Growth characteristics of spherical titanium oxide nanoparticles during the rapid gaseous detonation reaction

The nanosize grain growth characteristics of spherical single-crystal titanium oxide (TiO₂) during the rapid gaseous detonation reaction are discussed. Based on the experimental conditions and the Chapman–Jouguet theory, the Kruis model was introduced to simulate the growth characteristics of spherical TiO₂ nanoparticles obtained under high pressure, high temperature and by rapid reaction. The results show that the numerical analysis can satisfactorily predict the growth characteristics of spherical TiO₂ nanoparticles with diameters of 15–300 nm at different affecting factors, such as concentration of particles, reaction temperature and time, which are in agreement with the obtained experimental results. We found that the increase of the gas-phase reaction temperature, time, and particle concentration affects the growth tendency of spherical nanocrystal TiO₂, which provides effective theoretical support for the controllable synthesis of multi-scale nanoparticles.     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Metal‐ and solvent‐free,clickable synthesis and postpolymerization functionalization of poly(triazole)s

In this study, a series of linear poly(triazole)s (PTAs) were successfully synthesized by the metal‐ and solvent‐free, thermal click polymerization of diazide and dialkyne (A₂ + B₂) monomers. All click polymerizations proceeded smoothly at 80 °C in an open atmosphere without protection from oxygen and moisture. After being polymerized for 36 h, the crude polymer was further fractionated into three fractions using a multistep precipitation method. By selectively choosing precipitating agents, this process produced poly(triazole) fractions with low polydispersity index (<1.30). The resulting PTAs are soluble in common organic solvents and stable at a temperature up to 320 °C. Furthermore, the methyl benzoate moieties in the main chain can serve as useful building blocks for further postpolymerization functionalization, yielding 1,2,4‐triazole derivatives. This functionalization strategy offers potential for the development of novel triazole‐based materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Segmented block copolyesters using click chemistry

Copper(I) catalyzed azide‐alkyne 1,3‐Huisgen cycloaddition reaction afforded the synthesis of triazole‐containing polyesters and segmented block copolyesters at moderate temperatures. Triazole‐containing homopolyesters exhibited significantly increased (～40 °C) glass transition temperatures (T_g) relative to high temperature, melt synthesis of polyesters with analogous structures. Quantitative synthesis of azido‐terminated poly(propylene glycol) (PPG) allowed for the preparation of segmented polyesters, which exhibited increased solubility and mechanical ductility relative to triazole‐containing homopolyesters. Differential scanning calorimetry demonstrated a soft segment (SS) T_g near ?60 °C for the segmented polyesters, consistent with microphase separation. Tensile testing revealed Young's moduli ranging from 7 to 133 MPa as a function of hard segment (HS) content, and stress at break values approached 10 MPa for 50 wt % HS segmented click polyesters. Dynamic mechanical analysis demonstrated an increased rubbery plateau modulus with increased HS content, and the T_g's of both the SS and HS did not vary with composition, confirming microphase separation. Atomic force microscopy also indicated microphase separated and semicrystalline morphologies for the segmented click polyesters. This is the first report detailing the preparation of segmented copolyesters using click chemistry for the formation of ductile membranes with excellent thermomechanical response. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A novel polymerization approach via thiol‐yne addition

The ability of thiyl radicals to add to terminal unsaturations in an efficient way made them considered being one of the click reactions. Recently, thiol‐yne addition reactions have been used extensively for the synthesis of crosslinked networks and dendrimers and postpolymerization functionalization protocols. Herein, we report a novel step‐growth type reaction for highly functional linear polymers using a monoalkyne and dithiol compound. First, we investigated the model reaction between 1‐octyne and 1‐octanethiol as well as 1,4‐butanedithiol compounds, which were initiated via self‐, thermal‐, and UV‐initiation; the UV‐initiation was found to be the most efficient method and completed within 2‐h reaction time. The same conditions were applied for the polymerization of four different functional alkynes bearing different functional groups with two dithiol compounds. All polymerizations resulted in highly functional linear polymers with number averaged molecular weights ranging from 5 to 30 kDa, except for propargylic acid and its methyl ester, where only oligomers formed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

COUPLING EFFECTS OF VOID SHAPE AND VOID SIZE ON THE GROWTH OF AN ELLIPTIC VOID IN A FIBER-REINFORCED HYPER-ELASTIC THIN PLATE

The growth of a prolate or oblate elliptic micro-void in a fiber reinforced anisotropic incompressible hyper-elastic rectangular thin plate subjected to uniaxial extensions is studied within the framework of finite elasticity. Coupling effects of void shape and void size on the growth of the void are paid special attention to. The deformation function of the plate with an isolated elliptic void is given, which is expressed by two parameters to solve the differential equation. The solution is approximately obtained from the minimum potential energy principle. Deformation curves for the void with a wide range of void aspect ratios and the stress distributions on the surface of the void have been obtained by numerical computation. The growth behavior of the void and the characteristics of stress distributions on the surface of the void are captured. The combined effects of void size and void shape on the growth of the void in the thin plate are discussed. The maximum stresses for the void with different sizes and different void aspect ratios are compared.     

Facile Fabrication of Nanorod‐Assembled Fluorine‐Substituted Hydroxyapatite (FHA) Microspheres

Nanorod‐assembled FHA microspheres with different F contents were for the first time prepared through a facile one‐step hydrothermal method. The effect of the reaction time and pH value of reaction solutions on the FHA morphology was investigated to elucidate the self‐assembly process of FHA microspheres. The results showed pH values had significant effect on the morphology of the formed FHA crystals, which were self‐assembled into sphere‐like sturctures at high pH conditions and rod‐like structures at low pH values. The results suggested that formation of FHA crystals with varied morphology may be directly related to Ca²⁺ release kinetics from EDTA‐Ca‐Na₂ at different pH conditions. Furthermore, it was found that the chemical stability of FHA microspheres was dependent on the F content in the materials, and high F contents in FHA microspheres lead to improved chemical stability. These results suggest that the prepared self‐assembled FHA microspheres may be used for teeth substitution materials due to their unique hierarchical structures and controllable chemical stability.     

The Kirchhoff type Schrödinger problem with critical growth

In this paper, we study the Kirchhoff type problem with critical growth. By using the variational method, the existence and multiplicity of solutions are obtained.