The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method

The purpose of this research is to investigate the influence of plasma flow on the composition of gaseous phase organic waste. The experimental method and simulation program “Chemical Workbench” were used for this research. The gas phase waste was neutralized using air plasma in the temperature range of 1200–1700 K. The reactor simulation results showed that the amount of atomic oxygen and nitrogen decreases by 0.5%, meanwhile the amount of carbon monoxide increases by 0.5 percent, as the plasma forming gas is air. The investigation of percentage concentration results showed that as the temperature reaches 1700 K, the H₂ decreases by 4%, CO increases by 7%, CH₄ decreases by 0.4%, CO increases by 0.5%, N₂ decreases by 5%. The experimental measurement results of percentage concentration correlates sufficiently with simulation results for listed gas.     

基于改进DPSO算法的并行测试任务优化调度研究

并行测试以减少测试时间和降低测试成本的强大优势,已成为当前自动测试系统发展的方向。针对并行自动测试过程中,测试任务调度复杂,难以优化的问题,以PSO算法为基础,通过对问题空间编码的重新定义,并运用交叉、变异算子给出了新的粒子位置的更新公式,提出了一种改进后的DPSO算法。依据并行测试完成时间极限定理,给出了并行测试任务调度的目标函数与约束条件。以某雷达电子装备并行测试系统中三块电路板并行测试为例,对改进的DPSO算法进行了仿真验证,得到了最优调度测试序列。结果表明：与遗传算法相比,改进后的DPSO算法迭代次数更少,寻优性能更好,适用于工程应用。     

Free vibration of non-uniform nanobeams using Rayleigh–Ritz method

In this article, boundary characteristic orthogonal polynomials have been implemented in the Rayleigh–Ritz method to investigate free vibration of non-uniform Euler–Bernoulli nanobeams based on nonlocal elasticity theory. Non-uniform cross section of nanobeams has been considered by taking linear as well as quadratic variations of Young's modulus and density along the space coordinate. Detailed analysis has been reported for all the possible cases of such variations. The objective of the present study is to analyze the effects of nonlocal parameter, boundary condition, length-to-diameter ratio and non-uniform parameter on the frequency parameters. It is found that clamped nanobeams are having highest frequency parameters than other types of boundary conditions for a particular set of parameters. It is also observed that frequency parameters decrease with increase in scaling effect parameter. First four deflection shapes of non-uniform nanobeams have also been incorporated. In this analysis, some of the new results in terms of boundary conditions have also been included.     

A new sol–gel processing routine without chelating agents for preparing highly transparent solutions and nanothin films: engineering the role of chemistry to design the process

The great sensitivity of titanium alkoxides to hydrolysis makes their sol–gel transformation very fast and thus difficult to control. A method was proposed to alleviate this drawback. Preparation of highly transparent solutions and nanothin films is another objective of the present research. Employing nanoemulsion method and optimizing the processing conditions, a clear solution of well-dispersed nanosized particles was obtained. With the proposed process BaTiO₃ precursor sols and nanothin films with enhanced optical transparency towards the visible were prepared. The optimal formulation of the sol consists of acetic acid, barium acetate, 2-propanol, TTIP and deionized water with 6:1:1:1:150 M ratios, respectively. It was found that the reduction of the temperature in the initial stage of mixing of precursors controls the size of the forming species and accordingly improves the stability and transparency of the sol. The results also showed that the applied modifications and optimizations significantly downsize the particles within the sol to the nanometric scale and accordingly result in a significant improvement in the optical response of the products.     

Influence of interlayer coupling and intra-layer Coulomb interaction on electronic transport in bilayer graphene

Calculations of renormalized perpendicular conductivity within Kubo formula employing single particle temperature dependent Green's function formalism for bilayer graphene has been attempted. On the basis of numerical analysis, perpendicular conductivity as a function of temperature, interlayer coupling, onsite Coulomb interaction and carrier concentration per site has been analyzed for both AA- and AB-stacked bilayer graphene. It is found that perpendicular conductivity increases with interlayer coupling and also with temperature at low temperatures while at higher temperatures, there is saturation in perpendicular conductivity. Influences of onsite Coulomb interaction and carrier concentration per site on perpendicular conductivity is just opposite to each other while onsite Coulomb energy suppresses the rate of increase of σ_⊥/σ_⊥0 with temperature, on the other hand increase in carrier density per site enhance this rate significantly. Finally, theoretically obtained results on temperature dependent perpendicular conductivity are viewed in terms of electronic transport data as well as recent theoretical works available in bilayer graphene.     

New optically active poly(amide–imide)s from N-trimellitylimido-l-amino acid and 1,2-bis[4-aminophenoxy]ethane in the main chain: Synthesis and characterization

Six new optically active poly(amide–imide)s (PAIs) with good inherent viscosities were synthesized from the direct polycondensation reaction of N-trimellitylimido-l-amino acids with 1,2-bis[4-aminophenoxy]ethane by direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride (CaCl₂)/pyridine (py). Diamine was synthesized by using a two-step reaction. At first 1,2-bis[4-nitrophenoxy]ethane was prepared from the reaction of two equimolars 4-nitrophenol and one equimolar 1,2-dibromo ethane and the dinitro compound was reduced by using Pd/C. Also N-trimellitylimido-l-amino acids were synthesized by the condensation reaction of trimellitic anhydride with two equimolars of various l-amino acids in acetic acid solution. The polymerization reactions produced a series of optically active PAIs with a high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation, solubility tests, thermogravimetric analysis (TGA), and a derivative of thermogravimetric (DTG) analysis.     

Physical boundaries within aggregates – differences between amorphous,para‐crystalline,and crystalline Structures

The structural properties of finely divided inorganic materials such as metal and metalloid oxides, silicates or carbonates of both synthetic and natural origin are compared by means of electron microscopy and tomography. The structure of the outer surfaces of various compact or compacted agglomerates may suggest some striking similarities between various amorphous silica on the one hand and crystalline titania and alumina on the other however the details of the interior fine structure are completely different. Inside of the crystalline aggregates of, for example, alumina and titania distinct grain boundaries between the inter‐grown primary crystallites exist. Also physical boundaries between different solid phases and crystalline/amorphous transitions in core/shell structures can occur. No physical grain or phase boundaries were found inside of synthetic amorphous silica or para‐crystalline carbon black thus, the aggregate is the constituent particle. Synthetic amorphous silica from different production technologies (fumed/pyrogenic, precipitated, aerogel, gel) may exhibit different macro‐morphology but distinct similarities of the amorphous silica networks. Computational studies on silica and titania underline the stability of constituent particles and aggregates as observed by means of TEM after dispersing the original materials by ultra‐sonication.     

Rolf Huisgen's Classic Studies of Cyclic Triene Diels–Alder Reactions Elaborated by Modern Computational Analysis

Rolf Huisgen explored the Diels–Alder reactions of 1,3,5-cycloheptatriene (CHT) and cyclooctatetraene (COT) with the dienophiles maleic anhydride and 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) to determine the kinetics and mechanisms of various electrocyclizations and Diels–Alder reactions. These reactions have been examined with density functional theory. Modern computational chemistry has provided information not previously available by experiment. Transition states for all the reactions have been identified, and their Gibbs energies are used to explain the experimental reactivities. Zwitterionic intermediates were not found in the [4+2] cycloadditions of both CHT or COT with PTAD and are thus not involved in these reactions. [2+2+2] cycloadditions, as an alternative path to the Diels–Alder products, are highly disfavored. Rapid double nitrogen inversion was found for the cycloaddition products with PTAD.     

Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li-S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal-based pre-catalysts (Co₄N) in working Li-S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single-crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all-phase polysulfide-involving reactions. Consequently, Co₄N enables stable operation of high-rate (10 C, 16.7 mA cm⁻²) and electrolyte-starved (4.7 μL mg_S⁻¹) Li-S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low-valence metal compounds.