Multivariate control charts based on net analyte signal (NAS) for characterization of the polymorphic composition of Piroxicam using near infrared spectroscopy

Near infrared spectroscopic and multivariate statistical control charts based on the net analyte signal (NAS) were applied to the polymorphic characterization of Piroxicam samples. Three different polymorphic forms (I, II and III) were studied, using X-ray powder diffraction (XRPD) and scanning electron microscopy as reference techniques. Samples containing form I were considered inside the quality specifications and forms II and III were impurities. Three control charts were developed: the NAS chart that corresponds to the analyte of interest (polymorphic form I), the interference chart that corresponds to the contribution of other compounds in the sample and the residual chart that corresponds to nonsystematic variation. From the limits estimated for each chart using samples inside the quality specifications, it was possible to identify samples that did not present polymorphic form I. The use of multivariate control charts provides a rapid evaluation of purity and the polymorphic composition of pharmaceutical formulations based on Piroxicam.     

Perturbations of the Dushman Reaction with Piroxicam: Experimental and Model Calculations

Perturbation of the Bray? Liebhafsky non‐oscillating subsystem (mixture of KIO₃ and H₂SO₄), i.e., Dushman reaction (DR), by piroxicam (PX), was observed in an open reactor, i.e., in the continuously fed well‐stirred tank reactor (CSTR). Monitoring the response of DR to perturbations by different concentrations of PX allows developing a simple procedure for quantitative determination of this analyte in both bulk drug and pharmaceutical preparation (injection). A tentative perturbation mechanism of PX action on the DR matrix, based on a kinetic scheme that was suggested by Agreda et al., is proposed. The PX reactivity in DR has been generally related to the reaction of PX with hypoiodous acid (HIO) present in the matrix.     

Recent advances on non-steroidal anti-inflammatory drugs, NSAIDs: Organotin complexes of NSAIDs

An overview is given of the results of organotin-NSAIDs interactions. Several organotin complexes with NSAIDs, derivatives of the carboxylic acid family and oxicam family, have been synthesized and characterized by spectroscopy and X-ray crystallography at the University of Ioannina. Results concerning the biological activity of these organotin complexes will be referred.     

Simultaneous Electrochemical Sensing of Ceftriaxone and Piroxicam Using Zeolite Modified Electrode for Medical Applications

The simultaneous sensing of Ceftriaxone (Cef) and Piroxicam (Pir) was presented in detail through the electrochemical method in which carbon paste electrode (CPE) was modified by meso-structured Zeolite for medical application. The results indicated a polycrystalline Zeolite phase with a relatively high surface contact for charge transportation in the sensing process. Electrochemical impedance spectroscopy (EIS) plots also showed better charge transportation parameters for the modified electrode. The effect of analytes concentration, in both individual and simultaneous states, on the electrochemical sensor quality parameters was investigated by different methods and the obtained results were thoroughly discussed.     

The potential of combining solid-phase optosensing and multicommutation principles for routine analyses of pharmaceuticals

In this work, we have explored the analytical potential of combining solid-phase optosensing and multicommutation principles, applied to the field of routine analyses of pharmaceuticals. This marriage benefits from the advantaging features of both concepts: the ability of multicommutation to provide increased repeatability, easier sample handling, reduced sample and reagent consumption as well as minor waste generation, combined with the enhancement of both sensitivity and selectivity obtained when a solid support is used to carry out the spectroscopic measurements directly on it. This approach has been evaluated by developing a method for the simultaneous analysis of two active principles (piroxicam and pyridoxine) in pharmaceutical formulations, using a non-polar sorbent as a solid support to attain the separation and subsequent preconcentration/detection of the targeted analytes. A multicommutated flow-through multisensor based on the direct intrinsic solid-phase UV absorbance measurements of the analytes on a packed C₁₈ silica gel bed was then thoroughly developed. The usefulness of this approach was assessed when it was applied to the determination of piroxicam and pyridoxine in different pharmaceutical formulations obtaining remarkable results.     

Highly Sensitive Electrochemical Sensor Based on Pt Doped NiO Nanoparticles/MWCNTs Nanocomposite Modified Electrode for Simultaneous Sensing of Piroxicam and Amlodipine

In this paper, a high‐sensitivity electrochemical sensor based on platinum (Pt) doped nickel oxide (NiO) nanoparticles and multi‐walled carbon nanotubes (MWCNTs) modified glassy carbon electrode (Pt?NiO/MWCNTs/GCE) has been developed to determine piroxicam (PIR) and amlodipine (AML) simultaneously. The electrochemical behavior of PIR and AML at the proposed sensor has been investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry (CA) methods. Pt doped NiO nanoparticles were synthesized by the sol‐gel procedure and were investigated using X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDX) and field emission scanning electron microscopy (FESEM) techniques. DPV responses of PIR and AML increased linearly with their concentration in wide linear dynamic ranges of 0.6–320.0 μM and 1.0–250.0 μM, respectively. The limits of detection were 0.061 μM for PIR and 0.092 μM for AML. The excellent analytical figure of merits of the proposed modified electrode leads to application of it promising electrochemical sensor to determine PIR and AML in human serum and urine with satisfactory results.     

METAL CHELATES OF NEW LIGANDS: 1,2-BENZOTHIAZINE-1,1-DIOXIDE DERIVATIVES

Abstract

The novel chelates ML₂ (M = Co, Ni, Cu, Zn) were obtained by the interaction of 3-benzoyl-4-hydroxy-1,2-benzothiazine-4(3H)-on-1,1-dioxide and 2-methyl-3-benzoyl-4-hydroxy-1,2-benzo-thiazine-4(3H)-on-1,1-dioxide with elemental metals (direct electrochemical synthesis) or their acetates (chemical synthesis) in methanol. The tetrahedral or polymeric-octahedral structures with a β-diketonate fragment are assigned based on IR and ¹H NMR spectra. The studied ligands and their complexes are model compounds of molecules used as anti-inflammatory drugs.     

A sequential injection method for the determination of piroxicam in pharmaceutical formulations using europium sensitized fluorescence

A simple, selective and sensitive luminescence method for the assay of piroxicam (PX) in pharmaceutical formulation is developed. The method is based on the luminescence sensitization of europium (Eu³⁺) by complexation with PX. The signal for PX–EU is monitored at λ_ex=358 nm and λ_em=615 nm. Optimum conditions for the formation of the complex in methanol were 0.01 M TRIS buffer and 0.2 mM of Eu³⁺ which allows the determination of 100–2000 ppb of pX in batch method and 100–1000 ppb with limit of detection (LOD) = 23.0 ppb using sequential injection analysis (SIA). The relative standard deviations of the method range between 2 and 3% indicating excellent reproducibility of the method. The proposed method was successfully applied for he assay of PX in pharmaceutical formulations (Feldene capsules and tablets). Average recoveries of 101.0±0.3 and 98.8±2.7% were obtained for capsules in methanol using batch and sequential injection (SI) methods, respectively.     

Structural and thermal characterization of ternary complexes of piroxicam and alanine with transition metals: uranyl binary and ternary complexes of piroxicam. Spectroscopic characterization and properties of metal complexes

Ternary Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and UO2(II) complexes with piroxicam (Pir) drug (H2L1) and dl-alanine (Ala) (HL2) and also the binary UO2(II) complex with Pir were studied. The structures of the complexes were elucidated using elemental, IR, molar conductance, magnetic moment, diffused reflectance and thermal analyses. The UO2(II) binary complex was isolated in 1:2 ratio with the formula [UO2(H2L)2](NO3)2. The ternary complexes were isolated in 1:1:1 (M:H2L1:L2) ratios. The solid complexes were isolated in the general formulae [M(H2L)(L2)(Cl)n(H2O)m].yH2O (M=Fe(III) (n=2, m=0, y=1), Co(II) (n=1, m=1, y=2) and Ni(II) (n=1, m=1, y=0)); [M(H2L)(L2)](X)z.yH2O (M=Cu(II) (X=AcO, z=1, y=0), Zn(II) (X=AcO, z=1, y=3) and UO2(II) (X=NO3, z=1, y=2)). Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl-O groups, while Ala behaves as a uninegatively bidentate ligand coordinated to the metal ions via the deprotonated carboxylate-O and amino-N. The magnetic and reflectance spectral data show that the complexes have octahedral geometry except Cu(II) and Zn(II) complexes have tetrahedral structures. The thermal decomposition of the complexes was discussed in relation to structure, and the thermodynamic parameters of the decomposition stages were evaluated.     

Selective transport of copper(II) ions across a liquid membrane mediated by Piroxicam

Piroxicam was found to be a highly selective carrier for uphill transport of Cu²⁺ ions through a chloroform liquid membrane. The transport occurs via a counterflow of protons from the receiving phase to the source phase. The effects of several parameters on the transport of Cu²⁺ ions, such as the carrier concentration, pH of the source phase, composition of the receiving phase, and duration are described. A high transport efficiency (98±2%) was provided by the carrier for Cu²⁺ ions in a receiving phase of 0.01 mol l⁻¹ sulfuric acid after 4 h. Different metal ion transport experiments showed that Cu²⁺ ions were selectively transported over other ions, such as Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, UO₂²⁺ and ZrO₂²⁺. In the presence of fluoride ions (used as a suitable masking agent in the source phase), the interfering effects of UO₂²⁺ and ZrO₂²⁺ ions were eliminated. The applicability of the method was tested on a real sample, and the results obtained show that it is potentially useful for solvent extraction of copper.