Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions

The corrosion and passivation of Zn powder particles dispersed in a paste electrode immersed in 0.5 M Na₂SO₄ and 5×10^–3 M Na₂HPO₄ solutions were studied mainly by electrochemical impedance spectroscopy. The role played by diffusion in the mechanism of anodic oxidation of zinc powder particles has been shown. It was demonstrated that the anodic reactionof Zn powder in neutral or near neutral media involves at least two adsorbed intermediates. By simulating the porous structure of the electrode, some information about porous nature of zinc electrode could be extracted. Electronic Publication     

碳糊修饰电极吸附伏安法测定食品中的锑

研制了溴邻苯三酚红 (BPR)作修饰剂的碳糊修饰电极 ,并用此电极作工作电极建立了测定痕量锑的吸附伏安法。在选定的实验条件下 ,峰电流与Sb(Ⅲ )浓度在 8.0× 1 0 -9～ 2 .0× 1 0 -7mol L范围内呈线性关系 ,检出限为 2 .0×1 0 -9mol L ,1 0次测定相对标准偏差为 2 .0 % ,不用分离 ,可直接测定食品中痕量Sb(Ⅲ ) ,测定的回收率为 90 %～ 1 0 3%。     

土豆汁修饰碳糊电极测定色氨酸的研究

本提出了用于测定色氨酸的土豆汁修饰碳糊电极，该电极选择性好，能有效地消除酪氨酸的干扰，在ｐＨ＝７．４的ＮａＨ２ＰＯ４－ＮａＯＨ生理缓冲液中，电极响应与色氨酸在９．８×１０＾－６～９．８×１０＾－５ｍｏｌ／Ｌ的浓度范围内呈线性关系，最低检出限是１．５×１０＾－６ｍｏｌ／Ｌ．并详细讨论了电极抗干扰能力与测定条件的关系。用该电极测定了实际样品氨基酸注射液中色氨酸的含量，结果与标准值吻合。     

蒙脱石修饰碳糊电极测定氨基酸的研究：Ⅱ.酪氨酸的测定

本文报道蒙脱石修饰碳糊电极测定酪氨酸，在０．００１ｍｏｌ／Ｌ ＫＣｌ－ＨＣｌ（ｐＨ＝２．０）溶液中开路富集，介质交换后微分脉冲阳极溶出伏安法测定，在０．５－２．５μｇ／ｍｌ范围内有线性，检测限为６３ｎｇ／ｍｌ。可避免其他氨基酸，微量元素和常量金属元素的干扰，直接用于氨基酸药物样品的分析，获得了满意的结果，还对酪氨酸在电极上的反应机理进行了探讨。     

N-乙酰-L-半胱氨酸在咖啡酸修饰碳糊电极上的电催化氧化

研究了N-乙酰-L-半胱氨酸（N-acetyl-L-cysteine,NAC）在咖啡酸（CFA）修饰碳糊电极（CFA/CPE）上的电催化行为。结果表明,NAC在裸碳糊电极（CPE）上的直接电化学氧化过程十分迟缓,而CFA/CPE对NAC的电化学氧化具有良好的催化作用。用循环伏安法（CV）、计时电流法（CA）测定了NAC在CFA/CPE上的电极过程动力学参数。电荷传递系数α=0.79,电催化氧化反应速率常数k=（4.40±0.10）×10^3（mol.L^-1）^-1.s^-1。用微分脉冲伏安法（DPV）测得催化氧化峰电流与NAC浓度在1.0×10^-6～7.5×10^-4mol.L^-1范围内呈良好的线性关系,线性回归方程为Ipa（μA）=4.075c（mmol.L^-1）＋2.671,r=0.9988,检出限为1.7×10^-7mol.L^-1。用该方法对市售药品富露施中的NAC含量进行测定,结果令人满意。     

Indirect Determination of Trace Copper(II) by Adsorptive Stripping Voltammetry with Zincon at a Carbon Paste Electrode

Traces of copper(II) can be determined by adsorptive stripping voltammetry using 2‐carboxy‐2′‐hydroxy‐5′‐sulfoformazyl benzene (Zincon) as complex forming reagent. First in phosphate buffer pH 6.4, copper(II)‐Zincon complex was adsorbed on carbon paste electrode (CPE) with an accumulation potential of 0.6 V. Following this, adsorbed complex was oxidized and detected by differential pulse voltammetric (DPV) scan from 0.6 to 1.0 V. The effective parameters in sensor response were examined. The detection limit (DL) of copper(II) was 1.1 μg/L and relative standard deviations (RSDs) for 10 and 200 μg/L Cu(II) were 1.81 and 1.03%, respectively. The calibration curve was linear for 2–220 μg/L copper(II). The resulting CPE does not use mercury and therefore, has a positive environmental benefit. The method, which is reasonably sensitive and selective, has been successfully applied to the determination of trace amount of copper in water and human hair samples.     

Voltammetric Determination of Methimazole Using a Carbon Paste Electrode Modified with a Schiff Base Complex of Cobalt

The electrochemical behavior of methimazole, as an antithyroid agent, is investigated on the surface of a carbon‐paste electrode modified with a newly synthesized Schiff base complex of cobalt. The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of methimazole, leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction. The mechanism of the electrocatalytic process on the surface of the modified electrode is analyzed by obtaining the cyclic voltammograms in various potential sweep rates and pHs of the buffer solutions. The differential pulse voltammetry is applied as a very sensitive analytical method for the determination of sub‐micromolar amounts of methimazole. A linear dynamic range of 1×10^?6 to 1×10^?4 M with a detection limit of 5×10^?7 M is resulted for methimazole. The modified electrode is successfully applied for the accurate determination of methimazole in pharmaceutical and clinical preparations. The linear range in calibration curves remains constant in addition to tablet preparations of methimazole and also in spiking to the synthetic human serum samples. In comparison to calibration curves in background buffer solution, the slope of the curves showed a variation less than 3% in determinations in background solutions of tablet and human synthetic serum samples. These results showed high efficiency of the Voltammetric procedure for accurate determination of methimazole in drug and clinical preparations. The modified electrode can be prepared very easy and renewed in its surface by simple polishing. The reproducibility of the electrode response, based on ten measurements during two month, was 3.2% for the slope of the calibration curve.     

Determination of Some Heavy Metal Ions with a Carbon Paste Electrode Modified by Poly(glycidylmethacrylate‐methylmethacrylate‐divinylbenzene) Microspheres Functionalized by 2‐Aminothiazole

A carbon paste electrode modified with 2‐aminothiazole functionalized poly(glycidylmethacrylate‐methylmethacrylate‐divinylbenzene) microspheres was used for trace determination of mercury, copper and lead ions. After the open‐circuit accumulation of the heavy metal ions onto the electrode, the sensitive anodic stripping peaks were obtained by square wave anodic stripping voltammetry (SWASV)). Many parameters such as the composition of the paste, pH, preconcentration time, effective potential scan rate and stirring rate influence the response of the measurement. The procedures were optimized for most sensitive and reliable determinations of the desired species. For a 10‐min preconcentration time in synthetic solutions at optimum instrumental and experimental conditions, the detection limit (LOD) was 12.3, 2.8 and 4.5 μg L^?1 for mercury, copper and lead, respectively. The limits of detection may be enhanced by increasing the preconcentration time. For example, LOD of mercury and copper was 4.9 and 1.0 μg L^?1 for fifteen minutes preconcentration time. The sensitivity may also considered to be increased by using a more suitable electrode composition targeting the more conductive electrode with lesser amount of modified polymer for sub‐μg L^?1 levels of heavy metal ions. The optimized method was successfully applied to the determination of copper in tap water and waste water samples by means of standard addition procedure. The copper content found was comparable with the certified concentration of the waste water sample. The calibration plots for mercury and lead spiked real samples were also drawn.     

PVC Supported Liquid Membrane and Carbon Paste Potentiometric Sensors Incorporating a Mn(III)‐Porphyrin for the Direct Determination of Undissociated Paracetamol

PVC supported liquid membrane and carbon paste potentiometric sensors incorporating an Mn(III)‐porphyrin complex as a neutral host molecule were developed for the determination of paracetamol. The measurements were carried out in solution at pH 5.5. Under such conditions paracetamol exists as a neutral molecule. The mechanism of molecular recognition between the Mn(III)‐porphyrin and paracetamol, leading to potentiometric signal generation, is discussed.     

A novel palygorskite-modified carbon paste amperometric sensor for catechol determination

A palygorskite-modified carbon paste electrode (CPE) was constructed using graphite powder mixed with palygorskite particles. Compared with the unmodified CPE, the resulting palygorskite-modified CPE remarkably increases the peak currents of catechol, and greatly lowers the peak potential separation. Therefore, the palygorskite exhibits catalytic activity to catechol and significantly improves the determining sensitivity. The electrocatalytic activity of palygorskite is attributed to its high adsorption capability and the –OH groups on its surface, which plays an important role in the electron transfer between the modified CPE and the catechol in the solution. The sensor shows a linear response range between 5 and 100 μM catechol with a correlation coefficient of 0.998. The detection limit was calculated as 0.57 μM (s/n = 3).