Modification of bonding properties and microstructure of resin-cement interface by coupling agents

To solve the problem of organic-inorganic light conductive composite interface features, transparent resin and cement matrix were used as carriers to further study features of the organic-inorganic interface formed by transparent resin and cement matrix and the interface modification of the coupling agent. The bond strength, micro-hardness, microstructure and surface morphology of a resin light conductive cementitious materials (RLCCM) interface were evaluated by tests of tensile and oblique shear, micro-hardness, environmental scanning electron microscopy, and atomic force microscope. The results show that the silane A-151 and aluminate coupling agent could significantly improve interface bond properties of RLCCM. At 7 d, the interface tensile bond strength of the silane A-151 and aluminate coupling agent increased by 117 and 105%, respectively. At 28 d, strength on average increased by 73%. At 7 d, interface shear strength the silane A-151 and aluminate coupling agent of 45° increased by 43 and 53%, respectively, At 28 d, strength on average increased by 40%. The transparent resin performance weakened region thickness up to 100 μm; the hardness of the transparent resin in the transition region was increased by 19.6 and 39.9%, respectively. Silane coupling agent A-151 and cement hydration products formed flat spherical particles with diameter of approximately 78 nm, and these particles mosaicked and fused in the surface of the hydrate; therefore, the surface became denser and smoother.     

囚禁弱相互作用玻色气体的势场优化准则

根据Thomas-Fermi近似,在基于最小动量态上玻色-爱因斯坦凝聚的前提下,研究了囚禁弱相互作用玻色气体势场的最优化问题.导出了指数吸引势阱中有效势场和粒子数极限判据,粒子数给定时,可由此判据求出所需势场强度;势场强度给定时,可由此判据求出粒子数极限.根据吸引相互作用系统的稳定性以及求出的排斥相互作用的最大粒子数极限,结合有效势场判据,分别给出了囚禁吸引和排斥相互作用玻色气体时,势场强度的最佳取值范围. 关键词： 玻色-爱因斯坦凝聚 弱相互作用 粒子数极限 势场强度     

ICF靶用空心玻璃微球耐压性能测试

 利用自行研制的空心微球耐外压装置和充气装置，测试了目前激光惯性约束聚变实验打靶使用的空心玻璃微球耐内压能力和耐外压能力。空心玻璃微球采用液滴法制备，直径为180～250 mm、壁厚为0.8~4.0 mm。理论计算表明，当微球纵横比超过90时，耐外压能力与球壳材料的杨氏模量有关，由此测量得到的空心玻璃微球杨氏模量为55~75 GPa。玻璃微球的耐内压能力主要与球壳材料的抗拉强度有关，实验测量得到的玻璃微球抗拉强度为90~140 MPa。     

Modification of surface properties of polyamide 6 films with atmospheric pressure plasma

To investigate the effect of the different plasma gases treatment on the surface modification of atmospheric pressure plasma, polyamide 6 films were treated using pure helium (He), He/O₂ and He/CF₄, respectively. Atomic force microscopy (AFM) showed rougher surface, while X-ray photoelectron spectroscopy (XPS) revealed increased oxygen and fluorine contents after the plasma treatments. The plasma treated samples had lower water contact angles and higher T-peel strength than that of the control. The addition of small amount of O₂ or CF₄ to He plasma increases the effectiveness of the plasma treatment in polymer surface modification in terms of surface roughness, surface hydrophilic groups, etching rate, water contact angle and bonding strength.     

类He离子的电子碰撞激发截面

利用扭曲波方法计算类He离子的电子碰撞激发截面。靶波函数采用HFS自洽场波函数,本文计算了若干元素从基态(1¹S)到2¹S,2¹P,2³S,2³P的跃迁。计算结果以碰撞强度的形式给出。入射电子能量从激发阈能开始到x=10,计算结果与已有的结果作了比较,分析表明,在大多数情况下,结果是满意的。     

Determination of the Gamow–Teller strength function for the neutron-deficient isotopes In

The Gamow–Teller β decays of the neutron-deficient indium isotopes ^104–107In have been investigated by using total absorption γ-ray spectrometry on mass-separated sources. The experimental Gamow–Teller strength, deduced as a function of the excitation energy in the daughter nuclei ^104–107Cd, is compared to shell-model predictions.     

Electronic structure of C60 films

A complete set of fundamental optical functions of fullerite (C₆₀) films in energy ranges of 2.5–5.0 and 4.0–9.0 eV is calculated using the known spectra of the imaginary and real parts of the dielectric constant. An integrated spectrum of the dielectric constant is decomposed into elementary components. Three basic parameters of each component (the maximum and halfwidth energies and oscillator strength) are determined. Based on the known theoretical calculations of fullerite zones, a scheme of the nature of these components of the dielectric constant is suggested. Udmurt State University, 71, Krasnogeroiskaya Str., Izhevsk, 426034, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 66, No. 2, pp. 227–232, March–April, 1999.     

具有高机械强度的掺Er~(3 )∶TeO_2-Nb_2O_5玻璃的光谱性质研究

熔制了掺铒碲铌玻璃样品(100-X)TeO2-XNb2O5(X=5,10,15,20mol%),测试了其密度、折射率、转变温度、析晶温度、维氏机械强度、吸收光谱、荧光光谱、荧光寿命等参量。利用Judd-Ofelt和McCumber理论分别计算了铒离子强度参量Ωt(t=2,4,6)和受激发射截面σemi的大小,研究了掺铒碲铌玻璃样品光谱参量对Nb2O5成分的依赖性,并与典型的碲锌钠玻璃(75TeO2-20ZnO-5Na2O)在热学、机械强度、光谱性质和放大品行四个方面进行了比较.     

等离子体屏蔽效应对原子能级和振子强度的影响

利用Debye模型,研究了等离子体屏蔽效应对热等离子体中原子能级和振子强度的影响.通过在MCDF模型中引入等离子体屏蔽效应,计算了MnXXII-BrXXII等11个类Be离子在等离子体环境下2s²—［2s_1/2,2p_1/2］₁和2s²—［2s_1/2,2p_3/2］₁跃迁的能级和振子强度.计算结果表明,等离子体屏蔽效应使得类Be离子2s²—［2s_1/2,2p_1/2］₁跃迁的激发能量增大,从而导致谱线蓝移现象;并且随着屏蔽效应的不断增强,蓝移的程度会逐渐加大.屏蔽效应对于2s²—［2s_1/2,2p_3/2］₁跃迁的振子强度也有类似的影响. 关键词： Debye 等离子体屏蔽 跃迁能级 振子强度     

铝的动态屈服强度测量及再加载弹性前驱波的形成机理分析

利用激光干涉测速技术(VISAR)测量LY12铝合金在20—34 GPa冲击压力下经历加载-卸载和加载-再加载过程的样品/窗口界面粒子速度剖面，采用AC方法确定了具有较高精度的动态屈服强度值.实验结果和文献发表的数据具有较好的一致性.通过以平面焊接方式制作组合飞片，克服了组合飞片在气炮发射过程中可能发生分离的技术困难，使铝的动态屈服强度测量压力范围从22 GPa扩展到了34 GPa.同时，根据对不同实验条件下的加载-再加载过程的比较，对再加载弹性前驱波的形成机理进行了讨论，认为位错是形成该现象的主要原因.