast cancer cells of the surface-adsorbed and shell-incorporated doxorubicin (Dox) loaded UCA were examined at 5 MHz insonation using a pulse repetition frequency of 100 Hz at varying pressure amplitudes. Both platforms resulted in equivalent cell death compared to free Dox and US when insonated at peak positive pressure amplitudes of 1.26 MPa and above. While no significant changes in cell death were seen for surface adsorbed Dox-UCA with or without insonation, cell death using the platform with Dox incorporated within the shell increased from 16.12% to 25.78% (p = 0.0272), approaching double the potency of the platform when insonated at peak positive pressure amplitudes of 1.26 MPa and above. This mechanism is believed to be the result of UCA rupture at higher insonation pressure amplitudes, resulting in more exposed drug and shell surface area as well as increased cellular uptake of Dox containing polymer shell fragments. This study has shown that a polymer UCA with drug housed within the shell may be used for US-triggered cell death. US activation can be used to make a carrier significantly more potent once in the area of need.     

红外光谱法测定聚(乳酸-苯丙氨酸)共聚物的含量

分别以苯丙氨酸和乳酸为原料合成了3-苯甲基-2,5-吗啉二酮(PMD)与丙交酯(LA),以PMD和LA作为聚合单体经开环聚合分别得到PMD均聚物(PPMD)、丙交酯均聚物(PLA)及聚(乳酸-苯丙氨酸)共聚物。对合成的均聚物进行红外分析,确定1 671.53和870.82 cm-1处的吸收峰分别为PPMD和PLA的特征峰。根据以上两种特征吸收峰并以朗伯-比耳定律为理论依据,建立了利用红外光谱法测定聚(乳酸-苯丙氨酸)共聚物含量的方法。实验测定的标准工作曲线为y=0.055 67x+0.1091,r=0.999 3。利用该标准工作曲线定量测定了共聚物组分含量,其结果与1H NMR测定值一致,相对误差在2％以内,证明红外光谱法可方便、快捷地测定聚(乳酸-苯丙氨酸)共聚物组分含量,且适用于其他聚(乳酸-氨基酸)共聚物的含量测定,具有一定的实用性及推广性。     

Proton induced modification in Poly(ethylene terephthalate)

A systematic investigation of 62 r MeV proton irradiated Poly(ethylene terephthalate) (PET) has been carried out using Fourier Transformed Infrared Spectroscopy, thermogravimetric analysis, differential scanning calorimetry and X-ray diffraction spectroscopy. The experiments revealed a restoration of the crystalline matrix and simultaneous decrease in thermal stability in the irradiated polymer as a function of dose, indicating that PET underwent both degradation and cross-linking by proton irradiation.     

Concerning free volume quantities and the glass temperature

Free volume quantities proposed earlier by Boyer and Simha in connection with the glass transition are reformulated by taking into account the temperature dependence of the thermal expansivities α _l and α_g for the liquid and the glass, respectively. This necessitates an extrapolation of the liquid to temperatures below Tg which is performed by means of the reduced volume-temperature function established and given a theoretical foundation previously. For the glass, low temperature experimental data, encompassing all relaxations occuring below T_g, are required.

Two polymer series are examined in detail, namely, poly(methacrylates) and poly(vinyl) alkyl ethers, where α_g has been measured between at least 30°K and T_g. Results for poly(methylacrylate) and poly(styrene) are also given. The systematic decrease in the product (αl - αg) · T|_T=Tg with increasing length of the side chain noted previously is considerably reduced but not eliminated when the appropriately corrected expression is substituted instead. However, the free volume fraction related to the quantity αlT|_T=Tg remains more nearly invariant in the polymers analyzed.

An alternative treatment is discussed which considers an occupied volume expanding below T_g by a mechanism of thermal vibrations solely. Experimental and theoretical means of obtaining this quantity arc suggested.