1─芳氧基乙酰基─4─苯甲酰氨基硫脲衍生物的合成及其生物活性研究

１─芳氧基乙酰基─４─苯甲酰氨基硫脲衍生物的合成及其生物活性研究魏太保，陈继畴（西北师范大学化学系，兰州，７３００７０）杨素铀，王秀春（西北师范大学生物系，兰州，７３００７０）关键词：１—芳氧基乙酰基—４—苯甲酰基氨基硫脲，相转移催化，合成，生物活性...     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Spectroscopic and biological studies on newly synthesized nickel(II) complexes of semicarbazones and thiosemicarbazones

Nickel(II) complexes, having the general composition Ni(L)2X2, have been synthesized [where L: isopropyl methyl ketone semicarbazone (LLA), isopropyl methyl ketone thiosemicarbazone (LLB), 4-aminoacetophenone semicarbazone (LLC) and 4-aminoacetophenone thiosemicarbazone (LLD) and X=Cl-, 1/2SO(4)2-]. All the Ni(II) complexes reported here have been characterized by elemental analyses, magnetic moments, IR, electronic and mass spectral studies. All the complexes were found to have magnetic moments corresponding to two unpaired electrons. The possible geometries of the complexes were assigned on the basis of electronic and infrared spectral studies. Newly synthesized ligand and its nickel(II) complexes have been screened against different bacterial and fungal growth.     

Determination of complex formation constants by phase sensitive alternating current polarography: Cadmium-polymethacrylic acid and cadmium-polygalacturonic acid

The use of phase sensitive alternating current polarography (ACP) for the evaluation of complex formation constants of systems where electrodic adsorption is present has been proposed. The applicability of the technique implies the previous selection of the phase angle where contribution of capacitive current is minimized. This is made using Multivariate Curve Resolution by Alternating Least Squares (MCR-ALS) in the analysis of ACP measurements at different phase angles. The method is checked by the study of the complexation of Cd by polymethacrylic (PMA) and polygalacturonic (PGA) acids, and the optimal phase angles have been ca. −10° for Cd-PMA and ca. −15° for Cd-PGA systems. The goodness of phase sensitive ACP has been demonstrated comparing the determined complex formation constants with those obtained by reverse pulse polarography, a technique that minimizes the electrode adsorption effects on the measured currents.     

Phase separation behavior of epoxy resin modified with crosslinked rubber

Low molecular weight liquid rubber (ATBN = amine terminated butadiene acrylonitrile copolymer or CTBN = carboxyl terminated butadiene acrylonitrile copolymer)–DGEBA (diglycidyl ether of bisphenol A) blends indicated upper critical solution temperature (UCST) behavior. The phase separation behavior of the neat and crosslinked rubber (ATBN, CTBN)–epoxy blends was analyzed by a laser light scattering experiment. Lauryl peroxide (LPO) was employed to crosslink the rubber during the initial annealing stage. The onset point of the phase separation in the crosslinked ATBN–epoxy system occurred later than in the case of the neat ATBN–epoxy system. However, the onset point of the phase separation process started earlier in the case of the crosslinked CTBN–epoxy system. The domain correlation length of the crosslinked rubber-added system was smaller than that of the neat rubber-added system.     

高折光指数光学树脂的合成——相转移法合成不饱和硫醇酯单体的条件控制

采用正常的低温相转移催化（ＰＴＣ）和反滴碱溶液ＰＴＣ法分别合成了含硫双烯ＭＥＳＤＭＡ和单烯ＭＥＰＳＭＡ．１Ｈ ＮＭＲ分析证明ＭＥＳ中的杂质主要是由原料ＴＤＧ引入的．对含单个巯基的ＭＥＰＳ的正常ＰＴＣ酯化接枝双键，因存在巯基和不饱和双键的加成反应而导致失败．作者最终得到了折光指数在１６２５以上的ＭＥＳＤＭＡ／ＭＥＰＳＭＡ共聚物．     

分子手性的温度效应：D-丙氨酸的变温X衍射和中子衍射研究

利用X衍射（300, 270, 250 K）和中子衍射（300, 260, 250, 240 K）研究D-氨酸单晶在静态的和动力学的变温过程中的结构特征以及考证Salam预言的由D到L构型转变的可能性. 实验发现丙氨酸晶体的空间群P212121对称性没有改变. 实验结果否定了构型相变的可能，但是发现在~250 K有一个微小的、连续的对称性破缺发生. 晶体分子振动产生的环电流模型可以用来解释D-和L-丙氨酸单晶直流磁化率和天然旋光角相反的现象， 与之相关的中子衍射数据进一步揭示了变温过程中αC－H(2), N－H(1), N－H(4), N－H(6) 键长的不同变化. 中子衍射还显示了质子移动所导致的动力学无序，来源于分子内氨基和羧基形成的氢键和分子间αC－H和氨基形成的氢键，从而产生的晶格扭曲和NH³⁺的扭转. 实验结果表明Salam预言相变不是传统意义的结构相变，而是由于温度效应导致了在相变点附近分子的宇称破缺能差（PVED）增大，然后通过氨基酸分子的隧道效应扩大了宇称破缺能差的影响，这一研究为生命现象中快速的均一手性形成提供了非线性机理的合理解释.     

Curing reaction characteristics and phase behaviors of biphenol type epoxy resins with phenol novolac resins

Diglycidyl ether of 4,4′-dihydroxybiphenol (BPDGE) is a liquid crystalline epoxy. The biphenyl epoxy (diglycidyl ether of 3,3′,5,5′-tetramethyl-4,4′-biphenyl, TMBPDGE) has found great applications in plastic encapsulated semiconductor packaging. Phenol novolac (PN) was used as curing agent. The reaction kinetics of BPDGE/PN and TMBPDGE/PN systems in the presence of triphenylphosphine (TPP) were characterized by an isoconversional method under dynamic conditions using differential scanning calorimetry (DSC) measurements. The results showed that the curing of epoxy resins involves different reaction stages and the values of activation energy are dependent on the degree of conversion. The effects of curing temperature on their phase structure have been investigated with polarized optical microscopy and Wide-angle X-ray diffraction. With proper curing process, BPDGE showed a nematic phase when cured with PN.     

Formulation–composition map of a lecithin-based emulsion

Formulation–composition map is an interesting tool to predict the nature of an emulsion, stability, viscosity and nevertheless to decide the mixing protocol of its ingredients. Information based on optimum formulation (environmental conditions at which the affinity of an emulsifier for oil and for aqueous phase is same), which is depicted through hydrophilic–lipophilic deviation (HLD) concept, is necessary to make a formulation–composition map of an emulsion. In order to apply this concept in food emulsions, it is necessary to determine characteristic constants of each component of the system, i.e. the aqueous phase, the oil phase and the emulsifier at equilibrium. In this work formulation–composition map of a sunflower oil–water–lecithin system, based on the knowledge of phase behavior of lecithin at equilibrium and emulsification, was made. The shape of inversion line on formulation–composition map was not the classical stair type rather an almost vertical inversion line at water-fraction (f_w) near 0.20 was observed. It was supposed to be linked to the viscosity of oil phase which was 50 times the viscosity of aqueous phase. Additionally, emulsions were of oil-in-water (O/W) type for f_w higher than 0.20, but their viscosity and the drop size behavior with respect to salt concentration as formulation variable did not show the existence of transitional inversion line on formulation–composition map. Such map in advance can certainly facilitate the guidelines for dynamic emulsification.     

Cross-linking chemistry and biology: development of multifunctional photoaffinity probes

An efficient method of photoaffinity labeling has been developed based on rationally designed multifunctional photoprobes. Photoaffinity techniques have been used to elucidate the protein structure at the interface of biomolecules by the photochemical labeling of interacting sites. However, the identification of labeled sites within target proteins is often difficult. Novel biotinyl bioprobes bearing a diazirine photophore have contributed significantly to the rapid elucidation of ligand binding sites within proteins, thereby extending conventional photoaffinity methods. This article discusses the synthesis and applications of various photoprobes bearing a biotin, including strategies using cleavable linkages between photophores. The combination of photoaffinity methods with chip technology is also described as a novel entry to rapid affinity-based screening of inhibitors. This review focuses on a rapid and reliable photoaffinity method utilizing diazirine-based multifunctional photoprobes with numerous potential applications in functional proteomics of biomolecular interactions.