New functionalized polyesters to achieve controlled architectures

Following our continued interest in the production of bioerodible and biodegradable functional polymers for biomedical applications, we synthesized and characterized new unsaturated polyesters. The presence of functional groups in the polymer backbone provided sites for chemical modification, and through a variation in the structure, the physical properties, such as the hydrophilicity and solubility, could be affected. With 1,1-di-n-butyl-stanna-2,7-dioxacyclo-4-heptene as the initiator in the ring-opening polymerization of polyesters, a new set of functionalized polyesters was created. The polymerization of ϵ-caprolactone resulted in poly(ϵ-caprolactone) with a double bond incorporated into the structure. The polymers were obtained in a controlled manner with low molecular dispersities. The double bond was previously incorporated into L -lactide polymers, and the two reactions were compared in this study. The conversion of ϵ-caprolactone, with a degree of polymerization of 50, was completed within 140 min, whereas for L -lactide, only a 45% conversion took place in the same period of time. The dispersities were somewhat higher with ϵ-caprolactone because of the higher reaction rate and, therefore, lower selectivity. The incorporated CC double bond in the polyesters provided a variety of opportunities for further modifications. In this case, the double bond of the L -lactide macromonomers was oxidized into epoxides. Epoxidation was carried out with m-chloroperoxybenzoic acid as a chemical reagent. The conversion of the double bonds into epoxides was completed, and the obtained yields were good (>95%). As a result of the mild reaction conditions, the epoxidation of the double bond was carried out quantitatively without any side reactions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 444–452, 2004     

Controlling the water content of never dried and reswollen bacterial cellulose by the addition of water-soluble polymers to the culture medium

For the modification of medically useful biomaterials from bacterially synthesized cellulose, fleeces of Acetobacter xylinum have been produced in the presence of 0.5, 1.0, and 2.0% (m/v) carboxymethylcellulose (CMC), methylcellulose (MC), and poly(vinyl alcohol) (PVA), respectively, in the Hestrin-Schramm culture medium. The incorporation of the water-soluble polymers into cellulose and their influence on the structure, crystal modifications, and material properties are described. With IR and solid-state ¹³C NMR spectroscopy of the fleeces, the presence of the cellulose ethers and an increase in the amorphous parts of the cellulose modifications (NMR results) have been detected. The incorporation is represented by a higher product yield, too. As demonstrated by scanning electron microscopy, a porelike cellulose network structure forms in the presence of CMC and MC. This modified structure increases the water retention ability (expressed as the water content), the ion absorption capacity, and the remaining nitrogen-containing residues from the culture medium or bacteria cells. The water content of bacterial cellulose (BC) in the never dried state and the freeze-dried, reswollen state can be controlled by the CMC concentration in the culture solution. The freeze-dried, reswollen BC-CMC (2.0%) contains 96% water after centrifugation, whereas standard BC has only 73%. About 98% water is included in a BC-MC composite in the wet state, and about 93% is included in the reswollen state synthesized in the presence of 0.5, 1.0, or 2.0% MC. These biomaterial composites can be stored in the dried state and reswollen before use, reaching a higher water absorption than pure, never dried BC. The copper ion capacity of BC-CMC composites increases proportionally with the added amount of CMC. BC-CMC (0.5%) can absorb 3 times more copper ions than original BC. In the case of 0.5 and 1.0% PVA additions to the culture solution, this polymer cannot be detected in the cellulose fleeces after they are washed. Nevertheless the presence of PVA in the culture medium effects a decreased product yield, a retention of nitrogen-containing residues in the material during purification, a reduced water absorption ability, and a slightly higher copper ion capacity in comparison with original BC. The water content of freeze-dried, reswollen BC-PVA (0.5%) is only 62%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 463–470, 2004     

Polymer‐Bound,Amphiphilic Hoveyda‐Grubbs‐Type Catalyst for Ring‐Closing Metathesis in Water

Summary: We report on the synthesis of a new amphiphilic, polymer‐bound variant of the Hoveyda‐Grubbs catalyst via the coupling reaction of a carboxylic acid‐functionalized poly(2‐oxazoline) block copolymer with 2‐isopropoxy‐5‐hydroxystyrene and subsequent reaction of the resulting macroligand with a second generation Grubbs catalyst. For the benchmark, the substrate diethyl diallylmalonate was studied in the ring‐closing metathesis (RCM) reaction and a turn‐over number (TON) of up to 390 in water was achieved. To the best of our knowledge, this is the highest value for any aqueous RCM reaction to date. For the first time, recycling of a ruthenium initiator in an aqueous RCM reaction has been successful to some extent. In addition, the micellar conditions accelerate the conversion of the hydrophobic diene and at the same time stabilize the active alkylidene species, although competing decomposition of the catalyst in water still impairs the catalyst performance. Residual ruthenium content was determined to be below 1 ppm in the product suggesting a very low leaching of the polymeric catalyst system.

Simplified chemical structure of the amphiphilic, polymer‐bound Grubbs‐Hoveyda catalyst.     

Synthesis and Characterization of Star‐Shaped Diblock Poly(ε‐caprolactone)/Poly(ethylene oxide) Copolymers

Summary: Star‐shaped hydroxy‐terminated poly(ε‐caprolactone)s (ssPCL), with arms of different lengths, were obtained by ring‐opening polymerization (ROP) of ε‐caprolactone initiated by pentaerythritol, and were condensed with α‐methyl‐ω‐(3‐carboxypropionyloxy)‐poly(ethylene oxide)s ( = 550–5 000) to afford four‐armed PCL‐PEO star diblock copolymers (ssPCL‐PEO). The polymers were characterized by ¹H and ¹³C NMR spectroscopy and size‐exclusion chromatography (SEC). The melting behavior of ssPCLs was studied by differential scanning calorimetry (DSC). X‐ray diffraction and DSC techniques were used to investigate the crystalline phases of ssPCL‐PEOs.

The part of the synthesis of four‐armed star‐shaped diblock poly(ε‐caprolactone)‐poly(ethylene oxide) copolymers as described.     

Design of molecular magnets

The conventional magnetic materials used in present-day technology, such as Fe, Fe₂O₃, Cr₂O₃, SmCo₅, Nd₂Fe₁₄B, etc. are all atom-based, whose synthesis requires high-temperature routes. Employing ambient-temperature synthetic organic chemistry, it has become possible to engineer a bulk molecular material with long-range magnetic order, primarily due to the weak nature of intermolecular interactions in it. Typical synthetic approach to design molecule-based magnets consists of choosing molecular precursors, each bearing an unpaired spin, and assembling them in such a way that there is no compensation of spins at the scale of the crystal lattice. Magnetism being a co-operative effect, the spin-spin interaction must extend to all the three dimensions, either through space or through bonds. Specific occurrence of ‘spin delocalisation’ and ‘spin polarisation’ in molecular lattices is helpful in bringing about ferromagnetic interaction by facilitating necessary intermolecular exchange interactions. Since the first successful synthesis of molecular magnets in 1986, a large variety of them have been synthesized, which can be classified on the basis of the chemical nature of the magnetic units involved: organic systems, metal-based systems, hetero-bimetallic assemblies, or mixed organic-inorganic systems. The design of molecular magnets has also opened the doors for the unique possibility of designing polyfunctional molecular materials, such as magnets exhibiting second-order optical nonlinearity, liquid crystalline magnets, or chiral magnets. Solubility of molecular magnets, their low density and biocompatibility are attractive features. Being weakly colored, unlike the opaque classic magnets, possibilities of photomagnetic switching can be envisaged. Persistent efforts continue to design the ever-elusive polymer magnets for applications in industry. While providing a brief overview of the field of molecular magnetism, we highlight some recent developments, with emphasis on a few studies from the author's own lab.     

Carbon papers with conductive polymer coatings for use in solid-state supercapacitors

Conductive polymer-coated carbon papers have been fabricated through polymerisation of pyrrole-based monomers oxidised with various heteropolyacids. Smooth surfaces are obtained when multiple coatings are applied to the carbon surface and give good contact with the Nafion^® electrolyte. Cyclic voltammetry was used to study the electrodes and a.c. impedance and charge / discharge cycling was used to study membrane electrode assemblies (MEA). MEAs were fabricated using a hot-press technique.     

Polypyrrole electrodeposition on inorganic semiconductors CuInSe2 and CuInS2 for photovoltaic applications

Thin polypyrrole (PPy) layers with an average thickness of about 0.5 μm were deposited, using potentiostatic and galvanostatic techniques, on CuInSe₂ (CISe) structures prepared electrochemically on glass/ITO substrates and on CuInS₂ (CIS) structures fabricated on Cu tape substrates. The polymer layer of p-type is considered as an alternative to the traditional buffer layer and window layer in the conventional cell structure. The deposition proceeded from an aqueous solution containing sodium naphthalene-2-sulfonate as a dopant. In order to prepare stable PPy films of high quality with a good adherence to the surface of inorganic semiconductors CIS and CISe, the optimal concentrations of reagents, current densities and electrodepositing potentials were selected experimentally. Electrochemical polymerization of pyrrole to PPy on CIS surfaces is faster under white light irradiation and the polymerisation starts at lower potential than in the dark. Significant photovoltage and photocurrent of the fabricated CISe/PPy and CIS/PPy structures have been observed under standard white light illumination.     

A lutetium allyl complex that bears a pyridyl-functionalized cyclopentadienyl ligand: dual catalysis on highly syndiospecific and cis-1,4-selective (co)polymerizations of styrene and butadiene

A novel linked‐half‐sandwich lutetium–bis(allyl) complex [(C₅Me₄? C₅H₄N)Lu(η³‐C₃H₅)₂] ( 1 ) attached by a pyridyl‐functionalized cyclopentadienyl ligand was synthesized and fully characterized. Complex 1 in combination with [Ph₃C][B(C₆F₅)₄] exhibited unprecedented dual catalysis with outstanding activities in highly syndiotactic (rrrr>99 %) styrene polymerization and distinguished cis‐1,4‐selective (99 %) butadiene polymerization, respectively. Strikingly, this catalyst system exhibited remarkable activity (396 kg copolymer (mol_Lu h)^?1) for the copolymerization of butadiene and styrene. Irrespective of whether the monomers were fed in concurrent mode or sequential addition of butadiene followed by styrene, diblock copolymers were obtained exclusively, which was confirmed by a kinetics investigation of monomer conversion of copolymerization with time. In the copolymers, the styrene incorporation rate varied from 4.7 to 85.4 mol %, whereas the polybutadiene (PBD) block was highly cis‐1,4‐regulated (95 %) and the polystyrene segment remained purely syndiotactic (rrrr>99 %). Correspondingly, the copolymers exhibited glass transition temperatures (T_g) around ?107 °C and melting points (T_m) around 268 °C; typical values for diblock microstructures. Such copolymers cannot be accessed by any other methods known to date. X‐ray powder diffraction analysis of these diblock copolymers showed that the crystallizable syndiotactic polystyrene (syn‐PS) block was in the toluene δ clathrate form. The AFM micrographs of diblock copolymer showed a remarkable phase‐separation morphology of the cis‐1,4‐PBD block and syn‐PS block. This represents the first example of a lutetium‐based catalyst showing both high activity and selectivity for the (co)polymerization of styrene and butadiene.