Detection of antisperm antibody in human serum using a piezoelectric immunosensor based on mixed self-assembled monolayers

A novel piezoelectric immunosensor based on mixed self-assembled monolayers (mixed SAMs) formed by short-chain amine- and carboxyl-terminated thiols has been developed to immobilize antigens onto gold electrodes for detecting antisperm antibody (AsAb) in human serum samples. The properties and the enhanced performance of the affinity biosensor interface based on mixed SAMs are investigated. Most importantly, analytical results of several human serum samples using the developed technique are in satisfactory agreement with those given by the enzyme-linked immunosorbent assay (ELISA) method in the concentration ranging from 32.3 to 300.0 mU/ml. It means the procedure proposed in this paper is likely to have a great potential in research and may play an important clinical role in a few years later.     

Application of an artificial neural network (ANN) and piezoelectric chemical sensor array for identification of volatile organic compounds

A piezoelectric chemical sensor array was developed using four quartz crystals. Gas chromatographic stationary phases were used as sensing materials and the array was connected to an artificial neural network (ANN). The application of the ANN method proved to be particularly advantageous if the measured property (mass, concentration, etc.) should not be connected exactly to the signal of the transducers of the piezoelectric sensor. The optimum structure of neural network was determined by a trial and error method. Different structures were tried with several neurons in the hidden layer and the total error was calculated. The optimum values of primary weight factors, learning rate (η=0.15), momentum term (μ=0.9), and the sigmoid parameter (β=1) were determined. Finally, three hidden neurons and 900 training cycles were applied. After the teaching process the network was used for identification of taught analytes (acetone, benzene, chloroform, pentane). Mixtures of organic compounds were also analysed and the ANN method proved to be a reliable way of differentiating the sensing materials and identifying the volatile compounds.     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

压电石英晶体在电解质水溶液中的振荡性能研究(Ⅱ)——频率、频移特性

根据两面电极浸入液体中的压电晶体等效电路模型和Pierce振荡器振荡方程的解,得到晶体在电解质溶液中的振荡频率(F_1)与溶液电导率(x)的关系式:F_1=(1/2π)(1/C_1+1/C_2)(1/X_e)[(R_e~2+X_e~2)x~2+2R_ex+1]。以自行设计的Pierce晶体振荡器。研究了晶体和主振电路参数、输入电压及检测池外壳屏蔽接地对AT切9MHz石英晶体在KCl、Na_2SO_4水溶液中的频率、相对于纯水频移随溶液电导率变化的影响规律,结果与上式相符。     

Applications of Macrocyclic Polyethers in Analytical Sensors and Ion Separation

Artificial macrocyclic polyethers were synthesized and applied as neutral carriers for ion-selective PVC membrane electrodes, ion-chromatographic packing materials, extractants and adsorbents for ion separation, coating materials for piezoeletrical membrane sensors for organic species, and ion-transport carriers through liquid membranes. Ion-selective electrodes such as those for K⁺ Na⁺, UO₂²⁺, Cs⁺, Pb²⁺, Fe³⁺, Hg²⁺ and Ag⁺ ions based on crown ether-phosphotungstic acid (PW) precipitates and dithio crown ethers respectively were prepared and showed good sensitivity and selectivity. Crown ether-PW precipitates were applied as adsorbents of rare-earth ions and some common heavy-metal ions. Some rare-earth ions were easily extracted with crown ethers, especially 15-crown-5. Poly(stytene/divinyl benzene) cryptand-22 resin was synthesized and applied as a bifunctional stationary phase of ion chromatography to separate bom cations and anions, even some organic carboxylate geometric isomers. Crown ethers such as mono-benzo-15-crown-5 was successfully applied as a coating material on piezoelectric quartz membrane sensors for some organic species. The oscillation frequency of the crown-ether quartz-membrane sensor was sensitive to organic vapours such as amines and alcohols. Upon adsorption of organic species on the crown-ether quartz membrane, the oscillation frequency of the sensor decreased obviously. Special crown ether such as dibenzo-16-crown-5-oxyacetic acid, decyl-cryptand-22 and 1, 4-dihydro-pyridine-18-crown-5 were synthesized and successfully applied as ion-transport carriers (ionophores) for transport of Na⁺ K⁺ and Mg²⁺ ions through liquid membranes.     

Mixed mode fracture of a piezoelectric–piezomagnetic bi-layer structure with two un-coaxial cracks parallel to the interface and each in a layer

The purpose of the present work is to study the mixed mode fracture of a piezoelectric–piezomagnetic composite with two un-coaxial cracks parallel to the interface and each in a layer. Methods of generalized dislocation simulation, Green’s function, Cauchy singular integral equation and Lobatto–Chebyshev collocation are combined together to get the numerical results of mechanical strain energy release rate (MSERR). Three kinds of effects are revealed by parametric studies, i.e., the free-surface effect, the shielding effect and the interference effect, and they are used to interpret the characteristics of COD and MSERR curves. In addition, the effects of shear loading, magnetic loading and electric loading on MSERR are also disclosed, respectively, by varying the corresponding loading factor.     

Exact solutions of functionally graded piezoelectric material sandwich cylinders by a modified Pagano method

The three-dimensional (3D) coupled analysis of simply-supported, functionally graded piezoelectric material (FGPM) circular hollow sandwich cylinders under electro-mechanical loads is presented. The material properties of each FGPM layer are regarded as heterogeneous through the thickness coordinate, and obey an exponent-law dependent on this. The Pagano method is modified to be feasible for the study of FGPM sandwich cylinders. The modifications are as follows: a displacement-based formulation is replaced by a mixed formulation; a set of the complex-valued solutions of the system equations is transferred to the corresponding set of real-valued solutions; a successive approximation method is adopted to approximately transform each FGPM layer into a multilayered piezoelectric one with an equal and small thickness for each layer in comparison with the mid-surface radius, and with the homogeneous material properties determined in an average thickness sense; and a transfer matrix method is developed, so that the general solutions of the system equations can be obtained layer-by-layer, which is significantly less time-consuming than the usual approach. A parametric study is undertaken of the influence of the aspect ratio, open- and closed-circuit surface conditions, and material-property gradient index on the assorted field variables induced in the FGPM sandwich cylinders.     

Growth of piezoelectric quartz crystals of large dimension on seeds parallel to the (10–11) face and lengthened along the Y-axis

Abstract

We have grown crystals on seeds parallel to the side of the negative rhombohedron by the hydrothermal method. Their dimension was equal to the projection one along the Y-axis to the plane (01–11) and approximately exceeded the size of the crystal along the X-axis by one order. In Russia these crystals are referred to as - ry′. The maximal sizes of ry′ -cryszals are 410mm and 120mm along the Y- and X-axes, respectively. It is established that each crystal increases its dimension along the X-axis due to the formation of the sides of the sharpest rhombohedron (20–21). These faces form the pyramids of growth by which it is possible to get the plates from an average part of each crystal. Their dimension exceeds the initial one by 15-20mm along the X-axis. We have studied the structural and morphological properties of ry′ -crystals grown at different rates at the temperature of crystallization of 330-410°C and a pressure up to 150 MPa.     

Properties of cat-eye modulating retro-reflector and its application with piezoelectric transducer

Piezoelectric cat-eye modulating retro-reflector (MRR) is the core component of an acousto-optic retro-identification system. The influence of the optical parameters (link distance l, lens focal length f and the detector diameter r) to the cat-eye effect was analyzed theoretically and experimentally. A piezoelectric cat-eye retro-identification (PCERI) system was built, and an information transmission ratio of 2 kHz was achieved which can satisfy an access control system.     

The temperature-dependent domains, SHG effect and piezoelectric coefficient of TGS

The temperature-dependent,second-order,nonlinear,optical coefficient(x^（2）).piezoelectric coefficient (d₃₃),pyroelectric coefficient（Ps） and domains on triglycine sulfate（TGS） reported herein provide a clue for us to investigate these as a typical second-order phase transition.The symmetry breaking occurrence is definitely confirmed by the temperature-dependent x^（2） in which x^（2） displays a limited value at the ferroelectric phase,indicating the space group（P2₁） chosen is correct,and when x^（2） basically maintains a zero value at the paraelectric phase,indicating the space group should be centric.Interestingly,after normalization of x^（2）,d₃₃ or Ps,the change trend with temperature is basically overlapped,probably abiding by Landau theory.Moreover,temperature-dependent domains directly show the symmetry breaking occurrence.