Methane polymerization with a hollow cathode: Influence of the cathode metal

Methane, mixed with argon, has been polymerized by means of a hollow-cathode discharge system. Two types of cathodes were studied; one was made of a solid solution of 81% tungsten and 19% platinum, while the other was of pure tungsten. Under identical operating conditions, a higher polymer yield was found in the case of the platinum cathode (90% against 70% for tungsten). The work function of the solid solution was estimated to be 6.3 eV, compared with 4.4 eV for tungsten. In terms of the data available, the thermionic current, which is the main source of energetic electrons, is about one order of magnitude lower for the solid solution cathode when compared with the tungsten cathode thermionic current. However, the polymer yield observed is higher in the former case. The concentration of the CH species in the hollow cathode was found to differ greatly for the cathodes tested and was about 5 times higher in the case of tungsten-platinum cathodes. Since no excited platinum vapor could be detected in the gas phase, the increase in CH concentration was attributed to a catalytic effect of the cathode inside surface. An evaluation of the plasma polymer deposition rate yields 70 nm·s^–1 for the platinum-tungsten type hollow cathode and 42 nm·s^–1 for the tungsten one. In both cases, the deposition rate is much higher than those obtained from the most widely used methods for plasma polymer deposition (0.10–1.0 nm·s^–1) implying methane-argon mixtures, and is comparable to the results obtained with a new type of plasma polymer deposition reactor described in the literature.     

Self-assembled metallocycles with two interactive binding domains

Five metallocycles 1 a-e have been self-assembled from S-shaped bispyridyl ligands 2 a-e and a palladium complex, [Pd(dppp)(OTf)(2)] (dppp=1,3-bis(diphenylphosphanyl)propane), and have been characterized by elemental analysis and various spectroscopic methods including (1)H NMR spectroscopy and electrospray ionization (ESI) mass spectrometry. These metallocycles all are monocyclic compounds, but can fold to generate two binding domains bearing hydrogen-bonding sites based on pyridine-2,6-dicarboxamide units. The binding properties of the metallocycles with N,N,N',N'-tetramethylterephthalamide (G) have been probed by means of ESI mass spectrometry and (1)H NMR spectroscopy. The results both in the gas phase and in solution are consistent with the fact that the metallocycles accommodate two molecules of the guest G. Thus, the ESI mass spectra clearly show fragments corresponding to the 1:2 complexes in all cases. (1)H NMR studies on 1 a and G support the formation of a 1:2 complex in solution; the titration curves are nicely fitted to a 1:2 binding isotherm, but not to a 1:1 binding isotherm. In addition, a Job plot also suggests a 1:2 binding mode between 1 a and G, showing maximum complexation at approximately 0.33 mol fraction of the metallocycle 1 a in CDCl(3). The binding constants K(1) and K(2) are calculated to be 1600 and 1400 M(-1) (+/-10 %), respectively, at 25 degrees C in CDCl(3), indicative of positively cooperative binding. This positive cooperativity was confirmed by the Hill equation, affording a Hill coefficient of n = 1.6. Owing to insufficient solubility in CDCl(3), for comparison purposes the binding properties of the metallocycles 1 b-e were investigated in a more polar medium, 3 % CD(3)CN/CDCl(3). (1)H NMR titrations revealed that the metallocycles all bind two molecules of the guest G with Hill coefficients ranging from 1.4 to 1.8. This positive cooperativity may be attributed to a structural reorganization of the second binding cavity when the first guest binds to either one of the subcavities present in the metallocycles.     

Evaluation of soybean seed protein extraction focusing on metalloprotein analysis

Two methods of protein extraction for soybean seeds were evaluated in terms of preservation of the metal ions bound to proteins after the extraction and separation procedures. The proteins were firstly separated according to their molar masses by polyacrylamide gel electrophoresis. Then, the protein bands were mapped by synchrotron radiation X-ray fluorescence in order to establish which metal ions were present in each one. Finally, some mapped protein bands were decomposed by microwave-assisted combustion and Ca, Cu, K, Mg, Mn, and Zn were quantified by inductively coupled plasma mass spectrometry or inductively coupled plasma optical emission spectrometry. The extraction methods studied were Method A (based on the treatment of ground soybean seeds with hexane and their extraction with Tris–HCl and β-mercaptoethanol) and Method B (based on the treatment of ground soybean seeds with petroleum ether and their extraction with Tris–HCl, dithiothreitol, phenylmethanesulfonyl fluoride, sodium dodecyl sulfate and potassium chloride). The best method was Method B, in which a 78% higher extraction efficiency was obtained when compared to Method A. Additionally, the metal-protein interactions were more appropriately preserved when Method B was applied, where the most affected ions were those that are bound weakly to proteins, such as Ca, K, and Mg.     

Protein dynamics tightly connected to the dynamics of surrounding and internal water molecules.

Proteins are key components of biological cells. For example, enzymes catalyze biochemical reactions, membrane transporters are responsible for uptake and release of critical and superfluous components from the cell environment, and structural proteins are responsible for the stability of the cell wall and cytoskeleton. Many of the diverse protein functions involve dynamic transitions ranging from small local atomic displacements up to large allosteric conformational changes. In any conformation, proteins are in contact with the universal solvent medium of cells, water. Water not only surrounds proteins but is often an integral part of proteins and also is involved in key mechanistic steps. This Minireview discusses recent experimental and theoretical results on the role of water for protein dynamics and function.     

Synthesis of 2′-O-[2-[(N,N-dialkylamino)oxy]ethyl]-modified oligonucleotides: hybridization affinity, resistance to nuclease, and protein binding characteristics

Synthesis of a series of 2′-O-[2-[(N,N-dialkylamino)oxy]ethyl]-modified 5-methyluridine nucleoside phosphoramidites and solid supports are described. Using these monomers, modified oligonucleotides containing phosphodiester linkages were synthesized in high yields. These modified oligonucleotides showed enhanced binding affinity to the complementary RNA (and not to DNA) and excellent nuclease stability with t_1/2>24 h. The human serum albumin binding properties of modified oligonucleotides have been evaluated to assess their transport and toxicity properties.     

Simultaneous quantitative measurement of a new platelet activating factor antagonist (BN 50730) and its two main metabolites in human plasma and urine by LC-MS

Summary A simple and sensitive assay has been developed for the quantitative measurement of a new platelet activating factor antagonist (BN50730), and its two main metabolites (BN50727 and BN50922), at the picomole level in human plasma and urine. The three compounds of interest and the internal standard (BN50765) were measured by combined LC-negative chemical ionization MS. A simple solid-liquid extraction procedure was used to isolate the parent drug and the two metabolites. The MS was tuned to monitor the intense ionm/z 333 generated in the ion source by a dissociative capture process. The assay was on 1 ml plasma or 0.1 ml urine and the quantitation limit was calculated as 1 ng·ml^–1. The very low relative standard deviations and mean percentages of error calculated for within-day or between-day repeatability assays demonstrate the ruggedness of the technique for routine determination in biological fluids. Some preliminary results on the pharmacokinetics of the parent drug and its two main metabolites illustrate the applicability of this method.     

Sorption of alkyl acetates from aqueous solutions by corn starch cryotextures

Capillary gas chromatography was used to study noncovalent sorption ofn-butyl,n-hexyl, andn-octyl acetates from aqueous solutions by corn starch cryotextures. In the concentration range of 0.5–15.0 mmol L⁻¹, about 38%n-butyl acetate, 70%n-hexyl acetate, and 98%n-octyl acetate are extracted from aqueous solutions. The sorption of the alkyl acetates depends on the alkyl chain length, indicating the hydrophobic character of their interaction with the corn starch cryotexture. No competitive sorption between acetates in the mixture was observed. Binding of alkyl acetates occurs during the cryosponge formation, due probably to the templation at the stage of starch sol, fixation in the cryosponge, and sorption on the surface of its walls. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1943–1945, October, 1998.     

Selective permeation of CO2 through poly 2-(N,N-dimethyl)aminoethyl methacrylate membrane prepared by plasma-graft polymerization technique

A membrane having an amine moiety was prepared by plasma-grafting 2-(N,N-dimethyl)aminoethyl methacrylate (DAMA) onto a microporous polyethylene substrate. Permselectivity of the membrane for CO₂ over N₂ was achieved in both dry and water swollen conditions. When the CO₂ partial pressure in the feed gas was 0.047 atm, the selectivity of CO₂ over N₂ reached 130 for the highly swollen water containing membrane. This value was found to agree with that obtained with a mobile carrier membrane (supported liquid membrane) using DAMA as the carrier. The effects of several experimental conditions such as degree of grafting, feed partial pressure and temperature on the membrane performance were studied. It was suggested that the membrane acted as a fixed carrier membrane for CO₂ facilitated transport in under the dry condition and acted as a fixed reaction site membrane in the water swollen condition. The carrier transport mechanism is discussed for dry and aqueous membranes.     

蛋白芯片法同时检测食品中克伦特罗与莱克多巴胺的残留量

建立了食品中克伦特罗和莱克多巴胺残留含量同时检测的微阵列蛋白芯片法。结果显示:克伦特罗的线性范围为0.07～1.2 ng/g;莱克多巴胺的线性范围为0.05～0.8 ng/g。猪肉、猪肝中上述两种物质的加标回收率为74%～132%,相对标准偏差均小于10%。将所建立的方法与HPLC-MS方法进行对比,两者检测结果一致。该方法简单、快速、通量高,可用于实际样品中克伦特罗和莱克多巴胺残留量的检测。