Injectable poloxamer/graphene oxide hydrogels with well‐controlled mechanical and rheological properties

Although significant progress has been made in the design and application of injectable hydrogels for biomedical applications, concurrent control of rheological and mechanical properties of injectable hydrogels has remained as an open challenge to the researchers. In this work, we introduce and put into practice a photo‐curable poloxamer (also known as Pluronic)/graphene oxide (Plu/GO) injectable hydrogel with well‐controlled rheological and mechanical properties. Acrylate group was anchored to hydrogel structure to endow photo‐crosslinking ability through decelerating degradation rate of poloxamer hydrogels after injection. It was found that the modified Plu remains stable in biological media for a long‐term period without significant weight loss. Rheological properties of hydrogels were also carried out as essential prerequisite for an ideal injectability via frequency sweep, flow curve, recovery, and yield stress before and after modification, signifying shear‐thinning behavior of Plu/GO hydrogels with high recoverability. The viscosity of shear‐thinning‐like hydrogels dropped at higher shear stress, which facilitated injection process. Moreover, mechanical behavior of Plu was optimized by manipulating the content of Plu, degree of modification with reactive precursor, curing, and particularly incorporation of GO without deteriorating effects on rheological behavior of Plu.     

A simple swelling and anchoring method for preparing dense and stable poly(ethylene oxide) layers on polystyrene surfaces

In order to obtain dense and stable poly(ethylene oxide) (PEO) layers for reducing protein adsorption, polystyrene (PS) plates were first soaked in chloroform/methanol mixed organic solvent to swell the polymer. The swelled PS plates were then immersed into Pluronic F127 (amphiphilic block copolymer) aqueous solution, Pluronic F127 molecules were adsorbed favorably on the swelled PS surfaces. After evaporation of organic solvent, the adsorbed Pluronic F127 molecules were trapped and anchored permanently on the PS substrates. The dense and stable PEO layers anchored on the PS surfaces can effectively inhibit protein adsorption.     

Two Gel States of a PEO‐PPO‐PEO Triblock Copolymer Formed by Different Mechanisms

Two gel states of a PEO‐PPO‐PEO (Pluronic P103) triblock copolymer in water are investigated using small‐angle X‐ray scattering, rheology and differential scanning calorimetry. The first gel state turns out to be the hexagonal microphase while the second gel state, showing turbidity change with four distinct regions, is somewhat disrupted. The second gel is moreover not thermoreversible as evidenced by rheology. Based upon the present study, two different gelation mechanisms for aqueous PEO‐PPO‐PEO solutions are proposed.     

Water-induced micellar structure change in Pluronic P103/water/o-xylene ternary system

Both laser light scattering (LLS) and small-angle X-ray scattering (SAXS) were used to study the water-induced formation and structure of micelles and supramolecules of Pluronic P103 [(EO)₁₇(PO)₆₀(EO)₁₇] in o-xylene, a selective solvent for the long middle block. In pure o-xylene, P103 molecules exist as unimer coils with an equivalent hard-sphere radius of 1.6 nm even at fairly high concentrations. Micelles with a PEO/water core and a PPO dominated corona were formed in the presence of water when the P103 concentration ≥0.046 g/mL. The size and structure of micelles have been studied as a function of solubilized water content Z (the molar ratio of water to EO units) in micelles. The micelles change from a somewhat open structure with some EO units either dangling out of the micellar core or being incorporated into neighboring micellar cores at low Z values to a flower-like structure with relatively sharp interface at high Z values. At low Z values (< about 2.9), micelles tend to have a structure with part of the poorly solvated PEO blocks present in the corona. With more water added to the core, the PEO blocks in the corona gradually entered into the core, and the PPO blocks backfolded to form loops. With increasing Z, the micellar core radius, R_c, and the hard-sphere volume fraction, ϕ, of micelles increased; the aggregation number, N, kept nearly a constant; but the hydrodynamic radius, 〈R_h〉₀, and the corona thickness, R_s, decreased. At high Z values (> about 2.9), micelles have a flower-like structure with the two end PEO blocks belonging to the small micellar core. With increasing Z, the values of R_c, ϕ, and N increased, while R_s kept nearly a constant. In the concentrated regime (C > 0.30 g/mL), a stiff polymer network at a critical ϕ value of 0.49 was formed. The supramolecular structures with a face-center cubic packing, and a possible hexagonal packing at higher polymer concentrations (i.e. > 0.55 g/mL), were observed, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 889–900, 1998     

Salt induced micellization of very hydrophilic PEO-PPO-PEO block copolymers in aqueous solutions

Symmetrical poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), PEO-PPO-PEO, triblock copolymers with 80% polyethylene oxide (PEO, the hydrophilic end blocks) and polypropylene oxide (PPO, the hydrophobic middle block) usually remain as molecularly dissolved at ambient temperature even at fairly high-concentrations (2 wt.% or more). However, the micellization is induced at lower concentration/temperature in the presence of salts. The results on salt induced micellization from four such hydrophilic copolymers Pluronic^® F38, F68, F88 and F108 obtained from several independent techniques are described. FTIR and fluorescence results provide essentially identical critical micelle temperatures (CMTs) showing marked decrease with increase in PPO molecular weight and in the presence of salt. These copolymers were weakly surface active and did not show a clear break point in surface tension concentration plot typical of surfactants. While addition of salt decreases the cloud point, no significant micelle growth was observed even at temperature close to cloud point (CP). Marked increased in solubilization of an oil dye was observed in presence of KCl. Different methods showed good agreement in temperature/salt-induced micellization of these hydrophilic copolymers.     

Thermal and FTIR Characterization of Films Obtained From Carbopol/Surfactant Aqueous Solutions

Journal of Thermal Analysis and Calorimetry - The suitability of differential scanning calorimetry (DSC) as a routine technique to characterize polymer/surfactant interactions in aqueous medium was...     

Pre-irradiation of surfactants to enhance their capacity to solubilise drugs and dyes

The present work has used pre-irradiation of surfactants in order to enhance their capacity to solubilize hydrophobic drugs and dyes. Aqueous solution of two pluronic surfactants viz., F-127 and P-123 were subjected to gamma radiation. These irradiated surfactant solutions were used to solubilize five drugs such as ornidazole, tinidazole, ciprofloxacin, aceclofenac, and methylparaben, and two dyes, methyl orange and eosin yellow. Their capacity for enhancing solubilisation was compared with that of unirradiated surfactants. The irradiated surfactant solutions displayed 0.88%–31.9% higher solubilisation compared to unirradiated surfactant solutions. This phenomenon of enhancement in solubility is explained through changes in the physical properties like decreased surface tension and increased hydrodynamic radius in irradiated block polymeric surfactants. Irradiation of surfactants for enhancing their capacity to solubilize hydrophobic chemical entities has been used for the first time.     

芘在Pluronic两亲嵌段共聚物胶团中的增溶

用稳态荧光法研究芘（Py）在Pluronic两亲嵌段共聚物胶团水溶液中的增溶,结果表明共聚物分子中的PPO实际含量越大,越有利于Py的增溶。加入无机盐KCl导致生成了表面较少水化的较大胶团,并且由于KCl解离产生的离子使溶剂极性增加,这些因素促进了Py的增溶。     

Synthesis and characterization of amphiphilic fluorinated pentablock copolymers based on Pluronic F127

The synthesis and self‐assembly behavior of pentablock copolymers consisting of Pluronic F127 (PEO₁₀₀‐PPO₆₅‐PEO₁₀₀) and poly(2, 2, 3, 3, 4, 4, 5, 5‐octafluoropentyl methacrylate) (POFPMA) is herein described. Using the difunctional potassium alcoholate of F127, K⁺O^–‐(PEO₁₀₀‐PPO₆₅‐PEO₁₀₀)‐O^–K⁺, as the macroinitiator, the POFPMA‐F127‐POFPMA pentablock copolymers were synthesized via oxyanion‐initiated polymerization. The chain length of POFPMA can be controlled by the original molar ratio of macroinitiator to OFPMA monomer, that is, F‐monomer. The composition and chemical structure of POFPMA‐F127‐POFPMA pentablock copolymers have been characterized by FTIR, ¹HNMR, and ¹⁹F NMR spectroscopy, and gel permeation chromatography techniques. The solution behavior of POFPMA‐F127‐POFPMA copolymers was investigated by the methods of surface tension, cloud point, transmission electron microscopy, and high performance particle sizer (HPPS). The results indicate that these Pluronic F127‐based block copolymers modified with fluorinated segments possess relatively high surface activity and low cloud points, depending on various factors, such as the length of fluorinated block, the concentration of the copolymers in aqueous solution, and the adscititious inorganic salt. TEM measurements showed that the pentablock copolymers can self‐assemble in aqueous solution to form various micellar morphologies. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3029–3041, 2008     

Diffusion Coefficients and Structure Properties in the Pluronic F127/n‐C4H9OH/H2O System

Abstract

Diffusion coefficients of different aggregates in aqueous solutions formed by an amphiphilic block copolymer, Pluronic F127 (F127), were determined by cyclic voltammetry, and the critical micelle concentration (CMC, 4.31 × 10^?4 mol L^?1) of F127 was obtained. The added n‐butanol facilitates the formation of micelles from the monomers of F127 and makes the critical micelle temperature (CMT) of F127 solutions decrease. The diffusion coefficient of the F127 micelles decreases relatively fast at first with increasing n‐butanol and then the decreasing trend slows after the solubilization of n‐butanol in micelles reaches maximum.