Skin Constituents as Cosmetic Ingredients. Part II: A Study of Bio‐Mimetic Monoglycerides Behavior at the Squalene‐Water Interface by the “Pendant Drop” Method in a Dynamic Mode

This work aims at presenting the viscoelastic behavior of bio‐mimetic monoglycerides used as emulsifier in a mixture made of two non‐miscible liquids, squalene and water. The measurement of the interfacial tension, carried out by the “pendant drop” method in “dynamic” mode, made it possible to characterize these amphiphilic molecules according to the value of their elastic modulus, ?, as well as their relaxation time, τ_R.

The analysis of these parameters, as well as those developed in the previous publication [L. Blasco et al. (2006) Skin constituents as cosmetic ingredients. Part I: A Study of bio‐mimetic monoglyceride behavior at the squalene‐water interface by the “pendant drop” method in a static mode. J. Dispers. Sci. Technol., 27(6).] shows that the hydrocarbon chain structure, such as its length, the presence of one or more unsaturations, hydroxyl function, affects the behavior of surfactant molecules at the squalene/water interface.     

Adsorption of Nonionic Surfactant from Its Aqueous Solution onto Commercial Rubber

Adsorption of Ethoxylated Nonyl Phenol (ENP) surfactant from its aqueous solution onto a commercial tire cutting from different sites. Outer Peristalitic (O.P.), Outer Smouth (O.S.), and Internal Tire (I.T.) is studied after different immersion times, 24, 48, 72, and 144 hrs at 30° C. The adsorption isotherms are determined by a surface tension method. A two stepped L-type isotherm is characteristic below the CMC of ENP; above this concentration the isotherm deviates from the L-type and the slope of the isotherm increases sharply. A Langmuir fit has been found below the CMC of ENP. From the maximum amounts adsorbed at pseudo-plateau (T_max of the tested samples it was found that the efficiency of adsorption onto the rubber surface decreases in the order, O.P. > O.S. > I.T.     

Mechanism of Electrical Percolation of w/o Microemulsions Formed by Nonionic Surfactants

A study was carried out on the mechanism of electrical conductivity percolation of H₂O/C₁₆EO₂₀/n-butanol/heptane microemulsions. Electrical conductivity, UV-vis spectroscopy and FTIR spectra were used to study the diluted “dry” microemulsions with the mass ratio of C₁₆EO₂₀/n-butanol/heptane = 3:3:4. The results of electrical conductivity showed that the percolation occurred around φ_w = 20 wt% and the transition of w/o microemulsions to bicontinueous microemulsions happened when φ_w = 45 wt%. From the UV-vis absorption spectra, it was found that the absorption of methyl orange (MO) in microemulsions shifted red than that of in oil phase, but the maximal absorption peak (λ_max) remained unchanged when φ_w > 20 wt%. It implied that the position of MO solubilized in microemulsions was unvaried after free water appeared in the core. FTIR spectra revealed that the OH band of water in microemulsions moved to high frequency at low φ_w (< 20 wt%) and became broader at high φ_w. It indicated that the added water only caused the hydration of EO at low φ_w, the hydration completed when φ_w > 20 wt% and then the residual water entered into the core with properties similar to bulk water. The presence of free water as ions exchange medium will cause the electrical conductance increased. The percolation appeared after the hydration of EO completed.     

Effects of Spacer Chain Length and Additives on Solution Properties of Cationic Gemini Surfactant

The critical micelle concentration (CMC) has been determined for the gemini surfactant trimethylene-1,3-bis(dodecyldimethyl ammonium bromide)12-s-12,2Br^?1 by means of electricity conductivity measurements. For the same number of carbon atoms in the hydrophobic chain per hydrophilic head group, geminis have CMC values well below those of conventional single-chain cationic surfactants. The CMC of 12-3-12 reduces with the addition of n-alcohol except ethanol and with the increase of n-alcohol chain length as well as increase of concentration of n-butanol and sodium chloride. Steady-state fluorescence quenching technology has been employed to study the aggregation number of micelle, which increases with increase in the length of n-alcohol. The Kraft temperature measurements also indicate that the stability of solid surfactant hydrate decreases along with the improvement of concentration of n-butanol and sodium chloride.     

Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.     

Synthesis and Properties of Surfactants derived from N‐Acetyl‐D‐Glucosamine

The synthesis of 2‐acetamido‐2‐deoxy‐6‐O‐octanoyl‐D‐glucono‐1,5‐lactone 9 and 2‐acetamido‐2‐deoxy‐6‐O‐octanoyl‐α‐D‐glucopyranose 7 from 2‐acetamido‐2‐deoxy‐α‐D‐glucopyranose is reported. For both targets, the key intermediate was allyl 2‐acetamido‐3,4‐di‐O‐benzyl‐2‐deoxy‐6‐O‐octanoyl‐α‐D‐glucopyranoside 5. Surface tension measurements (critical micellar concentration of 22.3 mM and 5 mM for 9 and 7, respectively) showed up the surface activity of both compounds, while enzyme inhibition assays indicated that 9 could inhibit bovine β‐N‐acetylglucosaminidase (K_i=6.5 µM) but not Serratia marcescens chitobiase nor hen egg‐white lysozyme. Moreover, 7 was shown to induce chitinase production of S. marcescens and to be readily metabolized by these bacteria.      

悬浮聚合制备大尺寸梭形聚苯乙烯粒子新方法及机理研究

利用氢氧化钾对苯乙烯-马来酸酐交替共聚物(SMA)进行水解,所得中等皂化程度的SMA水解产物(SMAA)在水溶液中具有刚性棒状直链构型;将此特殊结构的大分子作为分散剂用于苯乙烯悬浮聚合,通过控制搅拌速度和油水比,可得到梭形聚苯乙烯粒子;在优化条件下,粒子平均长度6.8 mm,宽度1.4 mm,厚度0.5 mm,长径比约5.0.其可能的机理为,中等皂化程度的刚棒直链型SMAA在聚合物"软粒子"表面能形成难以"回复"的有效保护层,使由剪切形成的变形聚合物"软粒子"在聚合过程中能保持形状和尺寸的稳定,从而得到梭形聚合物粒子.     

阿拉伯树胶对Gemini表面活性剂界面扩张流变性质的影响

利用悬挂滴方法研究了Gemini季铵盐表面活性剂(C₁₂-Ph-C₁₂和C₁₂-8-C₁₂)和阿拉伯树胶的界面张力和界面扩张流变性质, 考察了阿拉伯树胶对C₁₂-Ph-C₁₂和C₁₂-8-C₁₂溶液界面张力和界面扩张流变性质的影响. 研究结果表明, 1%(w)阿拉伯树胶的加入显著降低了C₁₂-Ph-C₁₂和C₁₂-8-C₁₂的界面张力, 但是界面扩张模量增加,这一变化主要是由于阿拉伯树胶分子与Gemini季铵盐表面活性剂分子通过静电相互作用形成复合物. 文中提出了不同结构Gemini季铵盐表面活性剂与阿拉伯树胶分子在界面排布的示意图.     

Synthesis of sugar oxime ether surfactants

A straightforward synthesis of a novel class of sugar surfactants is described. The key step is the chemoselective condensation of a hydrophobic alkoxyamine with the resident aldehyde/ketone moiety on a hydrophilic sugar. Neither protection/deprotection of the sugars nor extensive product purification is required. The method allows for the facile adjustment of hydrophobic and hydrophilic domains of the sugar oxime ether surfactant and uses inexpensive, readily accessible, and renewable materials.     

Effect of Experimental Variables on the Combustion Characteristics of Water-in-Diesel Emulsion Fuels

Water-in-diesel (W/D) emulsion fuels were prepared through an ultrasonic processor by using high energy emulsification method. Accordingly, the physical and chemical properties were analyzed. A decrease in viscosity was found in the emulsion fuel in contrast to the neat diesel which signifies the enhanced fluidity of the fuel. The emulsion fuel was then used to carry combustion tests in an internal combustion engine. A decrease in exhaust temperature was observed when a high surfactant to water ratio was used, which lead to minimal heat loss. As water is emulsified with diesel, effectiveness of combustion is improved rather than neat diesel fuel. It was also explored that the addition of water-in-diesel is influential in terms of reduction in exhaust gas emission such as carbon dioxide, carbon monoxide, ammonia from the internal combustion engine. Therefore, this type of emulsion fuel would be a useful contribution in the fuel economy, but also in making it environmentally friendly since diesel fuel is now considered one of the leading fuels causing ecological contamination.