Voltammetric Detector for Liquid Chromatography: Determination of Triclosan in Rabbit Urine and Serum

A flow-electrolytic cell containing a strand of carbon fibers has been designed and characterized for use in a voltammetric detector for high-performance liquid chromatography. The detector was used for determination of triclosan (2,4,4-trichloro-2-hydroxydiphenyl ether) in rabbit serum and urine. Analysis of rabbit serum and urine 1 day and 1 to 5 days, respectively, after ingestion of oral triclosan revealed that the concentration of triclosan was higher than for control serum and urine. The concentration reached maximum levels after 6 h and 34 h or 44 h in serum and urine, respectively. When triclosan was determined in rabbit samples with the method proposed the results obtained were comparable with those obtained by high-performance liquid chromatography with ultraviolet detection.     

量子点PbS修饰纳米结构TiO2复合膜的光电化学研究

用光电流作用谱、光电流-电势图等光电化学方法研究了ITO(铟锡氧化物导电玻璃)/TiO₂ /Q-PbS(量子点PbS)膜电极的光电转换性质。结果表明，由于量子尺寸的效应，在膜电极制备中，随着ITO/TiO₂电极在饱和Pb(CH₃COO)₂溶液中浸泡时间的不同，所制备的Q-PbS颗粒大小不同，禁带宽度随着浸泡时间的增大而减小，浸泡时间为40 s、在80 ℃烘干下制备的Q-PbS的禁带宽度为1.68 eV，其价带位置为-5.072 eV。Q-PbS修饰ITO/TiO₂电极可使光电流发生明显的红移，从而提高宽禁带半导体的光电转换效率。     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

电化学合成聚苯胺粉末电极的电化学行为研究

我们曾用慢速动电位扫描法研究化学合成聚苯胺粉末的电化学行为.本文对恒电位电解合成聚苯胺粉末进行了研究.用这种方法制备的粉末由于合成溶液中不含氧化剂因而纯度高.本文还报导了这种聚苯胺粉末电极的交流阻抗测量结果.交流阻抗法曾用于聚苯胺膜的电导和化学合成聚吡咯的电阻测定. 所用盐酸、氟硼酸、硅氟酸、苯胺均为分析纯;苯胺经常压蒸馏提纯;硫酸为超纯;磷酸为分析纯;高氯酸为优级纯.溶液皆用两次蒸馏水配制.     

铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.     

Mass transport in gas channels of electrochemical cells with a solid-oxide electrolyte: Allowing for the electrode reaction rates in numerical calculations

The concentration fields, Nusselt number distributions along the electrode, and ratios of concentrations of electrochemically active components at the entrance into and exit out of an electrochemical cell are determined by numerical integration of the convective-diffusion equation for a broad range of rate constants of electrode reactions, Peclet numbers, and geometrical parameters of channels. Three regions of parameter values are revealed. At low reaction rates (K _l < 0.5), mass transfer is completely determined by electrode kinetics; at high rates (K _l > 20), it is completely determined by the diffusion in the gas phase; and in the intermediate region of values of K _l it is necessary to allow for both the diffusion processes and the electrode reactions.Translated from Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 317–324.Original Russian Text Copyright © 2005 by Ezin, Somov.     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

一种新的磷酸根离子敏感电极研究

一种新的磷酸根离子敏感电极研究肖丹，俞汝勤，李军，袁孔铨（湖南大学化学化工系，长沙，４１００８２）关键词磷酸根，离子选择电极，磷酸二氢根磷酸根离子浓度的测定在化学化工、环境保护、生命科学和临床医学等领域有着重要的意义。对磷酸根离子敏感电极的研究和探索...     

Voltammetric Characterization of Micro‐ and Submicrometer‐Electrode Arrays of Conical Shape for Electroanalytical Use

Densely packed micro‐ and submicrometer electrode arrays of platinum and gold (the nominal number, N, of electrodes in each array varies between 225 and 3600) are fabricated by photolithographic technique and vapor deposition processes of metal films. The electrodes are conical‐shaped and only their apexes are exposed to the electrolytic solution. The electrode arrays are characterized electrochemically in Ru(NH₃)₆Cl₃ aqueous solutions by using cyclic voltammetry at low scan rates, to establish the number of electrochemically active electrodes (N_ac) in each array; the geometric characterization is performed by scanning electron microscopy. All the investigated arrays provide steady‐state voltammograms, indicating diffusionally independent behavior of each microelectrode. The number of microelectrodes that are active in the fabricated arrays depends on microelectrode density. In particular, for the arrays with N=3600 and N=225, the fraction of active sites is about 45% and 90%, respectively. The analytical performance of some of the Pt version of the arrays is tested in hydrogen peroxide solutions, allowing verifying that linear calibration plots over the concentration range (0.1–20 mM) are obtained. This dynamic range is larger than that typically recorded at smooth polycrystalline platinum electrodes (0.5–5 mM), and the better performance is attributed to both the higher aspect ratio of the cone geometry and the higher mass transport associated to each microelectrode of the array. Reproducibility (within 3.5%, r.s.d.) and long‐term stability (within 5%, r.s.d., after 8 h continuous use) of the electrode systems are satisfactory. A low detection limit, based on the signal to noise ratio equal to 3, of 0.05 mM is found, which is adequate for a rapid monitoring of H₂O₂ in real samples and industrial processes.