给定寿命下的焊趾疲劳裂纹深度尺寸分析

本文提供并用统计方法研究了焊趾疲劳裂纹扩展的Ｎ～α曲线族，给出了联系给定裂纹尺寸下的疲劳分布，给定疲劳寿命下的裂纹尺寸分布以及随机初始条件的概率相容条件。研究表明，给定寿命下的焊趾疲劳裂纹深度尺寸α服从分布Ф［（μ（ａ）－ｌｏｇＮ）／σ（ａ）］。     

Frequency and development of slugs in a horizontal pipe at large liquid flows

The generation of slugs was studied for air–water flow in horizontal 0.0763 m and 0.095 m pipes. The emphasis was on high liquid rates (u_LS ? 0.5 m/s) for which slugs are formed close to the entry and the time intervals between slugs are stochastic. A “fully developed” slug flow is defined as consisting of slugs with different sizes interspersed in a stratified flow with a height slightly larger than the height, h₀, needed for a slug to be stable. Properties of this “fully developed” pattern are discussed. A correlation for the frequency of slugging is suggested, which describes our data as well as the data from other laboratories for a wide range of conditions. The possibility is explored that there is a further increase of slug length beyond the “fully developed” condition because slugs slowly overtake one another.     

Porous polycrystals built up by uniformly and axisymmetrically oriented needles: homogenization of elastic propertiesPolycristaux poreux constitués d'aiguilles orientées de façon uniforme ou axisymétrique : homogénéisation des propriétés élastiques

Porous polycrystal-type microstructures built up of needle-like platelets or sheets are characteristic for a number of biological and man-made materials. Herein, we consider (i) uniform, (ii) axisymmetrical orientation distribution of linear elastic, isotropic as well as anisotropic needles. Axisymmetrical needle orientation requires derivation of the Hill tensor for arbitrarily oriented ellipsoidal inclusions with one axis tending towards infinity, embedded in a transversely isotropic matrix; therefore, Laws' integral expression of the Hill tensor is evaluated employing the theory of rational functions. For a porosity lower 0.4, the elastic properties of the polycrystal with uniformly oriented needles are quasi-identical to those of a polycrystal with solid spheres. However, as opposed to the sphere-based model, the needle-based model does not predict a percolation threshold. As regards axisymmetrical orientation distribution of needles, two effects are remarkable: Firstly, the sharper the cone of orientations the higher the anisotropy of the polycrystal. Secondly, for a given cone, the anisotropy increases with the porosity. Estimates for the polycrystal stiffness are hardly influenced by the anisotropy of the bone mineral needles. Our results also confirm the very high degree of orientation randomness of crystals building up mineral foams in bone tissues. To cite this article: A. Fritsch et al., C. R. Mecanique 334 (2006).     

大跨度脊谷式膜屋盖风载分布的实验研究

基于台州某风雨操场脊谷式张拉膜屋盖缩尺模型风洞试验的数据结果,选取典型测点,研究了屋面迎风前缘、过渡区及中轴区的平均风压和脉动风压系数的分布特性。同时,鉴于屋盖的不规则曲面造型,表面风压梯度变化较大,采用单一体型系数反映屋面风载已不能满足要求。文中在结合屋盖自身复杂体型和风压分布特征基础上,按各榀各边片将屋面划分为不同区域,对5个不利风向角下的区域体型系数进行统计分析,并给出各区域体型系数建议取值。最后,针对这类体型屋盖特点和风压分布特性,得出一些结论和建议,为进一步研究该类屋盖的风荷载特性和结构抗风设计提供了依据。     

STATISTIC MODELING OF THE CREEP BEHAVIOR OF METAL MATRIX COMPOSITES BASED ON FINITE ELEMENT ANALYSIS

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｃｒｅｅｐｂｅｈａｖｉｏｒｏｆｓｈｏｒｔｆｉｂｅｒｒｅｉｎｆｏｒｃｅＭｅｔａｌＭａｔｒｉｘＣｏｍｐｏｓｉｔｅｓ (ＭＭＣｓ)ｄｅｐｅｎｄｓｏｎｔｈｅｆｏｌｌｏｗｉｎｇｆａｃｔｏｒｓ,ｓｕｃｈａｓｔｈｅｃｒｅｅｐｐｒｏｐｅｒｔｙｏｆｔｈｅｍａｔｒｉｘ ,ｅｌａｓｔｉｃａｎｄｆｒａｃｔｕｒｅｓｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｆｉｂｅｒ,ｇｅｏｍｅｔｒｉｃｐａｒａｍｅｔｅｒｓｏｆｔｈｅｆｉｂｅｒｓ,ａｒｒａｎｇｅｍｅｎｔｏｆｔｈｅｆｉｂｅｒｓａｎｄｔｈｅｐｒｏｐｅｒｔｙｏｆｔｈｅｆ…     

颗粒增强复合材料的椭圆形刚性夹杂呈双周期分布模型的反平面问题研究

在遵循复合材料中各夹杂相互影响的重要条件下，构造呈双周期分布且相互影响的椭圆形刚性夹杂模型的复应力函数，采用坐标变换和复变函数的依次保角映射方法，达到满足各个夹杂的边界条件，利用围线积分将求解方程化为线性代数方程，推导出了在无穷远双向均匀剪切，椭圆形刚性夹杂呈双周期分布的界面应力解析表达式，最后的算例分析给出了夹杂的形状对界面应力最大值(应力集中系数)的影响规律，并描绘出了曲线。     

层板复合材料的疲劳剩余刚度统计分布模型

在分析现有关于层板复合材料疲劳剩余刚度衰退模型的基础上，根据层板复合材料在疲劳载荷作用下刚度衰退变化的现象，研究了疲劳载荷对层板复合材料刚度衰退的影响，建立了一个新的、更为合理的用于描述层板复合材料在常幅疲劳载荷作用下的刚度衰退模型，导出了剩余刚度统计分布的表达式，给出了确定模型参数的方法。为验证该模型，设计了几组测试实验，并利用试验结果对模型参数进行了估计。利用该统计分布模型，可以预报层板复合材料在给定应力水平的疲劳载荷作用下循环指定周次时剩余刚度的统计分布。实验数据表明，理论预报和实验结果符合得是很好的。     

Effective Permeabilities in a Porous Medium with Log-Stable Statistics

Equations for the effective coefficients of random permeability fields for fluid flow through a porous medium with log-stable distributions are derived using the Wilson renormalization group approach. Results of the theoretical modeling are compared with data of numerical modeling. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 6, pp. 146–158, November–December, 2005.     

Characterizing texture in polycrystalline materials by ultrasonic waves

A method for characterizing texture from measurements of ultrasonic wave velocities is proposed. In polycrystalline aggregates, ultrasonic wave velocities are strongly affected by orientation distribution coefficients (ODCs), which are usually used to describe the degree of preferred grain orientation in textured materials. In this work, velocities of longitudinal and transverse waves propagating into aluminum alloy 6061 were measured under pure shear, simple shear and uniaxial tension. From the measured ultrasonic wave velocities, the ODCs W₄₀₀ and W₄₂₀ were calculated to infer the deformation-induced texture. The predicted pole figures, obtained using ultrasonic velocities, were in good qualitative agreement with the finite element polycrystal model analyzed pole figures.     

紊动流场中悬浮颗粒分布的随机理论

通过分析固体颗粒在紊动流场中的随机运动,建立了二维流场中垂直于时均流动的方向上颗粒随机位移的概率密度分布函数所满足的方程。由该方程解出的分布函数在一定条件下即相当于颗粒浓度分布函数。运用这一方法研究了[1]、[2]中报道的壁面附近颗粒浓度降低的现象。