HL-2M 装置运行控制技术初步研究

重点介绍了 HL-2M 装置的运行技术和初步的等离子体控制实验结果,包括等离子体放电方案设计、 线圈电流控制、击穿阶段零场匹配和等离子体电流以及位移的控制。为了降低放电运行风险,HL-2M 装置初始放 电采用了简化的放电方案,通过整定 PID 参数实现了线圈电流控制,在击穿阶段获得了 10V 以上的环电压和较大 范围的零场区域,成功实现等离子体击穿。最后,投入了等离子体电流和水平位移反馈控制算法,成功将等离子 体放电脉宽提升至 200ms 以上,且维持 I_p≥100kA 的时间超过了 100ms,上述结果表明 HL-2M 装置运行控制技术 得到了初步的检验。      

EAST����������ע��ij���ʵ���о�

对EAST中性束反向注入过程中等离子体加热和电流驱动进行了实验研究,并采用了美国普林斯顿大学等离子体物理实验室开发的TRANSP程序对高功率中性束注入过程中能量热输运进行了分析.结果表明,中性束注入可有效提高本底等离子体温度,产生束驱动非感应电流,提高等离子体旋转以及有效改善等离子体约束.     

液体中光击穿所激发声场的理论研究

以液体中光击穿所激发声场为研究对象,在等离子体椭球模型的基础上,为方便理论计算,简化等离子体椭球模型,提出了等离子体椭圆盘模型,对光击穿所激发声场进行了理论研究.得到了等离子体椭圆盘辐射声场的声压规律,并利用椭圆坐标变换,依据马修函数特性和模态的正交性,求得了等离子体椭圆盘振动位移的解析表达式.     

极紫外平场光栅光谱仪的研制和性能测试

研制了一台高分辨率极紫外光谱仪,用于磁约束等离子体诊断。采用一块具有平场特性的全息球面变线距光栅作为分光元件,光栅公称线密度为1 200 lines·mm-1,掠入射角为3°。一台可深度制冷、背照式面阵CCD作为光谱探测器,用机械快门控制曝光时间。通过CCD在光谱聚焦面的移动,可以记录的光谱范围为5～50 nm。用Penning放电光源测试了光谱仪的性能; 利用光源的标准谱线,进行了波长标定,波长精度为0.003 nm,并计算出系统各参数的实际值;当入缝宽度设置为30 μm时,在20 nm附近,光谱分辨率达0.015 nm,达到设计指标。     

一种新化合物K2Ti8O15纳米线

钛酸钾晶须通常是直径和长度在微米量级的无机晶须 ,可用Ｋ2 Ｏ·ｎＴｉＯ2 表示其组成 ,ｎ =1,2 ,4 ,6 ,8,[1] .六钛酸钾晶须具有耐高温、耐腐蚀、纤维拉伸强度高、导热系数小、红外反射率高 ,硬度低的特点 .在民用及工业方面有很多应用 .如催化剂载体、离子吸附交换材料、高温过滤器、绝热材料、耐摩擦材料等[2～ 5] .钛酸钾纳米线的合成尚未见报道 .我们在用电弧产生的Ｎ2 等离子体热解焦油时 ,生成了一种直径 9～ 2 0ｎｍ长约几百纳米线 .Ｘ射线能谱定量分析表明这种纳米线化学组成为Ｋ2 Ｔｉ8Ｏ15,是一种新的非化学计量化合物 .试验装…     

Testing the reliability of non-LTE spectroscopic models for complex ions

Collisional-radiative atomic models are widely used to help diagnose experimental plasma conditions through fitting and interpreting measured spectra. Here we present the results of a code comparison in which a variety of models determined plasma temperatures and densities by finding the best fit to an experimental L-shell Kr spectrum from a well characterized, but not benchmarked, laser plasma. While variations in diagnostic strategies and qualities of fit were significant, the results generally confirmed the typically quoted uncertainties for such diagnostics of ±20% in electron temperature and factors of about two in density. The comparison also highlighted some model features important for spectroscopic diagnostics: fine structure was required to match line positions and relative intensities within each charge state and for density diagnostics based on emission from metastable states; an extensive configuration set was required to fit the wings of satellite features and to reliably diagnose the temperature through the inferred charge state distribution; and the inclusion of self-consistent opacity effects was an important factor in the quality of the fit.     

Control of a turbulent flow separated at mid-chord along an airfoil with DBD plasma actuators

The goal of the present experimental study is to investigate the ability of surface DBD plasma actuators to delay flow separation along the suction side of a NACA0015 airfoil. Three single surface DBD actuators that can operate separately are mounted on the suction side of the profile, at 18%, 27% and 37% of the chord length. The boundary layer is transitioned by a tripper to be sure that the flow control is not due to the laminar-to-turbulent transition. The angle of attack is equal to 11.5° and the free-stream velocity to U₀ = 40 m/s, resulting in a chord-based Reynolds number of Re_c = 1.33 × 10⁶. The flow is studied with a high-resolution PIV system. In such conditions, the baseline flow separation occurs at 50% of chord. Then, the different single DBD have been switched on separately, in order to investigate the actuator location effect. One highlights that the DBD located at x_c/c = 18% is more effective than the two others ones, with a separation delay up to 64% of chord. When the three DBDs operate simultaneously, the separation point moves progressively toward the trailing edge when the high voltage is increased, up to 76% of chord at 20 kV. Finally, the effect of the actuation frequency on the control authority has been investigated, by varying the value of the operating frequency and by burst-modulation. For frequencies equal to 50 Hz and 500 Hz (reduced frequency F⁺ = 0.31 and 3.1), the separation has been delayed at 76 and 80% of chord, respectively.     

EAST新型下偏滤器冷却结构 传热性能数值模拟

为实现EAST装置超400s长脉冲高约束模、10MW加热功率下的稳态运行，需对现有的下碳偏滤器进行升级改造，拟采用钨串结极水冷却系统，热通量控制在水冷钨铜第一壁材料允许的稳态的10MW·m^-2。在对下钨偏滤器的冷却结极传热性能进行数值模拟仿真研究的基础上，研究了多种以钨串单元为基础的冷却结极，提出了一种新型下钨偏滤器水冷结极设计，幵建立了满足传热要求的EAST装置新型下钨偏滤器单元结构模型。     

The stabilization of partially-premixed jet flames in the presence of high potential electric fields

Numerous research efforts have focused on flame stabilization and emissions. Based on initial experiments, specific mechanisms resulting from DC electric fields were chosen to be investigated, namely the chemical, thermal, and ionization mechanisms. Numerical simulations were performed on premixed propane-ozone-air flames to characterize ozone effects on flame speed resulting from the formation of ozone in high potential electric fields. These results were compared against partially premixed flame experiments to observe the dominant influences within leading edge stabilization within high potential electric fields. It was found that the electromagnetic or ionization influences, serve as the dominant effect on the combustion zone.