Ferrocenyl and permethylferrocenyl cyclic and polyhedral siloxane polymers as mediators in amperometric biosensors

Cyclosiloxane and silsesquioxane-based ferrocenyl and permethylferrocenyl polymers have been used as mediators in amperometric enzyme electrodes for the detection of glucose. Biosensors have been prepared by electrostatically immobilizing the enzyme glucose oxidase (GOx) on electrodes modified with the polymers. The steady-state amperometric response of the sensors is investigated as a function of the applied potential and substrate concentration. The dependence of the sensors response on the structure of the siloxane-framework and on the presence or not of methyl groups on the ferrocenyl units is discussed.     

Studies of the electrochemical behavior of epinephrine at a homocysteine self-assembled electrode

The self-assembled electrode with the homocysteine monolayer (Hcy/Au) has been characterized by infrared spectroscopy and ac impedance spectroscopy in electrolyte. The Hcy/Au electrode is demonstrated to promote the electrochemical response of epinephrine (E) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k_s) is 2.1×10⁻² cm s⁻¹ at the self-assembled electrode. The reduction peak of E can be used to determine the concentration of E in presence of ascorbic acid (AA) owing to the Hcy/Au also promoting the electrochemical oxidation of AA.     

Potentiometric determination of fluoride in geological and biological samples following pyrohydrolytic decomposition

A method for the determination of fluoride in coal, coal fly ash, phosphate rock, limestone, mineral clay, fossilised materials, oyster tissue and vegetation using pyrohydrolysis for sample decomposition is proposed. A specific apparatus was constructed and the influence of vanadium pentoxide (V₂O₅) as a catalyst for the pyrohydrolysis reaction was investigated. It was verified that V₂O₅ does not influence the release of fluoride from the vegetation, oyster tissue, coal and coal fly ash matrices analysed. However, the catalyst was necessary for the phosphate rock, fossil bone, mineral clay and limestone samples. Certified and noncertified samples were analysed using an ion selective electrode (ISE) for the analyte detection. Precise (relative standard deviation—R.S.D.<7%) and accurate (recovery in accordance to certified values) results were obtained. The limit of quantification (LOQ) of the method was 5.0 μg g⁻¹ of fluoride using 20 mg of sample and a final dilution to 10 ml. The sample frequency was five samples per hour.     

Kinetic parameters of the In(III)/In(I) electrode reaction in bromide medium

The electrode kinetic parameters of the In(III)/In(I) couple in acidic 4M bromide solution have been determined by means of the rotating disc electrode technique.

---

Die elektrochemisch-kinetischen Parameter des In(III)/In(I)-Redoxsystems in Bromidlösung (Kurze Mitteilung)

Zusammenfassung Die elektrochemisch-kinetischen Parameter am In(III)/In(I)-Redoxsystem wurden in saurer 4-M-Bromidlösung mittels der rotierenden Scheibenelektrode bestimmt.

     

Zn(II)-selective membrane electrode based on tetra(2-aminophenyl) porphyrin

A new PVC membrane electrode for Zn²⁺ ions based on tetra(2-aminophenyl) porphyrin (TAPP) as membrane carrier is prepared. The sensor exhibits a linear stable response over a wide concentration range (5.0×10⁻⁵ to 1.0×10⁻¹ M) with a slope of 26.5 mV/decade and a limit of detection 3.0×10⁻⁵ M (1.96 ppm). It has a response time of about l0 s and can be used for at least 8 months without any divergence in potential. The propose membrane sensor revealed good selectivities for Zn²⁺ over a wide variety of other metal ions and can be used in pH range of 3.0–6.0. It was successfully applied to the direct determination of zinc in a pharmaceutical sample and also as an indicator electrode in potentiometric titration of Zn²⁺ ions.     

Formation Thermodynamics of Binary and Ternary Lanthanide(III) Complexes with 1,10-Phenanthroline and Chloride in N,N-Dimethylformamide

Formation thermodynamics of binary and ternary lanthanide(III) (Ln = La, Ce, Nd, Eu, Gd, Dy, Tm, Lu) complexes with 1,10-phenanthroline (phen) and the chloride ion have been studied by titration calorimetry and spectrophotometry in N,N-dimethyl-formamide (DMF) containing 0.2 mol-dm^–3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25°C. In the binary system with 1,10-phenanthroline, the Ln(phen)³⁺ complex is formed for all the lanthanide(III) ions examined. The reaction enthalpy and entropy values for the formation of Ln(phen)³⁺ decrease in the order La > Ce > Nd, then increase in the order Nd < Eu < Gd < Dy, and again decrease in the order Dy > Tm > Lu. The variation is explained in terms of the coordination structure of Ln(phen)³⁺ that changes from eight to seven coordination with decreasing ionic radius of the metal ion. In the ternary Ln³⁺-Cl^–-phen system, the formation of LnCl(phen)²⁺, LnCl₂(phen)⁺, and LnCl₃(phen) was established for cerium(III), neodymium(III), and thulium(III), and their formation constants, enthalpies, and entropies were obtained. The enthalpy and entropy values are also discussed from the structural point of view.     

动力学电位法测定硼

本文根据硼酸，苯乙醇酸，孔雀绿形成三元离子缔合型配合物的反应，用孔雀绿离子选择性电极监测反应速率，在最佳实验条件下，用固定时间法，电位变化与硼量在０．２－５．０μｇ／ｍＬ范围呈线性关系，用於测定标准钢样和玻璃标样中的硼，结果与标准值十分接近。     

Ion-selective electrode for gallium determination in nickel alloy, fly-ash and biological samples

A poly(vinyl chloride)-based membrane of 2,9-dimethyl-4,11-diphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene (DDTCT) with sodium tetraphenyl borate (STB) as an anion excluder and dibutyl phthalate (DBP), dibutyl butylphosphonate (DBBP), tris(2-ethylhexyl) phosphate (TEP) and tributyl phosphate (TBP) as plasticizing solvent mediators was prepared and investigated as a Ga(III)-selective electrode. The best performance was observed with the membrane having the ligand-PVC-DBP-STB composition 1:4:1:1, which worked well over a wide concentration range (1.45 × 10⁻⁶ to 0.1 mol L⁻¹) with a Nernstian slope of 28.7 mV per decade of activity between pH 4.0 and 10.0. This electrode showed a fast response time of 12 s and was used over a period of 100 days with good reproducibility (s = 0.3 mV). The selectivity coefficients for monovalent, divalent and trivalent cations indicate excellent selectivity for Ga(III) ions over a large number of cations. Anions such as Cl⁻ and SO₄²⁻ do not interfere and the electrode also works satisfactorily in partially water-alcohol medium. The practical utility of the membrane sensor has also been observed in solutions contaminated with detergents, i.e., cetyltrimethylammonium bromide and sodium dodecyl sulfate and used for the determination of gallium in nickel alloy, fly-ash and biological samples.     

A Substituted Tetraazaporphyrinogen as an Electroactive Component for a Polymeric Membrane Anion-Selective Electrode

A novel anion-selective electrode has been prepared by usingtetraazaporphyrinogen as the electroactive component and o-nitrophenyloctylether as the plasticizer. The electrode exhibits almost Nernstian responsecharacteristics for Pic^-, ReO ₄ ^- ,SCN^-, ClO ₄ ^- and TPB^-. The linearresponse ranges towards the above-mentioned anions are 10^-6 10^-2, 10^-5 10^-2,10^-5 10^-2, 10^-5 10^-1, and 10^-5 10^-2mol/Land the corresponding slopes are -56.8, -57.1, -56.3, -56.1, and -59.9mV/decade with correlation coefficients of -0.99978, -0.99987, -0.99999,-0.99998, and -0.99998, respectively. The electrode shows an anti-Hofmeisterselectivity sequence: Pic^- > SCN^- >ReO ₄ ^- > ClO ₄ ^- > I^- >Br^- > BF ₄ ^- > Sal^->NO ₃ ^- > Cl^-. The unusual responsemechanism of the novel anion-selective electrode was investigated byexperimental observations and calculation with the MNDO method. Theelectrode was used as a TPB^- and a Pic^-sensitiveelectrode, respectively, and applied to the assay of levamisolehydrochloride tablets by potentiometric titration and Gran's methods. Theresults obtained are in excellent agreement with that determined by thestandard pharmacopoeia method based on nonaqueous titration.     

Analytical study of highly condensed non ionic surfactants. Separation on cation exchangers

Summary This study was aimed at optimizing the separation of non-ionic surfactants, resulting from the condensation of ethylene oxide with natural fatty alcohols in the C₁₆ and C₁₈ range (saturated and unsaturated), and presenting a high degree of condensation, i.e. 20 and 25 ethylene oxide units (Brij 99 and KM 25). The cation exchange stationary phase is a partially ionized silica, conditioned in different ways. We have studied the influence of the nature of cations on the separation selectivity. Cations studied included alkali metals (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), alkaline earth metals (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), transition metals (Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Cu²⁺), and quaternary ammonium (NH ₄ ⁺ , NMe ₄ ⁺ ) ions as well as a proton (acetic acid). The influences of ionic strength, pH and addition of cosolvent were examined. A study of the influence of temperature on the system selectivity evidenced a strong interdependance of these two parameters. The optimized conditions [mobile phase: CH₃CN/H₂O (92/8), pH 7.4, sodium acetate 5.10^–3 M; temperature gradient between 25 and 50°C] allowed for the first time the distributions of Brij 99 and KM 25 to be obtained.