Investigation of Carbon Black Network in Natural Rubber with Different Bound Rubber Contents

A new method was applied to modify the surface activity of virginal carbon black (VCB). LA‐57, one kind of hindered amine light stabilizer, was adsorbed onto the carbon black surface through a strong shear force induced by the screws of a HAAKE internal mixer. The modified carbon black (MCB) was characterized by FT‐IR and thermogravimetric analysis (TGA). The bound rubber content of the natural rubber (NR) compounded with MCB and VCB varied with the fraction of LA‐57 on the MCB surface. The nonlinear effect at small strains, generally referred as the Payne effect, was investigated in the rubber compounds based on the different bound rubber contents. The NR compound containing the lowest bound rubber content had an obvious Payne effect. Based on the bound rubber content, the types of filler network varied from direct contact mode to the joint rubber shell mechanism.     

Influence of Bovine Bone Content on In Vitro Degradation of Poly-L-lactic Acid and Bovine Bone Composite Materials

In vitro degradation experiments of poly-L-lactic acid (PLLA) and bovine bone (BB) composites were carried out in a phosphate-buffered solution (PBS) at 37°C with a pH of 7.4. The influence of BB content on pH value of PBS, water uptake, molecular weights, molecular weight distributions, weight losses, mechanical strengths, and morphologies of PLLA/BB was investigated with degradation times. The results indicated that the presence of the BB modified the degradation of the PLLA matrix. The degradation rate of PLLA in the PLLA/BB composite was slower than the degradation rate of the sole PLLA material. Furthermore, the degradation rate of the composites became slower with the increasing content of BB in PLLA/BB composites.     

Determination of Chloride Content in Different Types of Cement Using Laser-Induced Breakdown Spectroscopy

The characterization and accurate determination of the chloride content in cement/concrete is very important for the assessment of the durability and safety of a concrete structure. The available analytical techniques are relatively expensive and time consuming. In this study, a laser-induced breakdown spectroscopy (LIBS) system was used for determination of elemental composition in three different types of cement samples. The plasma was generated by focusing a pulsed Nd: YAG laser at 1064 nm on the cement samples. The concentrations of different elements of significance for structural stability in cement samples were determined. The evaluation of the potential and the capabilities of LIBS as a rapid tool for characterization of cement samples is discussed. The optimum LIBS setup and experimental conditions to detect and measure chloride in building materials are reported. The LIBS results were compared with the results obtained using a standard analytical technique such as inductively coupled plasma emission spectroscopy (ICP–ES). The limits of detection were determined, and calibration curves were measured. The results of this investigation indicate the reliability of LIBS to characterize different cement samples and to assess the chloride content in these cements.     

Solid Introduction to an ICP-Atomic Emission Spectrometer for the Analyses of Metals Contents of Air Filters

The direct introduction of solid samples (air filters) to the inductively coupled plasma source of an atomic emission spectrometer using a furnace atomizer has been studied. Conditions have been found for the analysis of elements which volatilize with varyling degrees of difficulty. Lead, copper and vandaium compounds retained on glass fibre filters from air pollution studies have been determined. The results are in good agreement with those obtained by means of established sample dissolution/atomic emision methods.     

Combined effects of high pressure and sodium hydrogen carbonate treatment on pork ham: improvement of texture and palatability

In this study, the combined effects of high pressure and sodium hydrogen carbonate (NaHCO₃) treatment on the physical and chemical properties, and palatability of pork ham, a tough and under-utilized meat, were investigated. Assessment of meat properties with heat treatment, after exposure to NaHCO₃ and high pressure treatment, revealed an increase in water content, and decreased weight reduction and rupture stress. The free amino acid content of meat samples increased with NaHCO₃ and high pressure treatment. The effect of high pressure processing was especially notable at a pressure of 300 MPa. Sensory evaluation showed that meat subjected to high pressure processing after NaHCO₃ treatment was tender and juicy. In addition, the sample produced minimal residue in the mouth and was characterized by a good taste.     

Mechanistic studies of reactions catalysed by diamine oxidase using isotope effects

Diamine oxidase (DAO), the enzyme that is responsible for amine biodegradation in animals, plants and humans, catalyses the biotransformation of amines such as histamine (HA), putrescine, 1-phenylethylamine, tyrosine, tryptamine, serotonine and spermine. The kinetic and solvent isotope effects (SIEs) were applied to study the mechanism of the biotransformation using HA and its methylderivatives. The SIE for the biotransformation of HA, N^τ-methylhistamine and N^π-methylhistamine was found to be 3.58, 2.22 and 5.70 on V_max, and 1.58, 1.06 and 1.14 on V_max/K_M, respectively. On the other hand, the kinetic isotope effect for oxidation of stereospecifically deuterium-labelled [(α R)-²H]-N^τ-methylhistamine and [(α R)-²H]-N^π-methylhistamine was 0.69 and 0.62 on V_max, and 15.06 and 7.50 on V_max/K_M, respectively. These results demonstrate that DAO catalyses amine biotransformation by stereospecifically cleaving the αC\bond H bond in the pro-S position. Moreover, the oxidation of amine to aldehyde involves several transition states, including hybridisation change from sp³ (Schiff base) to sp² (imine), then back again to sp³ to give a final product with hybridisation sp² (aldehyde).     

Mehr-Detektor-Anordnung für die Koinzidenzmessung von Positronenstrahlern

Procedures are given for the title compounds, which allow their preparation in high chemical purity and without any depletion of the ¹⁵N-content. A nitrogen isotope exchange between NOBF₄ and ¹⁵N₂O₃ was found, but it is too slow for preparative purposes.     

Sputtering of SiC with low energy He and Ar ions under grazing incidence

The effect of low energy sputtering under grazing incidence upon the surface composition of SiC was investigated by Auger electron spectroscopy. The energy of the sputtering projectiles (He, Ar) varied from 200 to 1500?eV. Peak shifts to the higher energies with increasing argon ion energy were observed for all silicon and carbon Auger transitions. These shifts were explained by enhanced damage of the surface region within the sampling depth of the Auger electrons. The insensitivity of the Auger peak position to the energy of helium ions indicates that the damage state in the surface region does not change with the increasing energy of helium ions. An increase of the carbon concentration with the decrease of the argon energy was observed. The experiments were accompanied by dynamic Monte Carlo simulations by the TRIDYN code.     

Density effects of heavy-ion stopping power in high temperature matter

Abstract

The stopping power and range for Xe ions in high temperature matter (partially ionized plasmas) have been calculated using the dielectric response function method. Calculations have been made for a target matter Al (Z = 13) over a wide range of temperatures and densities considering a finite temperature model. The stopping powers obtained have smaller values in comparison with those of a zero temperature model. The stopping power strongly depends on the density and temperature of the target material, and the projectile ion energy.     

The measurement of solid–liquid interfacial energy in colloidal suspensions using grain boundary grooves

Interfacial energy is a fundamental physiochemical property of any multi-phase system. Among the most direct approaches for determining solid–liquid interfacial energy is a technique based on measuring the shape of grain boundary grooves in specimens subjected to a linear temperature gradient. This technique was adapted to crystallizing colloids in a gravitational field. Such colloids exhibit a freezing–melting phase transition and are important not only as self-assembling precursors to photonic crystals, but also as physical models of atomic and molecular systems. The grain boundary groove technique was tested using suspensions of sterically stabilized poly(methyl methacrylate) spheres, which have been shown to closely approximate the hard sphere potential. Whereas isotropic models did not fit grain boundary groove data well, the capillary vector model, which is suitable for both isotropic and anisotropic surface energies, produced γ₁₁₀?=?0.58?±?0.05 k _B T/σ². This value of interfacial energy is in agreement with many of the published values for hard spheres, supporting the validity of our grain boundary groove technique adaptations to colloidal systems in a gravitational field. Finally, kinks observed in groove profiles suggest a minimum anisotropy parameter of ε?=?0.029 for hard spheres.