Determination of pharmaceuticals in river water by column switching of large sample volumes and liquid chromatography–diode array detection,assisted by chemometrics: An integrated approach to green analytical methodologies

An analytical method for the simultaneous determination of nine β-blockers (sotalol atenolol, nadolol, pindolol, metoprolol, timolol, bisoprolol, propanolol and betaxolol) and two analgesics (paracetamol and phenazone) in river water by liquid chromatography and diode array detection is reported. The method involves a modified precolumn switching methodology replacing the small precolumn with a short C18 liquid chromatography column (50 mm × 4.6 mm, 5 μm particle size), thus allowing the preconcentration of large water sample volumes whereas interferences eluting at the first of the chromatogram were discarded to waste. This approach allowed to preconcentrate 30 mL river water samples, modified with 0.4% MeOH, achieving univariate method detection and determination limits ranged between 0.03 and 0.16 μg L⁻¹ and between 0.2 and 0.5 μg L⁻¹, respectively, with precision values lower than 9.4% for spiking levels at the quantitation limits of each analyte and lower than 4.0%, except bisoprolol (8.3%), for higher spiking levels (1.0 μg L⁻¹ of all analytes). Matrix background was reduced in three way data by a baseline correction following the Eilers methodology, whereas multivariate curve resolution and alternating least squares in combination with the standard addition calibration method, applied to these data, coped with overlapping peak, systematic (additive) and proportional (matrix effect) errors. The method was successfully applied for the determination of the target pharmaceuticals in river water from three places in a river stream with acceptable recoveries and precision values, taking into account the complexity of the analytical problem. The joint statistical test for the slope and the intercept of the linear regression between the nominal concentration values versus those predicted, showed that the region computed contained the theoretically expected values (0) for the intercept and (1) for the slope (at a confidence level of 95%), which indicates the absence of both constant and proportional errors in the predicted concentrations.     

Determination de l'Acide l-Ascorbique a l'Aide d'Electrodes Bacteriennes,Tissulaires et Enzymatiques

Abstract

L-ascorbic acid membrane electrodes based upon the use of four classes of biocatalysts immobilized at an oxygen electrode are evaluated and compared in terms of electrode properties and operating requirements. Isolated ascorbate oxydase enzyme in soluble form and in covalent binding matrices, peel of cucumber and living bacterial cells of Enterobacter agglomerans strain, respectively, are employed as biocatalytic layers. The physico-chemical factors, life times and interferences are discussed in details. The low stability of the soluble enzyme sensor does not allow its analytical utilization, but the immobilized enzyme, bacterial and tissue electrodes can be used, even in multivitamin pharmaceutical formulations. The common linear range of those three biosensors are of 4.10^?6 M to 7.10^?4 M with a precision and a reproducibility of ± 3%.     

Separation,Characterization, and Quantification of Atorvastatin and Related Impurities by Liquid Chromatography-Electrospray Ionization Mass Spectrometry

A method coupling high-performance liquid chromatography with diode-array detector and electrospray ionization mass spectrometry (HPLC-DAD-ESI/MSⁿ) has been developed for the separation and characterization of atorvastatin and its related impurities. The results obtained using positive ion mode showed some diagnostic fragments that are useful for the identification of atorvastatin related impurities in real samples. Quantitative analysis of drug impurities was performed in the multiple reaction monitoring mode. Quantification limits for impurities were in the ranges 21.5–70.8 ng mL^?1. The method was successfully applied to the drug purity evaluation and quantitative determination of atorvastatin related impurities in bulk drugs and pharmaceutical formulations.     

Quantitative Densitometric Determination of Theophylline

Abstract

A method for identification and quantification of theophylline in certain dosage forms, that employs TLC-scanner is reported. the method is applied for theophylline either as raw material or in certain dosage forms admixed with other medicamenta. Samples were extracted with methanol, separated and measured in situ on silica gel G plates at about 270 nm using TLC-scanner. the mean recovery (six determinations) was 99.9± 0.57. the developed procedure has been found to be simple, rapid and precise and its application to various dosage forms was demonstrated and yields comparable results with UV measurement after location, scraping and elution from the plates.     

A Stability Indicating High Performance Liquid Chromatographic Assay of Isradipine in Pharmaceutical Preparations

Abstract

A high performance liquid chromatographic procedure has been developed for the assay of isradipine in bulk form and tablet and capsule pharmaceutical preparations. The separation is achieved within 20 min on an octadecylsilane column at ambient temperature with a mobile phase of 60:40 v/v methanol - water, a flow rate of 1 mL/min, and detection at 325 nm. Degradation studies showed no peak interference between isradipine and degradation products. It was also determined that the excipients in the commercial tablet and capsule preparations did not interfere with the assay. The method was linear in the range 10–60 μg/mL with accuracy and precision in the 0.40 - 1.53% range.     

Electrochemical Determination of Anti-Hyperlipidemic Drug Ezetimibe Based on its Oxidation on Solid Electrodes

Ezetimibe is the first of a new class of drugs that selectively inhibits cholesterol absorption in the small intestine and reduces plasma LDL cholesterol. In this study, electrochemical oxidation of ezetimibe was investigated on carbon based electrodes and a single and irreversible peak at both electrodes was observed. A linear response was detected between 2 × 10^?6 and 8 × 10^?5 M with glassy carbon electrode and between 2 × 10^?6 and 2 × 10^?4 M with a boron-doped diamond electrode in 0.1 M H₂SO₄ supporting electrolyte. The proposed methods were successfully applied for the determination of ezetimibe from pharmaceutical dosage forms and human serum samples.     

Analysis of omeprazole and its main metabolites by liquid chromatography using hybrid micellar mobile phases

Omeprazole is a selective inhibitor of gastric acid secretion and is one of the most widely prescribed drugs internationally. A chromatographic procedure that uses micellar mobile phases of sodium dodecyl sulphate and propanol buffered at pH 7 and a C18 column is reported for the determination of omeprazole and its principal metabolites (omeprazole sulphone and hydroxyomeprazole) in urine and serum samples.In this work, direct injection and UV detection set at 305 nm was used. Omeprazole and its metabolites were eluted in less than 11 min with no interference by the protein band or endogenous compounds. Adequate resolution was obtained with a chemometric approach, in which the retention factor and shape of the chromatographic peaks were taken into account. The analytical parameters including linearity (r > 0.9998), intra- and inter-day precision (RSD, %: 0.6-7.9 and 0.14-4.7, respectively) and robustness were studied in the validation of the method for the three compounds. The limits of detection and quantification were less than 6 and 25 ng mL⁻¹, respectively. Recoveries in micellar medium, plasma and urine matrices were in the 98-102% range. Finally, the method was successfully applied to the determination of omeprazole and its metabolites in physiological samples. Omeprazole was also analysed in pharmaceutical formulations.     

Multi-residue analytical method for the determination of emerging pollutants in water by solid-phase extraction and liquid chromatography-tandem mass spectrometry

This paper describes the development and validation of a method for the simultaneous determination of 53 multi-class emerging organic pollutants in water samples using solid-phase extraction (SPE) followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), using electrospray ionisation (ESI) in both positive and negative modes. Target compounds include acidic herbicides, UV filters, insect repellents, organophosphorous flame retardants, a bactericide, pharmaceuticals and metabolites. A single SPE consisting on the loading of 200-500 mL of sample adjusted to pH 7 on Oasis HLB 200mg cartridges and elution with methanol, permitted obtaining good recoveries: higher than 60% for tap, surface and wastewater in most cases. The 7 isotopically labelled internal standards effectively compensated losses during sample preparation and matrix effects at LC-MS/MS determination. The precision of the method, calculated as relative standard deviation (RSD) was below 15% for all compounds and all tested matrices. Detection limits (LODs) based on the confirmation, less intense, MRM (multiple reaction monitoring) transition and considering blanks varied between 0.3 and 30 ngL(-1). Finally, the developed method was applied to the determination of target analytes in various samples, including tap, surface and waste water. Among the tested emerging pollutants, 31 were found in wastewater in concentrations reaching up to 10 microgL(-1) in the case of ibuprofen. Also, 13 species were detected in tap water with concentrations up to 0.13 microgL(-1) for tri(chloropropyl) phosphate (TCPP).     

Electroanalytical Studies and Simultaneous Determination of Amlodipine Besylate and Atorvastatine Calcium in Binary Mixtures Using First Derivative of the Ratio‐Voltammetric Methods

The electrochemical behavior of atorvastatin and amlodipine at a glassy carbon electrode has been studied using different voltammetric techniques. First derivative of the ratio voltammetric methods for determination of amlodipine and atorvastatin in tablets in the presence of the other compound has been described. This technique depends on the measuring of first derivative of the ratio voltammograms of each concentration as a function of the increased concentrations. DP and SW voltammetric methods depend on first derivative of the ratio‐voltammetry by measurements of the selected potentials for amlodipine and atorvastatin. The linear response was within the range of 4×10^?6–1×10^?4 M for amlodipine and 2×10^?6–1×10^?4 M for atorvastatin. The proposed methods have been extensively validated.     

Electroanalytical determination of estriol hormone using a boron-doped diamond electrode

A boron-doped diamond (BDD) electrode was used for the electroanalytical determination of estriol hormone in a pharmaceutical product and a urine sample taken during pregnancy by square-wave voltammetry. The optimized experimental conditions were: (1) a supporting electrolyte solution of NaOH at a pH of 12.0, and (2) a frequency of 20 Hz, a pulse height of 30 mV and a scan increment of 2 mV (for the square-wave parameters). The analytical curve was linear in the concentration range of 2.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹ (r = 0.9994), with a detection limit of 1.7 × 10⁻⁷ mol L⁻¹ and quantification limit of 8.5 × 10⁻⁷ mol L⁻¹. Recoveries of estriol were in the range of 98.6-101.0%, for the pharmaceutical sample, and 100.2-103.4% for the urine sample, indicating no significant matrix interference effects on the analytical results. The accuracy of the electroanalytical methodology proposed was compared to that of the radioimmunoassay method. The values for the relative error between the proposed and standard methods were −7.29% for the determination of estriol in the commercial product and −4.98% in a urine sample taken during pregnancy. The results obtained suggest a reliable and interesting alternative method for electroanalytical determination of estriol in pharmaceutical products and urine samples taken during pregnancy using a boron-doped diamond electrode.