Surface Changes at Platinized Platinum Based Hydrogen Gas Electrodes Following Use in Highly Saline Aqueous Solutions

Platinized platinum based hydrogen gas electrodes, Pt(Pt)|H₂(g)|H⁺(aq), and silver‐silver chloride electrodes, Ag|AgCl|Cl^? (aq), make up the Harned cell, without transfer, working in the potentiometric mode at Cl^? concentrations and ionic strengths, I, below 0.1 mol kg^?1, for assigning primary pH values to reference pH buffer solutions. This work reports on experiments performed at higher I and Cl^? solutions up to 0.7 mol kg^?1, aiming at addressing seawater conditions with results of equally high quality. In the course of measurements, the occasional occurrence of highly unstable potentials denoted electrode malfunction; Pt metal surfaces observed by SEM/EDS and XRD exhibit strong Ag and Cl peaks corresponding to the presence of AgCl crystals deposited at both surfaces.     

氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯(PANI-GO),得到了氮掺杂的还原氧化石墨烯碳材料(N-RGO),以其负载Pt制备了Pt/N-RGO纳米结构电催化剂.采用透射电镜(TEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能.结果表明:高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

采用CO吸附原位红外光谱研究Pt/TiO_2光催化体系中助催化剂作用

采用CO作为探针分子,将原位透射红外光谱应用于研究助催化剂Pt在Pt/TiO2光催化体系中的作用.实验发现,光照条件下,CO的覆盖度及样品温度没有明显变化,CO在Pt/TiO2上的吸附峰红移11 cm–1,在Pt/Al2O3上的吸附峰没有位移,表明CO在Pt/TiO2上的红移来源于TiO2上的光生电子转移到Pt上,这解释了为什么加入Pt助催化剂可提高光催化产氢活性.     

Theoretical Studies on Dihedral Angle-Bending Isomers of M2Pt20/-Clusters

The structures and electronic properties of the gaseous M\begin{document}$ _2 $\end{document}Pt\begin{document}$ _2 $\end{document}\begin{document}$ ^{0/-} $\end{document} clusters (M represents the alkaline earth metal) were investigated using the density functional theory (B3LYP and PBE0) and wave function theory (SCS-MP2, CCSD and CCSD (T)). The results indicate that the D\begin{document}$ _{2{h}} $\end{document} isomers with the planar structures are more stable than the C\begin{document}$ _{2v} $\end{document} isomers with smaller dihedral angles and shorter Pt-Pt bond lengths. The mutual competition of M(s, p)-Pt(5d) interaction and Pt-Pt covalent bonding contributes to the different stabilizations of the two kinds of isomers. The M(s, p)-Pt(5d) interaction favors the planar isomers with D\begin{document}$ _{2h} $\end{document} symmetry, while the Pt-Pt covalent bonding leads to the C\begin{document}$ _{2v} $\end{document} isomers with bending structures. Two different crossing points are determined in the potential energy curves of Be\begin{document}$ _2 $\end{document}Pt\begin{document}$ _2 $\end{document} with the singlet and triplet states. But there is just one crossing point in potential energy curves of Ra\begin{document}$ _2 $\end{document}Pt\begin{document}$ _2 $\end{document} and Ca\begin{document}$ _2 $\end{document}Pt\begin{document}$ _2 $\end{document}\begin{document}$ ^- $\end{document} because of flatter potential energy curves of Ra\begin{document}$ _2 $\end{document}Pt\begin{document}$ _2 $\end{document} with the triplet state or Ca\begin{document}$ _2 $\end{document}Pt\begin{document}$ _2 $\end{document}\begin{document}$ ^- $\end{document} with quartet state. The results reveal a unique example of dihedral angle-bending isomers with the smallest number of atoms and may help the understanding of the bonding properties of other potential angle-bending isomers.     

流动注射不可逆双安培法测定对乙酰氨基酚

对乙酰氨基酚(ACOP,扑热息痛)是一种常见的解热镇痛药,其含量测定对于研究药物的药理作用、临床疗效、合理用药、开发资源、质量控制等具有重要意义。目前的测定方法主要是国家药品标准中的紫外分光光度法[1]以及重氮化法[2],高效液相色谱法(HPLC)[3],气相色谱法(GC)[4],毛细管     

Assessment of the beneficial combination of electrochemical and ultrasonic activation of compounds originating from biomass

The electro-oxidation of organic molecules at the anode with simultaneous generation of hydrogen at the cathode in electrosynthesis reactors is considered as a promising and efficient process for the co-production of hydrogen and bio-sourced value-added chemicals. In this study and for the first time, we investigated the electro-oxidation of glucose and methylglucoside in 0.1 mol L⁻¹ NaOH on polycrystalline Pt (real surface area = 14.5 ± 0.5 cm², roughness ≈ 5) in the potential range [0; +1.20 V vs. rhe] under silent and ultrasonic (bath, 45 kHz, P_acous = 11.20 W) conditions. A series of linear sweep voltammograms, chronoamperograms and high-performance liquid chronoamperograms were generated. It was found that higher current densities were obtained under ultrasonic conditions over the potential range of +0.25 V to +1.10 V vs. rhe, indicating that higher oxidation rates were provided under ultrasonication. It was observed that the desorption of species from the Pt surface in the medium potential region was favoured, allowing free catalytic Pt sites for further adsorption and oxidation of reactants; and in the high potential region, high peak current densities in the presence of ultrasound was due to enhanced mass transport of the electroactive species from the bulk electrolyte to the Pt-polycrystalline electrode surface. HPLC studies confirmed that higher electrochemical activity was obtained in the presence of ultrasound than in the absence. In our conditions, it was also found that low frequency ultrasound did not change the selectivity of the glucose and methylglucoside electro-oxidation reactions but instead, a significant increase in the rate of conversion was observed.     

PtNiSnO_2/C的制备、表征及其电催化氧化乙醇活性

采用改进的B?nnemann法成功制备了Pt/C、Pt-Ni_(1/3)/C、Pt-SnO_2/C、Pt-Ni_x-SnO_2/C(x=1/4,1/3,2/3,1)阳极电催化剂。利用X射线衍射(XRD)、高分辨透射电子显微镜(HR-TEM)以及X射线光电子能谱(XPS)对催化剂晶型结构、表面形貌和表面电子结构进行了表征。运用线性扫描伏安(LSV)和电流密度-时间(j-t)曲线进行电化学测试,研究了乙醇电催化氧化(EOR)活性。并用原位红外光谱(in situ FT-IR)研究了EOR过程中产物的分布。结果表明,Pt-Ni_(1/3)-SnO_2/C是由Pt-Ni合金和SnO_2两相组成。XPS结果表明,在Pt-SnO_2中添加微量的Ni,Pt表面电子结构发生了改变。电化学结果表明,三元催化剂的EOR活性均优于二元和纯Pt,其中Pt-Ni_(1/3)-SnO_2/C的EOR活性最佳。Ni和SnO_2的加入并没有显著提高乙醇C―C键的断裂能力,但是二者的协同作用在低电位(0.1 V)下加强了乙醛的进一步氧化,生成了乙酸。     

红色磷光喹喔啉铂(II)配合物及其有机电致发光器件的制备

利用2,3-二苯基喹喔啉和氯亚铂酸钾(K2PtCl4)反应,合成了一种新型喹喔啉铂的配合物(DPQ)Pt(acac),通过元素分析,1HNMR测定对配合物结构进行了表征,结果显示得到的是目标化合物.利用紫外光谱和荧光光谱对配合物进行了研究.利用该材料作为磷光染料制备了结构为ITO/NPB(21nm)/NPB∶7%(DPQ)Pt(acac)(17.5nm)/BCP(7nm)/Alq3(21nm)/Mg∶Ag(10∶1)(120nm)/Ag(10nm)的有机电致发光器件(OLED).结果表明,该配合物在442和485nm处存在单重态1MLCT(金属到配体的电荷跃迁)和三重态3MLCT的吸收峰;在632nm处有较强的金属配合物三重态的磷光发射;该器件的启动电压是5.0V,器件的最大亮度为1516cd·m-2,外量子效率为0.66%,流明效率为0.26lm·W-1,是一种红色磷光材料.     

Nickel foam-based composite electrodes for electrooxidation of methanol

Nickel foam and five nickel foam-based composite electrodes were prepared for being used as anode materials for the electrooxidation of methanol in KOH solution containing 0.1 and 1.0 M of methanol. The layered electrodes composed of nickel foam, platinum nanoparticles, polyaniline (PANI) and/or porous carbon (C) prepared in various assemblies. As shown by SEM analysis, depending on the preparation conditions, the electrodes of different morphologies were obtained. Using the cyclic voltammetry method, the oxidation of methanol on nickel foam electrode was observed in the potential range 0.4 V ↔ 0.7 V, where the Ni(OH)₂/NiOOH transformation occurred. The presence of Pt particles in electrode gave rise to the increase in electrocatalytic activity in this potential range. For electrodes containing dispersed platinum catalyst (Ni/Pt, Ni/PANI/Pt and Ni/C/Pt), the oxidation of methanol was noted also in the potential range −0.5 V ↔ 0.1 V. The electrocatalytic activities of the examined electrodes toward methanol oxidation at low potentials were in order Ni/Pt > Ni/C/Pt > Ni/PANI/Pt, whereas at high potentials in order Ni/PANI/Pt > Ni/Pt> Ni/C/Pt > Ni. Among the examined electrodes, the most resistant to cyclic poisoning appeared to be the Ni/C/Pt electrode. Presented at the 4Th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

铂/L分子筛重整催化剂烷烃芳构化反应机理

铂/L分子筛新型重整催化剂具有碱性、单功能与独特的孔结构。与双功能催化剂对比,它对n-C_6～n-C_8直链烷烃有极高的芳构化活性和选择性,其芳构化机理可能与双功能催化剂不同。本文应用正己烷(n-C_8)、正庚烷(n-C_7)、正辛烷(n-C_8),2-甲基己烷(2MHx)、甲基环戊烷(MCP)等探针分子,在脉冲微反装置上考察了它们在Pt/BaL催化剂上的芳构化性能和产物分布。提出烷烃分子(≥C_6)主链的1,6位碳原子经与