6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

Study of the influence of substituents on spectroscopic and photoelectric properties of zinc phthalocyanines

In this paper we describe conversion of light energy into electric energy in a photoelectrochemical cell containing zinc phthalocyanine (ZnPc) dyes. For all dyes investigated in liquid polyvinyl alcohol with dimethyl sulfoxide solution and located in the photoelectrochemical cell the following measurements have been done: absorption, fluorescence, photoacoustic spectra, photovoltaic spectra, kinetics of photocurrent and current–voltage characteristics. It has been shown that all dyes located in the photoelectrochemical cell are able to convert light into electric energy but with different effectiveness. The influence of substituted different peripheral groups to ZnPc core and the correlation between the molecular structure and effectiveness of solar to electric energy conversion were observed and described. The unique behavior of ZnPc substituted with fluorines was indicated.     

聚苯胺-富勒烯复合膜的光电响应

通过溶液共混方法制备了聚苯胺（PANI）-富勒烯复合膜, 并用IR、XRD、UV-Vis等技术对其进行表征.红外光谱表明聚苯胺与C60之间存在相互作用且表现为掺杂态聚苯胺红外谱图样.X射线衍射表明复合体材料的结晶性能增强.光致发光谱表明聚苯胺与C60分子之间存在有效光诱导电荷分离现象.光电响应实验表明复合体薄膜的光吸收增强, 光电流增大, 说明聚苯胺-富勒烯复合膜受光照射后发生了光诱导电荷分离现象, C60掺杂聚苯胺有助于改善光伏特性.     

重氮树脂-聚(4-羧酸苯基)乙炔自组装膜与光电转换

近年来 ,自组装及其形成的多层复合膜已经在导电、生物传感器及非线性光学等领域得到深入研究 ,特别是以聚阴离子与聚阳离子相互作用的静电自组装研究更为深入 .这一技术制备方法简单 ,无需特别的设备 ,对膜层厚度能随意调控 ,并以水作为介质 ,对环境无害 [1～ 3] .共轭高分子 (如聚苯胺、聚吡咯及聚苯亚乙烯等 )通过自组装形成共轭高分子膜 ,对制备具有导电、光电和传输等功能的薄膜半导体器件具有重要意义 .聚乙炔类是最早被发现且理论与应用研究最多的一类共轭高分子材料[4 ,5] .本文以聚 ( 4 -羧酸苯基 )乙炔 ( PCPA)为聚阴离子 ,以重…     

Photovoltaic Cells Involving the Nonconjugated Conductive Polymer Iodine-Doped Styrene-Butadiene-Rubber (SBR)

Novel photovoltaic cells involving a nonconjugated conductive polymer have been fabricated using titanium dioxide/doped styrene-butadiene-rubber/carbon on ITO coated PET substrates. Photocurrents and photo-voltages for different intensities of light (emission at 300–700 nm) have been measured. These cells have shown significantly higher photocurrents and photo-voltages compared to previous reports. A photocurrent density of about 0.25 mA/cm² and a photo-voltage of 0.74 V have been measured for a light intensity of ～4 mW/cm².     

The preparation and properties of bulk-heterojunction organic solar cells with indole-containing fulleropyrrolidine derivatives as acceptors

Two indole-containing fullerene derivatives, N-hydrogen-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (EHIHC60P), and N-(2-ethylhexylindolyl))-2-[3-(N-2-ethylhexylindolyl)][60]fulleropyrrolidine (DEHIC60P) were synthesized by the typical Prato reaction. The absorption spectra, electrochemical properties of the two compounds were measured. Inverted solar cells were fabricated with the structure of ITO/ZnO/poly(3-hexylthiophene) (P3HT):fullerene derivatives/MoO₃/Ag. The highest power conversion efficiencies (PCEs) of 3.32% and 3.23% were obtained for P3HT/EHIHC60P and P3HT/DEHIC60P based solar cells at the composite ratio of 1:1 after the active layers were annealed at 150 °C under inert atmosphere, with a open-circuit voltage (V_oc) of 0.66 V and 0.74 V, respectively. For comparison, the device based on P3HT/PCBM at the same conditions showed the PCE of 3.28%, with a V_oc of 0.61 V. The influence on the photovoltaic property of the fullerene derivatives, which was induced by some subtle changes in the chemical structure was compared and discussed.     

Synthesis,spectral, electrochemical properties,and photovoltaic performance of structurally constrained BODIPY dyes with 4,4-dimethyltriphenylamine at the 2,6-positions

Novel symmetrical D–A–D type of BODIPY derivatives (DTPA–BDP) were synthesized successfully. The introduction of chromophoric units makes the molecule absorption wavelengths spanning the ranges of 300–800 nm and shifts the emission to 793 nm in red and near-infrared region. Bulk heterojunction solar cells with DTPA–BDPs as electron donor and PC₆₁BM as electron acceptor exhibited photovoltaic properties with a power conversion efficiency of 0.77%, an open-circuit voltage of 0.70 V.     

Improvement in electrical and photovoltaic properties of a-Si/c-Si heterojunction with slanted nano-columnar amorphous silicon thin films for photovoltaic applications

The flat a-Si and slanted nanocolumnar (S-nC) a-Si thin films were prepared on c-Si and corning glass substrates by e-beam physical vapor deposition (EB-PVD) technique. The structural properties of all the grown thin films were determined by X-Ray Diffraction (XRD) analysis and Raman spectroscopy. Surface and cross-sectional morphology of a-Si/c-Si and S-nC a-Si/c-Si heterojunctions were investigated by Field Emission Scanning Electron Microscopy (FE-SEM). Sculptured thin films demonstrate potential for significant nanoscale applications in the area of thin film technology. The electrical and photovoltaic properties of these heterojunctions have been investigated by means of dc current–voltage (I–V) measurements at room temperature in dark and light conditions. The S-nC STFs' performance has been found to be improvable on changing the morphology of the thin film. We have found that, the porous morphology of this structure improves the photosensitivity features in photovoltaic devices and solar cell technology. We gained a high open voltage value, such as 900 mV in S-nC a-Si/c-Si thin film, without any doping process.     

钙钛矿光伏电池封装材料与工艺研究进展

钙钛矿太阳能电池作为第3代新概念太阳能电池,具有高光电转换效率、低成本和可柔性加工等优点,近年来发展迅速,其光电转换效率从一开始的3.8%增长到近期的25.5%,逐渐比肩硅电池,已接近商业化应用水平。目前,实现钙钛矿太阳能电池产业应用的关键环节在于电池封装,它不仅可以解决钙钛矿光伏器件稳定性问题,还可以实现电池安全、环保和延长使用寿命等要求。结合近十几年来钙钛矿光伏电池封装材料和封装工艺两方面的发展现状,文中介绍了钙钛矿电池封装领域取得的成果和存在的不足,讨论了目前现有封装技术的优缺点,以及它们适用的不同器件类型。着重在不同温度湿度条件下,比较了不同封装材料性能、封装工艺条件对钙钛矿电池效率及稳定性的影响,归纳出影响钙钛矿电池薄膜封装效果的3个关键因素： 聚合物的弹性模量、水蒸气透过率、加工温度。比较了不同聚合物薄膜封装材料适宜的加工温度、优缺点及加工成本。可以看出,随着钙钛矿光伏电池工业化需求的强烈增长和人们对其封装材料研究的不断深入,研究适合大面积生产和光伏建筑一体化的新型功能聚合物封装材料将是必然趋势。     

Electro-photo modulation of the fermi level in WSe2/graphene van der Waals heterojunction

We report an electro-photo double modulation of the fermi level in a WSe₂/graphene heterojunction. The heterojunction exhibits high I_ON/I_OFF ratio (~10³) in transfer characteristic in dark and distinct rectification behavior in output characteristic under light illumination, respectively. Time-dependent photoresponse reveals that the heterojunction has a considerable potential in the application of photodetection. Interestingly, an exotic current peak is observed in transfer characteristic under light illumination. This novel behavior is attributed to the tunable fermi level at the WSe₂/graphene heterojunction by electro-photo double modulation. The results may be helpful to develop tunable photovoltaic optoelectronics based on van der Waals heterojunctions.