Solvent-free low-dimensional polymer electrolytes for lithium-polymer batteries

The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, m = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type B) are discussed. However, high ambient conductivities (10(-4)-10(-3) S cm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities >/=ca.10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces.     

Graded PZT ceramics for piezoelectric transformers

In the present study two types of the synthesized Pb(Zr_1−xTi_x)O₃ (PZT) powders differing in Zr/Ti ratio were used to prepare the spatially inhomogeneous (i.e., graded) structure. A position-dependent chemical composition was expected to cause the property gradient. Disk-shaped compacts were prepared in a way such that two different orientations of the radial gradients were formed. The solid state sintering under pressure was utilized to prepare ceramics. Simultaneous thermal analysis was used to study thermal behavior of the ceramic powders. Graded PZT ceramics were characterized using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. It was also characterized in terms of its dielectric properties by both bridge technique and the impedance spectroscopy. On the basis of graded PZT ceramics the disk-shaped radial mode piezoelectric transformer was developed and fabricated.     

Computationally-assisted approach to the vibrational spectra of molecular crystals: study of hydrogen-bonding and pseudo-polymorphism.

A new computationally-assisted methodology (PiMM), which accounts for the effects of intermolecular interactions in the crystal, is applied to the complete assignment of the Raman and infrared vibrational spectra of room temperature forms of crystalline caffeine, theobromine, and theophylline. The vibrational shifts due to crystal packing interactions are evaluated from ab initio calculations for a set of suitable molecular pairs, using the B3LYP/6-31G* approach.The proposed methodology provides an answer to the current demand for a reliable assignment of the vibrational spectra of these methyl-xanthines, and clarifies several misleading assignments. The most relevant intermolecular interactions in each system and their effect on the vibrational spectra are considered and discussed. Based on these results, significant insights are obtained for the structure of caffeine in the anhydrous form (stable at room temperature), for which no X-ray structure has been reported. A possible structure based on C((8))--H...N((9)) and C((1,3))--H...O intermolecular interactions is suggested.     

Thermotropic Liquid Crystals Based on Extended 2,5‐Disubstituted‐1,3,4‐Oxadiazoles: Structure–Property Relationships,Variable‐Temperature Powder X‐ray Diffraction,and Small‐Angle X‐ray Scattering Studies

A class of extended 2,5‐disubstituted‐1,3,4‐oxadiazoles R¹‐C₆H₄‐{OC₂N₂}‐C₆H₄‐R² (R¹=R²=C₁₀H₂₁O 1 a , p‐C₁₀H₂₁O‐C₆H₄‐C?C 3 a , p‐CH₃O‐C₆H₄‐C?C 3 b ; R¹=C₁₀H₂₁O, R²=CH₃O 1 b , (CH₃)₂N 1 c ; F 1 d ; R¹=C₁₀H₂₁O‐C₆H₄‐C?C, R²=C₁₀H₂₁O 2 a , CH₃O 2 b , (CH₃)₂N 2 c , F 2 d ) were prepared, and their liquid‐crystalline properties were examined. In CH₂Cl₂ solution, these compounds displayed a room‐temperature emission with λ_max at 340–471 nm and quantum yields of 0.73–0.97. Compounds 1 d , 2 a – 2 d , and 3 a exhibited various thermotropic mesophases (monotropic, enantiotropic nematic/smectic), which were examined by polarized‐light optical microscopy and differential scanning calorimetry. Structure determination by a direct‐space approach using simulated annealing or parallel tempering of the powder X‐ray diffraction data revealed distinctive crystal‐packing arrangements for mesogenic molecules 2 b and 3 a , leading to different nematic mesophase behavior, with 2 b being monotropic and 3 a enantiotropic in the narrow temperature range of 200–210 °C. The structural transitions associated with these crystalline solids and their mesophases were studied by variable‐temperature X‐ray diffractometry. Nondestructive phase transitions (crystal‐to‐crystal, crystal‐to‐mesophase, mesophase‐to‐liquid) were observed in the diffractograms of 1 b, 1 d , 2 b, 2 d , and 3 a measured at 25–200 °C. Powder X‐ray diffraction and small‐angle X‐ray scattering data revealed that the structure of the annealed solid residue 2 b reverted to its original crystal/molecular packing when the isotropic liquid was cooled to room temperature. Structure–property relationships within these mesomorphic solids are discussed in the context of their molecular structures and intermolecular interactions.     

聚合物 分散液晶体系的相分离结构对温度依赖性的研究

在不同温度下采用紫外光引发相分离法制备了聚合物分散液晶样品．用光学显微镜及扫描电镜研究了样品的相分离结构．采用对样品施加电压观察其微结构轮廓，或测量液晶微粒相变点的简单方法研究了聚合温度对相分离结果的影响．结果表明，在一定温度范围内，随着温度的增高，液晶微粒的平均尺寸趋于减小，而且形成的液晶微粒也逐渐变纯．作者给出了这些测试结果并进行了讨论．     

Detection of antisperm antibody in human serum using a piezoelectric immunosensor based on mixed self-assembled monolayers

A novel piezoelectric immunosensor based on mixed self-assembled monolayers (mixed SAMs) formed by short-chain amine- and carboxyl-terminated thiols has been developed to immobilize antigens onto gold electrodes for detecting antisperm antibody (AsAb) in human serum samples. The properties and the enhanced performance of the affinity biosensor interface based on mixed SAMs are investigated. Most importantly, analytical results of several human serum samples using the developed technique are in satisfactory agreement with those given by the enzyme-linked immunosorbent assay (ELISA) method in the concentration ranging from 32.3 to 300.0 mU/ml. It means the procedure proposed in this paper is likely to have a great potential in research and may play an important clinical role in a few years later.     

Ionic discotic liquid crystals: synthesis and characterization of pyridinium bromides containing a triphenylene core

Five novel pyridinium salts tethered with hexaalkoxytriphenylene molecules were synthesized by the quaternization of pyridine with ω-bromo-substituted triphenylene derivatives. Their chemical structures were determined by ¹H NMR, ¹³C NMR, IR, UV spectroscopy and elemental analysis. The thermotropic liquid crystalline properties of these salts were investigated by polarizing optical microscopy and differential scanning calorimetry. These triphenylene-based pyridinium salts with bromide as counterion were found to be mesomorphic over a wide temperature range.     

Application of an artificial neural network (ANN) and piezoelectric chemical sensor array for identification of volatile organic compounds

A piezoelectric chemical sensor array was developed using four quartz crystals. Gas chromatographic stationary phases were used as sensing materials and the array was connected to an artificial neural network (ANN). The application of the ANN method proved to be particularly advantageous if the measured property (mass, concentration, etc.) should not be connected exactly to the signal of the transducers of the piezoelectric sensor. The optimum structure of neural network was determined by a trial and error method. Different structures were tried with several neurons in the hidden layer and the total error was calculated. The optimum values of primary weight factors, learning rate (η=0.15), momentum term (μ=0.9), and the sigmoid parameter (β=1) were determined. Finally, three hidden neurons and 900 training cycles were applied. After the teaching process the network was used for identification of taught analytes (acetone, benzene, chloroform, pentane). Mixtures of organic compounds were also analysed and the ANN method proved to be a reliable way of differentiating the sensing materials and identifying the volatile compounds.     

Thermotropic Liquid Crystals Formed by Intermolecular Hydrogen Bonding Interactions

The role of hydrogen bonding in the formation or stabilization of liquid crystalline phases has only recently been appreciated. Following the first, wellestablished examples of liquid crystal formation from the dimerization of aromatic carboxylic acids, through hydrogen bonding, several classes of compounds have recently been synthesized, the liquid crystalline behavior of which is also dependent on intermolecular hydrogen bonds between similar or dissimilar molecules. In this review the main classes of compounds exhibiting liquid crystallinity due to hydrogen bonding are presented to show the diversity of organic compounds that can be used as building elements in liquid crystals. The molecules are either of the rigid-rod anisotropic or amphiphilic types such as molecules appropriately functionalized with pyridyl and carboxyl groups, whose interaction leads to the formation of liquid crystals; amphiphilic carbohydrates and amphiphilic and bolaamphiphilic compounds with multiple hydroxyl groups whose dimerization or association is indispensable for the formation of liquid crystals; and certain amphiphilic carboxylic acids with monomeric or polymeric mesogens and amphiphilic-type compounds bearing different moieties, whose interaction may lead to the formation of mesomorphic compounds. Associated with the macroscopic display of liquid crystalline phases is the supramolecular structure, and therefore rather extended discussion of these structures are included in this review.