Adsorptive Voltammetry of Polyelectrolyte Complex Between 11‐Ferrocenyltrimethylundecylammonium and Polyanions at Carbon Paste Electrode

For polyelectrolyte complex between cationic surfactant and polyanion, the adsorptive voltammetry at carbon paste electrode using an electroactive cationic surfactant was examined. The adsorption state of the cationic surfactant in the complexes at CPE was estimated from the half‐height width of the oxidation waves. The half‐height width for poly(styrene sulfonate) was independent of the molecular weight, and was same as that for poly(vinyl sulfate). The half‐height width for heparin was broad and different from that of the vinyl polyanions. According to the analysis by Frumkin isotherm, the interaction between cationic surfactants was attractive in heparin complex at CPE, however, in the vinyl polyanion complexes at CPE the interaction was non‐cooperative as that predicted with the Langmuir isotherm. In spite of the same adsorption state, the concentration dependency of the peak current for poly(styrene sulfonate) was quite different from that for poly(vinyl sulfate). The concentration dependence indicated the reactive property of each polyanion on the association with the cationic surfactant in aqueous solution.     

Electrochemical Reduction of Monochlorinated Hydrocarbons at a Hydrophobic Zn/PTFE Composite‐Electroplated Zn Electrode in a Water‐Acetonitrile Mixture

Composite‐electroplating of zinc particles with polytetrafluoroethylene at a zinc substrate resulted in a working electrode which could be used at high negative potentials (to ?2.5 V vs. Ag/AgCl) without significant hydrogen evolution. The electrodes were characterized by SEM and CV and were used to detect organochloride compounds in a water‐acetonitrile mixture, by potential step methods.     

Transference numbers for ultra concentrated solutions of aqueous hydrochloric acid at 25°C

Transference numbers of HCl(aq) solutions at 25°C, from 0.01 to 13.6 mol-kg^–1(m) have been obtained by measuring the emf of cells with transference using hydrogen gas/platinum electrodes. Good agreement is obtained at concentrations up to 1 m with all previous data, and our results strongly corroborate those of King and Spiro over the 2–8m concentration range. The transference numbers of the hydronium ion fit the empirical equation, _H ^HCl = 0.821 + 0.0457m ^1/2 – 2.476×10^–2m – 1.90×10^–4 m ² – 1.45×10^–5 m ³ the maximum deviation in T _H ^HCl being 0.003.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Electrochemical Study of the Interactions of DNA with Redox‐Active Molecules Based on the Immobilization of dsDNA on the Sol‐Gel Derived Nano Porous Hydroxyapatite‐Polyvinyl Alcohol Hybrid Material Coating

A novel type of sol‐gel inorganic‐organic hybrid material coated on glassy carbon electrode used for immobilization of double‐stranded DNA (dsDNA) and study of dsDNA with redox‐active molecules was developed. The hybrid material coating was produced by sol‐gel method with nano hydroxyapatite (HAp)‐polyvinyl alcohol (PVA). The optimum composition of the hybrid material was first examined, and the morphology of the nano HAp‐PVA coatings was investigated with the help of Scanning Electron Microscope (SEM). DsDNA was immobilized in/on the nano HAp‐PVA hybrid coatings by adsorption and the characteristics of the dsDNA/HAp‐PVA/GCE were studied by cyclic voltammetry (CV) using the probes of Co(phen) and Fe(CN) . The results indicate that the dsDNA can be immobilized on the nano porous HAp‐PVA coating effectively and its stability can satisfy the necessity of study on the interactions of dsDNA with redox‐active molecules on the electrode surface. Co(bpy) and Co(phen) were used as the model molecule to study the interactions of dsDNA with redox‐active molecules. Information such as ratio (K_Ox/K_Red) of the binding constant for the oxidized and reduced forms of a bound species, interaction mode, including change in the mode of interaction, and “limiting” ratio K /K at zero ionic strength (μ) can be obtained using dsDNA/HAp‐PVA/GCE with about 2 μg of DNA samples.     

Electrocatalytic Reduction of Chromium(VI) by Thionin: Electrochemical Properties and Mechanistic Study

The electrochemical properties of aqueous thionin (an electroactive water soluble dye) of pH 1–12 were investigated by cyclic voltammetry at a boron doped diamond(BDD) electrode. A well defined reversible redox couple was observed in acidic, neutral and alkaline solutions. The standard potential and kinetic parameters for thionin were obtained by fitting experimental cyclic voltammograms to those generated by the DigiSim program. The electrogenerated reduced form of thionin has been used as an efficient organic catalyst for the reduction of Cr(VI) at a BDD electrode immersed in aqueous media. The cyclic voltammetry measurements indicate that an electrocatalytic process occurs, where electrochemically generated thionin reduced species (Leucothionin) is oxidized by Cr(VI) back to the parent thionin species via a EC' reaction mechanism. The determination of catalytic rate constant (K_cat) was accomplished again by fitting experimental cyclic voltammograms with simulated ones.     

Element-selective detection using capillary gas chromatography with atomic emission detection

Capillary GC coupled to an atomic emission detector (AED) provides a powerful new hyphenated technique for the separation and characterization of complex mixtures and compounds. The AED provides simultaneous and truly specific multi-element detection. The specificity of detection reduces the need for the complex sample pretreatment procedures which are necessary to reduce the interference from co-eluted substances which is experienced with detectors such as the FID and the ECD. A range of environmentally significant problems has been studied, including PCB analysis, the characterization of the reaction products of a novel waste treatment process, and the profiling of sulfur-containing species formed by the pyrolysis of various types of coal.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Polypyrrole Bilayers: Charge Trapping and Application for Amperometric Ions Sensing

Bilayers composed of polypyrrole: doped by perchlorate ions (PPy(ClO₄) – anion exchanging inner layer) and by dodecyl sulfate ions (PPy(DS) – cation exchanging outer layer) are very effective charge trapping systems that are usually not observed for other bilayers comprised of polypyrrole. Chronopotentiometric experiments carried out for oxidation and reduction showed that the trapping effect in the inner layer resulted from different ion exchange properties of the component polymers, leading to a low permeability of the reduced outer layer towards anions. Estimated diffusion coefficients of Cl^? anions in the oxidized and reduced PPy(DS) are in the range of 10^?9 and lower than 10^?10 cm² s^?1, respectively. The presence of the outer layer limiting the ion transfer was found to be beneficial to improve the signal resolution in amperometric mode of ion sensing within wide KCl concentration range, from 10^?5 M up to 3 M. The influence of experimental conditions (film thickness, response time) on optimization of this novel kind of polymeric bilayer ion sensors was studied.     

基于模糊理论的空间屏蔽滤波信号去噪

基于模糊理论提出了一种空间屏蔽滤波信号去噪方法.对信号进行二进小波变换后,对信号进行空间屏蔽滤波,对于未通过滤波器的系数进行模糊阈值处理实现去噪.通过对含噪HeaviSine和Doppler信号的去噪仿真,表明,该方法对噪音具有良好的抑制作用,能较好地保持信号在间断点处的信息.与传统空间屏蔽滤波相比,该方法对不同种类的含噪信号均具有良好的去噪效果.