负载金属镧的壳聚糖对氟离子的吸附动力学

利用负载金属镧的壳聚糖对含氟水进行吸附处理.该除氟剂的最佳吸附条件:pH值为7,温度为323K,吸附时间为60min.吸附剂对F的吸附过程符合Langmuir等温线方程,对F的饱和吸附容量为476.190mg/g.吸附动力学符合拟二级速率方程,颗粒内扩散过程和液膜形成的边界层是吸附过程的主要限速步骤.     

DNA／聚（3-甲基噻吩）复合膜修饰电极的制备及其应用于研究8-羟基-2＇-脱氧鸟嘌呤核苷的伏安行为及测定

首先通过电聚合方法在玻碳电极表面制备了聚（3-甲基噻吩）（P3MT）修饰膜,然后在一定电位下将DNA分子电沉积到P3MT表面,制备了DNA／（P3MT）复合膜修饰玻碳电极．研究了8-羟基-2’-脱氧鸟嘌呤核苷（8-OH-dG）在该复合膜修饰电极上的伏安行为以及扫描速度、pH值和尿酸对其伏安行为和检测的影响．实验结果表明,该复合膜修饰电极结合了P3MT和DNA两者的优点,使8-OH-dG在复合膜修饰电极上的电化学行为明显改善,而且具有很好的重现性和稳定性．在0．1mol／LpH7．0的磷酸盐缓冲溶液（PBS）中,8-OH-dG的氧化峰电流与其浓度在0．28～4．2μmol／L和4．2～19．6μmol／L两个范围内成良好的线性关系,检出限为56nmol／L（S／N=3）．该研究可以为制备HPLC或毛细管电泳电化学检测器检测8-OH—dG打下一定的基础,因此在检测尿样中8-OH-dG的研究方面具有潜在的应用价值．     

A Microbial Sensor Based on Direct Electron Transfer at Shewanella Sp. Drop‐Coated Screen‐Printed Carbon Electrodes

Aerobically grown Shewanella sp. bacterial suspension drop‐coated on a disposable screen‐printed carbon electrode was found to possess electroactivity without the aid of redox mediator. Cyclic voltammetric studies revealed the characteristics of a mixed diffusion adsorption‐controlled electrochemical process for direct electron transfer at the bacteria‐modified electrode. Both FE‐SEM and ATR FT‐IR experiments were carried out to investigate the surface characteristics. The electroanalytical applicability was further demonstrated for electrocatalytic reduction of arsenite, hydrogen peroxide and nitrite. Low cost and very simple manufacturing procedure allow for the proposed bacterial sensor to be applied as disposable devices.     

邻苯二酚在活化玻碳电极上的电化学行为

邻苯二酚( QH2,儿茶酚)等有机化合物是人体内的电活性物质,直接参与人体内的各种生理过程.     

Acetylcholinesterase biosensor based on single-walled carbon nanotubes--Co phtalocyanine for organophosphorus pesticides detection

A simple and reliable technique has been developed for the construction of an amperometric acetylcholinesterase biosensor based on screen-printed carbon electrodes. For the first time, one-step modification using single-walled carbon nanotubes and Co phtalocyanine has been proposed to decrease the working potential and to increase the signal of thiocholine oxidation. The biosensor developed made it possible to detect 5-50 ppb of paraoxon and 2-50 ppb of malaoxon with detection limits of 3 and 2 ppb, respectively (incubation 15 min). The biosensor showed high reproducibility when measurements of the substrate and inhibitor were performed (R.S.D. about 1% and 2.5%, respectively). The reliability of the inhibition measurements was confirmed by testing spiked samples of sparkling and tape waters.     

镁铝复合氧化物负载铜催化剂上甘油选择性氢解合成丙二醇

我们通过乙醇溶液浸渍法合成出了具有高分散度金属Cu 的Cu/MgO-Al₂O₃ (Mg/Al 原子比=1/1, 3/1, 4/1)、Cu/MgO 和Cu/Al₂O₃ 等催化剂. 在200℃, 6.0 MPa H₂ 和二氧六环溶剂中, 这些催化剂高选择性地将甘油氢解为1,2-丙二醇(选择性>90%), 而单位表面Cu 原子的甘油转化速率则随催化剂表面碱中心与Cu 原子比例的提高而增大. N₂O 化学吸附-H₂ 程序升温还原实验表明Cu 粒子的本征氢解能力不随其负载量以及载体中的Mg/Al 原子比发生明显改变, 加之碱性MgO-Al₂O₃ 载体本身不催化甘油的转化, 我们推测在甘油氢解反应中金属Cu 粒子与载体界面处的碱中心辅助Cu 粒子活化甘油分子的α 位C-H键, 从而加速甘油脱氢为甘油醛步骤以及甘油氢解反应的进行. CO₂程序升温脱附实验以及对甘油氢解反应中Cu/MgO-Al₂O₃ 催化剂稳定性的考察结果暗示在甘油氢解反应中起主要作用的碱中心是载体表面上与Mg²⁺键连的羟基基团(即B 碱OH^-). 这些对甘油氢解反应中金属中心与碱性中心协同作用的认识对进一步理性设计高效的甘油或其它多元醇分子氢解催化剂具有重要指导意义.     

Syntheses,Structures and Properties of Lanthanide Coordination Polymers Constructed from Mixed Acid

Two new coordination polymers,[Ln(oba)(ox)0.5(H2O)2]n(Ln = Ho(1),Eu(2);H2oba = 4,4?-oxybis(benzoic acid),H2ox = oxalic acid) have been synthesized under hydrothermal conditions.According to single-crystal X-ray diffraction analyses,complex 1 crystallizes in the monoclinic system,space group P21/c with a = 13.783(2),b =10.0120(15),c = 12.1974(18) ,β = 105.217(2)°,V = 1624.2(4) 3,C15H12O9Ho,Mr = 501.18,Z = 4,Dc = 2.050 g/cm3,F(000) = 964,μ = 4.919 mm-1,λ(MoKα) = 0.71073 ?,GOOF = 1.124,the final R = 0.0239 and wR = 0.0570 for 3310 independent reflections with Rint = 0.0298.Complexes 2 and 1 are isostructural.Oba and ox ligands bridge the Ln(III) ions into 2D layers with(4,4) topology,which are further interlinked into a 3D supramolecular network by hydrogen bonds.TG curves of the two complexes are studied to examine their thermal stabilities.Additionally,complex 2 shows red fluorescence in the solid state at room temperature.     

丝网印刷法制备高催化活性对电极

对电极在染料敏化太阳能电池（DSCs）中主要起催化氧化还原反应及收集电荷的作用,铂对电极常用的制备方法为磁控溅射法,但其成本较高,制备条件苛刻. 本文通过引入低成本的表面活性剂Span-85,所制得的铂对电极的附着力、透光率和均匀性显著改善,实现了面积可控,与两步浸泡法和旋涂热解法制备的对电极在DSCs中的光电转换效率分别为7.30%,6.96%和7.03%. 紫外-可见吸收光谱、扫描电镜和附着力测试等结果表明,（1）添加表面活性剂有利于增加附着力及改善透光率和均匀性;（2）使用该法制备的Pt/FTO对电极的透光率与两步浸泡法制作的相同,且铂粒子分布更加均匀. 电化学阻抗图谱、塔菲尔极化曲线和循环伏安曲线结果表明,丝网印刷方法制备的Pt/FTO对电极具有更加优异的催化性能,且该法更有利于降低其生产成本和大规模生产.     

Improved Calcium Ion-Selective Electrode Based on a Neutral Carrier

Abstract

The performance of a liquid-membrane electrode using a synthetic, neutral carrier in o-nitro-phenyl-n-octyl-ether as membrane component in a PVC matrix, in the presence of sodium tetra-phenyl-borate, is described. Selectivities, working range, lifetime and anion interference are discussed. The electrode makes possible the measurement of calcium ion activities in the range 10^?1M to 10^?6M in unbuffered and in the range 10^?1M to 10^?8M in calcium buffered systems respectively. The selectivities of calcium over protons, magnesium, sodium and zinc are 25,000, 26,000, 2,800 and 7,100, respectively, and are far superior than those reported for other calcium sensors.     

Urea-based polyacetylenes as an optical sensor for fluoride ions

Novel acetylenes carrying urea groups, 1-(4-ethynylphenyl)-3-(4-nitrophenyl) urea (1), 1-(4-propargyl)-3-(4-nitrophenyl) urea (2), were synthesized and polymerized with rhodium catalyst. Polymers [poly(1) and poly(2)] with moderate molecular weights were obtained in good yields. The anion sensing ability of poly(1) and poly(2) was estimated using the tetra-n-butylammonium (TBA) salts of a series of anions in DMF. Upon the addition of F-, the color of the DMF solution of poly(1) and poly(2) immediately turned to a different color, while the color of solution changed slightly upon addition of Cl-, HSO4-, Br-, and NO3-, indicating the F- sensing ability of poly(1) and poly(2). The 1H-NMR titrations of poly(1) revealed that the colorimetric response of poly(1) was triggered by the urea/F- interaction through the hydrogen bonding and/or deprotonation process. The absorption spectra titration and Hill plot analysis were carried out to measure the F- binding ability, and the Hill coefficient in the poly(1)/F- complexation was found to be 5.8. This result clearly indicated that this binding mode between poly(1) and F- was based on a positive homotropic allosterism.