A New Trial Equation Method and Its Applications

As an improved version of trial equation method, a new trial equation method is proposed. Using this method, abundant new exact traveling wave solutions to a high-order KdV-type equation are obtained.     

DMF体系中Cu2O球晶的制备及形貌分析

以N,N-二甲基甲酰胺(DMF)为溶剂,通过改变铜源和表面活性剂,调控反应参数,溶剂热条件下制备了三维十字形、空心及实心的Cu₂O球晶。利用XRD、SEM等表征手段,分析探讨了工艺条件变化对Cu₂O球晶形貌的影响。研究表明,随着DMF浓度的增大,体系的还原能力增强,Cu⁺增多,溶液的过饱和度增大,Cu₂O晶体集合体形态由晶体结构控制的各向异性与对称性的球晶逐渐向各向同性球晶演变。十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、聚乙烯吡咯烷酮(PVP)等表面活性剂有助于降低溶液的过饱和度,增加结晶质的表面扩散能力,有利于规则形态Cu₂O晶粒的形成。反应体系中,Cu(Ac)₂·H₂O水解生成的羧基与DMF中的甲酰基在高温下发生脱羧反应产生CO₂气体以及SDS发泡作用产生的气体是形成空心Cu₂O球晶的重要原因。     

用化学溶液方法在Ni-5at%W基底上制备La2Zr2O7过渡层的研究

La2Zr2O7(LZO)过渡层以其独特的物理化学性质越来越受到人们的关注。本文以乙酰丙酮镧和乙酰丙酮锆为前驱盐,丙酸为溶剂配置前驱液,用化学溶液方法(CSD)在具有立方织构的Ni-5at%W基底上制备了LZO过渡层薄膜。研究了前驱液成分、性质以及退火温度对LZO成相以及取向的影响。用常规XRD和X射线四环衍射仪分析了LZO薄膜的相成分和织构。结果显示,在1050℃下退火可以获得强立方织构的LZO薄膜,其中(222)峰的Phi扫描半高宽值为8.95°;(400)峰的Chi扫描半高宽值为6.8°。用高分辨扫描电子显微镜(FE-SEM)观察到LZO薄膜表面均匀致密,没有裂纹和空洞。     

TRANSIENT TORSIONAL WAVE IN FINITE HOLLOW CYLINDER WITH INITIAL AXIAL STRESS

An analytical solution is obtained for transient torsional vibration of a finite hollow cylinder with initial axial stress. The cylinder is subjected to dynamic shearing stress at the internal surface and is fixed at the external surface. The basic equations are presented and the solution is obtained by means of Fourier series expansion technique and the separation of variables method. The effects of the initial stress on the natural frequencies and transient torsional responses are presented and discussed.     

Non-Invasive Detection of Anti-Inflammatory Bioactivity and Key Chemical Indicators of the Commercial Lanqin Oral Solution by Near Infrared Spectroscopy

Quality control methods of current traditional Chinese medicine (TCM) preparation is time-consuming and difficult to assess in terms of overall efficiency of the drug. A non-destructive rapid near-infrared spectroscopy detection system for key chemical components and biological activity of Lanqin oral solution (LOS), one of the best-selling TCM formulations, was established for comprehensive quality evaluation. Near infrared spectral scanning was carried out on 101 batches of commercial LOS under the penetrated vial state and traditional state. RAW 264.7 cells were cultured to detect the anti-inflammatory ability of LOS, and the reference concentrations of epigoitrin, geniposide, and baicalin were obtained by HPLC. The quantitative models were optimized by three kinds of variable selection methods. The correlation coefficients of prediction value of the models were greater than 0.94. The system also passed the external validation. The performance of the non-invasive models was similar to the traditional models. The established non-destructive system can be applied to the rapid quality inspection of LOS to avoid unqualified drugs from entering the market and ensure drug effectiveness. The biological activity index of LOS was introduced and predicted by NIRs for the first time, which provides a new idea about the quality control of TCM formulations.     

Synthesis of two dihydropyrroloindoledione‐based copolymers for organic electronics

Two novel dihydropyrroloindoledione (DPID)‐based copolymers have been synthesized in a two directional approach and characterized (gel permeation chromatography (GPC), ultraviolet‐visible (UV–vis), cyclic voltammetry, and computational models). These planar, broad absorption copolymers show promise for use in organic electronics, with deep energy levels and low bandgaps. The two‐directional Knoevenagel condensation used demonstrates the versatility of DPID as a useful yet underexploited conjugated unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Characterizing polymer macrostructures by identifying and locating microstructures along their chains with the kerr effect

In this brief report, we demonstrate that Kerr effect measurements, which determine the excess birefringence contributed by polymer solutes in dilute solutions observed under a strong electric field, are highly sensitive to and capable of determining their microstructures, as well as their locations along the macromolecular backbone. Specifically, using atactic triblock copolymers with the same overall composition of styrene (S) and p-bromostyrene (pBrS) units, but with two different block arrangements, that is, pBrS₉₀-b-S₁₂₀-b-pBrS₉₀ (I) and S₆₀-b-pBrS₁₈₀-b-S₆₀ (II), which are indistinguishable by NMR, we detected a dramatic difference in their molar Kerr constants (_mK), in agreement with those previously estimated. Although similar in magnitude, their Kerr constants differ in sign, with _mK(II) positive and _mK(I) negative. In addition, S/pBrS random and gradient copolymers synthesized by reversible addition-fragmentation chain-transfer (RAFT) polymerization exhibit a heretofore unexpected enhanced enchainment of racemic (r) pBrS-pBrS diads. Comparison of their observed and calculated _mKs suggests that the gradient S/pBrS copolymers possess an unanticipated additional gradient in stereosequence that parallels their comonomer gradient, that is, as the concentration of pBrs units decreases from one end of the copolymer chain to the other, so does the content of r diads. This conclusion could only be reached by comparison of observed and calculated Kerr effects, which access the global properties of macromolecules, and not NMR, which is only sensitive to local polymer structural environments, but not to their locations on the copolymer chains. Molar Kerr constants are characteristic of entire polymer chains and are highly sensitive to their constituent microstructures and their distribution along the chain. They may be used to both identify constituent microstructures and locate them along the polymer chain, thereby enabling, for the first time, characterization of their complete macrostructures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Thermally induced fixed diradical generation on solid supports for surface‐initiated polymerization

A method is presented for generation of all surface‐bound radicals on solid polymer surfaces. Thus, secondary amide group of newly synthesized crosslinking comonomer, methacryloyloxyethyl methacrylamide was determined as versatile precursor for generation fixed diradicals on solid microspheres, obtained by copolymerization with methyl methacrylate (MMA) in aqueous suspension. Nitrosoation of the secondary amide groups on the microbeads and followed thermolysis above 90 °C was demonstrated to give surface‐bound radicals, capable of initiating polymerization of vinyl monomers, such as; styrene, MMA, N‐vinyl formamide, and N‐vinyl, 2‐pyrrolidone, as evidenced by H NMR, Fourier transform infrared, thermogravimetric analysis, and differential scanning calorimeter techniques. Appreciable grafting yields (55.1%–286.1%) and low free‐homopolymer formation (7.2%–19.7%) were noted within 6 h of the grafting at 100 °C in each case. This strategy involving the use of amide functional crosslinker seemed to be generally applicable to generate surface‐bound radicals for surface‐initiated polymerization from various solid substrates. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tuning the sugar‐response of boronic acid block copolymers

A detailed study of the pH‐ and sugar‐responsive behavior of poly(3‐acrylamidophenylboronic acid pinacol ester)‐b‐poly(N,N‐dimethylacrylamide) (PAPBAE‐b‐PDMA) block copolymers is presented. Reversible addition‐fragmentation chain transfer (RAFT) polymerization of the pinacol ester of 3‐acrylamidophenylboronic acid resulted in homopolymers with molecular weights between 12,000 and 37,000 g/mol. The resulting homopolymers were employed as macro‐chain transfer agents during the polymerization of N,N‐dimethylacrylamide (DMA). Successful chain extension and removal of the pinacol protecting groups to yield poly(3‐acrylamidophenylboronic acid)‐b‐PDMA (PAPBA‐b‐PDMA) with free boronic acid moieties resulted in pH‐ and sugar‐responsive block copolymers that were subsequently investigated for their behavior in aqueous solution. The PAPBA‐b‐PDMA block copolymers were capable of solution self‐assembly due to the PAPBA block being water‐insoluble below its pK_a. The resulting aggregates were demonstrated to solubilize and release model hydrophobic compounds, as demonstrated by fluorescence studies. Dissociation of the aggregates was induced by raising the pH above the pK_a of the boronic acid residues or by adding sugars capable of forming boronate esters. Aggregate size, dissociation kinetics, and the effect of various sugars were considered. The critical sugar concentration needed to induce aggregate dissociation was tuned by incorporation of hydrophilic DMA units within the PAPBA responsive segment to yield PDMA‐b‐poly(3‐acrylamidophenylboronic acid‐co‐DMA) block copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.