The liquid crystal properties of symmetric and non-symmetric dimers based on the azobenzene mesogenic group

A novel system of symmetric and non-symmetric dimers containing azobenzene groups has been synthesized and studied in an attempt to understand further the molecular origins of the intercalated smectic phases. For the non-symmetric dimers, the lack of symmetry was derived solely from the differences in length of the two terminal alkyl chains. Both the spacer and terminal chain lengths were varied. The spacer length was found to exert a profound influence on the clearing temperatures of these materials and a large odd-even effect was observed for the series. The smectic A phase stability was observed to increase with the terminal chain length, yet decrease with increasing spacer length. X-ray diffraction has revealed the structure of the smectic A phase of both the symmetric and non-symmetric azobenzene dimers to be of the monolayer type and not intercalated. The existence of the intercalated phase has previously been explained in terms of either a charge-transfer interaction, or by an electrostatic quadrupolar interaction. However, it has been thought that it may also be the result of an excluded volume or space filling constraint. For the non-symmetric liquid crystal dimers described here, a charge-transfer interaction should be minimal, as should the stabilization from the quadrupolar interaction between the two mesogens. However, it appears that some sort of specific interaction is required to stabilize the intercalated structure.     

基于主动式时间反转镜的声呐目标强度测量研究

为提高目标强度测量过程中的抗噪声、混响以及浅海多途干扰性能,从军标文件中的目标强度测量方法以及主动式时间反转镜的基本原理出发,经过研究和推演,发现可将基于单阵元的主动式时间反转镜与相关器结合应用于目标强度测量过程,提出了一种新的目标强度测量方法。该方法利用了主动式时间反转镜的抗多途特性,使得测量具有抗多途的性能;利用噪声与信号的不相关特性,算法结合相关器起到了很好的抗随机噪声效果;混响中的体积混响是随机的,算法具有抗体积混响的性能。论文分别从理论仿真和水池实验验证了算法的有效性和正确性。     

The mosaic structure design to improve the anchoring strength of SiOx@C@Graphite anode

Silicon oxide (SiO_x)-based anodes have aroused great interest as the most promising alternative anode in the practical application of high-performance lithium-ion batteries. However, the electrochemical performance is inhibited because of the large volume change, and the electrode structure deteriorates during the cycling process, which hinders their practical application. In this article, a novel fabrication method for the synthesis of high-performance SiO_x@C@Graphite composites is presented. SiO_x particles are anchored on the graphite surface by chemical vapor deposition and compression molding. This structure makes up the shortcomings of poor electrical conductivity and poor bonding strength between SiO_x and graphite particles. It is beneficial to form a stable solid electrolyte interface and helps to maintain the structural integrity of electrode materials. As a result, the synthetic SiO_x@C@Graphite anode shows a high reversible capacity (2698.8 mA h), excellent cycle stability (about 76.9% capacity retention for 500 cycles) and a superior rate ability. Our research hopes to provide a new idea for improving the bonding strength of the surface coating.     

Tailoring the dielectric properties and energy storage density of 1−x(0.94NaNbO3−0.06SZ)−xBi2O3 through substitution strategy

Energy storage using dielectric capacitors is a growing area of research and development. However, designing a highly performing dielectric capacitor is still a challenge. Despite the excellent results achieved in lead-based dielectrics, lead-free substitutes are essential because of the environmental concerns associated with lead-based products. The lead-free 1?x (0.94NaNbO₃? 0.06SrZrO₃)+ x Bi₂O₃ ceramics abbreviated NNSZ + xB for x = 0.0, 0.05, 0.1, 0.15, and 0.20 was fabricated via solid-state reaction. A recoverable energy density of 2.93 J cm?³ was obtained for NNSZ+0.1B, associated with high thermal stability (25–130 °C), excellent cycling (N = 10⁵), and high efficiency (η) of 83.5%. Moreover, the introduction of Bi₂O₃ significantly improved the electrical insulation (?_r at 1 kHz = 1608 and tan δ = 0.0038) and breakdown strength (380 kVcm?¹) of NNSZ+0.1B by minimizing the formation of sodium, bismuth, and oxygen vacancies. The results obtained in this study provide a benchmark for further investigations on NaNbO₃-based ceramics. More importantly, this study suggests that NNSZ + xB ceramics can be used in pulsed power technology.     

Surface modification of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane in supercritical carbon dioxide for enhancing interfacial strength

PBO fiber is one of the most promising reinforcements in resin matrix composite because of its excellent mechanical properties. However, the inert and smooth surfaces make it the poor interface adhesion with resin matrix, which seriously limits the application in composites. In this article, we report a method to modify the surface of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane（BisAPAF）in supercritical CO₂ to enhance interfacial properties. Chemical structures, surface elemental composition and functional groups, and surface morphology were characterized by FT-IR spectrometer, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), respectively. The mechanical properties of the samples were tested by a tensile tester. Static contact angle and microdebonding tests were used to characterize the wetting ability and interfacial shear strength (IFSS) of the fiber and epoxy resin. The results showed that the BisAPAF could be solved in scCO₂ and introduced more groups, –NH₂, –OH, and –CF₃ on the fiber surface, resulting in the mechanical properties and the wettability of PBO fiber slightly improved. Moreover, the fiber surface roughness was also increased obviously. The IFSS between the modified PBO fiber and epoxy resin increased from 8.18 MPa to 31.4 MPa when the treating pressure was 14 MPa. In general, the method to modify PBO fibers surface using BisAPAF in scCO₂ can effectively improve their interfacial properties.     

Binding Characteristics Study of DNA based Aptamers for E. coli O157:H7

E. coli O157:H7 is a pathogenic bacterium producing verotoxins that could lead to serious complications such as hemolytic uremia syndrome. Fast detection of such pathogens is important. For rapid detection, aptamers are quickly gaining traction as alternative biorecognition molecules besides conventional antibodies. Several DNA aptamers have been selected for E. coli O157:H7. Nonetheless, there has not been a comparative study of the binding characteristics of these aptamers. In this work, we present a comprehensive analysis of binding characteristics including binding affinity (K_d) and binding capacity (B_max) of DNA-based aptamers for E. coli O157:H7 using qPCR. Our results show that aptamer E18R has the highest binding capacity to E. coli 157:H7 and the highest specificity over non-pathogenic E. coli strains K12 and DH5α. Our study also finds that the common biotin-tag modification at 5′ end typically changes the binding capacity significantly. For most of the selected aptamers, the binding capacity after a biotin-tag modification decreases. There exists a discrepancy in the binding capability between the selected aptamer and the aptamer used for detection. Our study also shows that a lower concentration of Mg²⁺ ions in the binding buffer leads to a decrease in the binding capacity of E17F and E18R, while it does not affect the binding capacity of S1 and EcoR1.     

Enhanced Physical and Mechanical Properties of Nitrile-Butadiene Rubber Composites with N-Cetylpyridinium Bromide-Carbon Black

The physical and mechanical properties of nitrile–butadiene rubber (NBR) composites with N-cetylpyridinium bromide-carbon black (CPB-CB) were investigated. Addition of 5 parts per hundred rubber (phr) of CPB-CB into NBR improved the tensile strength by 124%, vulcanization rate by 41%, shore hardness by 15%, and decreased the volumetric wear by 7% compared to those of the base rubber-CB composite.     

Surface arcing of insulators due to bentonite contamination

Impulse, alternating and direct voltage tests together with optical observations have been done under clean and polluted surface conditions with respect to bentonite, which is treated as a pollutant. The insulator materials tested were polymethyl methacrylate and polythene. Bentonite pollution may affect several surface flashover characteristics such as voltage at breakdown and 50% breakdown voltage under negative lightning impulse (1.2/50 μs) and the time to breakdown under wet condition for both negative and positive impulse voltage. There are four types of paths taken by the discharge channels, based on which the degree of degradation of the material surface may vary.     

微秒脉冲下极性效应对碳酸丙烯酯击穿场强的影响

通过对比碳酸丙烯酯在针板电极间距分别为0.5、1.0和2.0 mm下的击穿电压大小的实验,研究碳酸丙烯酯的极性效应.实验设备包含一个充电时间在5～20毫秒的电容储能型脉冲型脉冲功率源和一个内置针板电极的击穿试件. 每一组的击穿电压通过示波器显示记录. 三组不同间距下的击穿实验数据表明碳酸丙烯酯的正电极击穿场强高于负电极击穿场强,并且击穿场强随着电极间距的增大而增 大. 对碳酸丙烯酯针板电极的击穿进行了仿真模拟实验. 基于实验结果对碳酸丙烯酯的极性效应给出了相应的解释.