橡胶硫化促进剂DZ合成工艺探讨

采用两步合成法制备橡胶硫化促进剂ＤＺ（Ｎ，Ｎ－二环己胺－２－苯并噻唑次磺酰胺），控制Ｍ钠盐与氯代二环乙胺的摩尔比为１，选择乙醇作有机溶剂，将缩合反应滴加Ｍ钠盐的温度控制在３０－３５℃，即可制得熔点在９０℃以上，溶程小于１℃，且收率近８０％的高品质ＤＺ产品。     

Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications

Branched sulfonated poly(ether ketone sulfone)s (Br‐SPEKS) were prepared with bisphenol A, bis(4‐fluorophenyl)sulfone, 3,3′‐disodiumsulfonyl‐4,4′‐difluorobenzophenone, and THPE (1,1,1‐tris‐p‐hydroxyphenylethane), respectively, at 180 °C using potassium carbonate in NMP (N‐methylpyrrolidinone). THPE, as a branching agent, was used with 0.4 mol % of bisphenol A to synthesize branched copolymers. Copolymers containing 10–50 mol % disulfonated units were cast from dimethylsulfoxide solutions to form films. Linear sulfonated poly(ether ketone sulfone)s (SPEKS) were also synthesized without THPE. The films were converted from the salt to acid forms with dilute hydrochloric acid. A series of copolymers were studied by Fourier transform infrared, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. The ion‐exchange capacity (IEC), a measure of proton conductivity, was evaluated. The synthesized Br‐SPEKS and SPEKS membranes exhibit conductivities (25 °C) from 1.04 × 10^?3 to 4.32 × 10^?3 S/cm, water swell from 20.18 to 62.35%, IEC from 0.24 to 0.83 mequiv/g, and methanol diffusion coefficients from 3.2 × 10^?7 to 4.7 × 10^?7 cm²/S at 25 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1792–1799, 2008     

Surface modification of zinc oxide nanorods for potential applications in organic materials

A facile and simple modification method towards changing surface property of ZnO nanorods from a hydrophilic one to a hydrophobic one have been developed by refluxing precursor in three-necked flask. Comparing with the other modifiers discussed in the paper, NDZ-311w titanate coupling agent was selected as the best one not only because of the good lipophilic modification effect, but also for its multifunctional groups could play a crucial part in further composite with organic materials. Moreover, transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), respectively, were used to evaluate the morphology, structure and combinative way before and after surface modification. The TEM result showed, after modifying process, there was a thin layer capping on the surface of ZnO nanorods which could be considered as NDZ-311w titanate coupling agent. Through the structure analysis by XRD, it was found that the surface modification had not substantially altered crystalline structure. Besides, the FT-IR test proved that NDZ-311w titanate coupling agent was rather covalently bonded to the surface of ZnO nanorods than physically capping. More practically speaking, the NDZ-311w titanate coupling agent modified ZnO nanorods have much more potential applications in organic materials than unmodified ones.     

Investigation of Simulated Trading — A multi agent based trading system for optimization purposes

Some years ago, Bachem, Hochstättler, and Malich proposed a heuristic algorithm called Simulated Trading for the optimization of vehicle routing problems. Computational agents place buy-orders and sell-orders for customers to be handled at a virtual financial market, the prices of the orders depending on the costs of inserting the customer in the tour or for his removal. According to a proposed rule set, the financial market creates a buy-and-sell graph for the various orders in the order book, intending to optimize the overall system. Here I present a thorough investigation for the application of this algorithm to the traveling salesman problem.     

Rotational spectra, nuclear quadrupole hyperfine tensors, and conformational structures of the mustard gas simulent 2-chloroethyl ethyl sulfide

Rotational spectra have been recorded for both the ³⁵Cl and ³⁷Cl isotopic forms of two structural conformations of 2-chloroethyl ethyl sulfide (CEES). The rotational constants of the ³⁵Cl and ³⁷Cl isotopomers were used to identify the conformational isomers. A total of 236 hyperfine transitions have been assigned for 47 rotational transitions of the ³⁵Cl isotope of a GGT conformer, and 146 hyperfine have been assigned for 37 rotational transitions of the ³⁷Cl isotopomer. For the second conformer, a total of 128 (110) hyperfine and 30 (28) rotational transitions have also been assigned to the ³⁵Cl (³⁷Cl) isotopes of a TGT conformation. The extensive hyperfine splitting data, measured to high resolution with a compact Fourier transform microwave spectrometer, were used to determine both the diagonal and off-diagonal elements of the ³⁵Cl and ³⁷Cl nuclear quadrupole coupling tensors in the inertial tensor principal axis system. The experimental rotational constant data, as well as the ³⁵Cl and ³⁷Cl nuclear quadrupole coupling tensors, were compared to the results from 27 optimized ab initio (HF/6-311++G^∗∗ and MP2/6-311++G^∗∗) model structures.     

Linear pentablock quintopolymers (l‐SIDMV) with five incompatible blocks: Polystyrene,polyisoprene‐1,4, poly(dimethylsiloxane), poly(tert‐butyl methacrylate), and poly(2‐vinylpyridine)

Three linear pentablock quintopolymers (l‐SIDMV), where S is polystyrene (PS), I polyisoprene‐1,4 (PI), D poly(dimethylsiloxane) (PDMS), M poly(tert‐butyl methacrylate) (PtBuM), and V poly(2‐vinylpyridine) (P2VP), were synthesized by anionic polymerization high vacuum techniques. The approach involves the following: (a) The synthesis of living triblock terpolymer PS‐b‐PI‐b‐PDMSLi and diblock copolymer P2VP‐b‐PtBuMK by sequential polymerizations of the corresponding monomers with sec‐BuLi and benzyl potassium, respectively; and (b) The selective linking of the living triblock terpolymer with the chlorosilane group of 2‐(chloromethylphenyl)ethyldimethylchlorosilane (CMPDMS), followed by linking of the living block copolymer with the remaining chloromethyl group of CMPDMS. Molecular characterization carried out by size exclusion chromatography, membrane osmometry, solution (in CDCl₃ or d₈‐toluene) and solid‐state ¹H‐NMR spectroscopy indicated a high degree of molecular and compositional homogeneity. Differential scanning calorimetry results on the precursors and final polymers were discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3938–3946, 2008     

季铵型阳离子蔗渣纤维素对甘蔗清汁的澄清研究

利用新型的季铵型阳离子蔗渣纤维素作为澄清剂,对甘蔗清汁进行吸附脱色研究.本实验在单因素试验结果的基础上,分别选取纯度提高率和色值降低率作为考查指标,利用SPSS软件进行正交试验的设计和数据分析.通过最佳工艺参数的优化试验,得出如下结论:反应温度为80℃、蔗汁中阳离子蔗渣纤维素复合物的加入量为0.4g/100mL甘蔗清汁、接触时间为40min、pH值8.     

Synthesis of a novel amphiphilic GdPCTA-[12] derivative as a potential micellar MRI contrast agent

A novel amphiphilic contrast agent, a GdPCTA-[12] derivative containing a dodecyl chain as lipophilic moiety, has been prepared. A convergent synthetic route from commercially available diethylene triamine and 3-hydroxypyridine is described. The target amphiphilic gadolinium complex was obtained in nine steps in 22% overall yield. Physicochemical properties and relaxivity measurements of this new contrast agent are described.     

Sonochemical immobilization of silver nanoparticles on porous polypropylene

Silver nanoparticles were immobilized on the surface of polypropylene (PP) porous beads by an ultrasound‐assisted reduction method. The structure and properties of the silver–PP composite were characterized with XRD, TEM, HRSEM, EDX, XPS, and Raman spectroscopy. Water‐soluble polymers such as PEG, PVA, and PVP were used as stabilizing agents for preventing the agglomeration of the silver nanoparticles. With PVP, a homogeneous distribution of silver nanocrystals, 50 nm in size, on the PP surface was achieved. The mechanism proposed for the silver anchoring to the inert polymer accounts for a localized melting of the PP. The beads of the silver PP composite demonstrated good stability and high antibacterial activity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1719–1729, 2008     

Viscoelastic behaviour of silica filled natural rubber composites – Correlation of shear with elongational testing

Dynamic mechanical behaviour of natural rubber-silica composites was studied by a frequency sweep method at different temperatures (40 °C,70 °C and 100 °C) using a dynamic mechanical analyzer and a rotorless rheometer, RPA, in an attempt to establish a correlation between the two. The composites with silica content up to 40 phr were studied. It was found that the dependence of dynamic modulus on the frequency as obtained from both the instruments followed a similar trend. This suggests that the dynamic mechanical properties of rubber compounds can be determined even during curing. A correlation could be arrived at between the two sets of data, making it possible to predict one set knowing the other. The impact of silane coupling agent, bis (3-triethoxysilylpropyl tetrasulphide), TESPT, on viscoelasticity was also investigated. The mechanical properties were improved in the presence of TESPT. Additionally, an increase in thermal stability was also observed in the presence of TESPT. Scanning electron micrographs showed the better filler dispersion in the case of silane-coupled silica composites.