Voltammetric Study and Direct Analytical Determination of the Antiparkinson Drug Benserazide

For the first time, a simple differential pulse voltammetry methodology for direct determination of benserazide in presence of levodopa in tablets was developed without any redox mediator, modified electrodes, or the aplication of mathematic deconvolution of signals. Benserazide was studied by differential pulse voltammetry using glassy carbon electrode in aqueous media. The drug exhibited a main well-defined oxidation signal in a broad pH range (2–10), and two poorly resolved signals at higher potentials. We have found that levodopa does not interfere on the electrochemical response of benserazide at pH 6.0. Thus, at this pH value, the developed analytical method exhibited adequate repeatability and reproducibility (RSD < 2%), recoveries >98.5%, which permitted its successful application to both the assay and the uniformity content of benserazide. Also, hydrolytic degradation studies of benserazide were carried out by differential pulse voltammetry.     

Two improved formulations for the minimum latency problem

In network problems, latency is associated with the metric used to evaluate the length of the path from a root vertex to each vertex in the network. In this work we are dealing with two applications or variations of the minimum latency problem known as the repairman problem and the deliveryman problem. We have developed two integer formulations for the minimum latency problem and compared them with other two formulations from the literature for the time-dependent traveling salesman problem. The present work highlights the similarities and differences between the different formulations. In addition, we discuss the convenience of including a set of constraints in order to reduce the computation time needed to reach the optimal solution. We have carried out extensive computational experimentation on asymmetrical instances, since they provide the characteristics of the deliveryman and repairman problems in a better way.     

Spectrophotometric Determination Of Rifampin in the Presence of its Degradation Products in Pharmaceutical Preparations

Abstract

The determination of rifampin in the presence of its main degradation products, 3-formyl rifampin and rifampin quinone using two spectrophotometric methods is described. Both Glenn's method and first derivative spectrophotometry were successfully adopted. No preliminary separation steps were required in either cases. Both methods gave accurate and reproducible results for the determination of the drug in dosage forms. The percentage recoveries ranged from 99.33% ±0.63 to 100.2% ± 0.44. The proposed methods are more simple, rapid than other existing methods and can be readily adopted in control laboratory.     

Potentiometric determination of mefenamic acid in pharmaceutical formulation by membrane sensor based on ion-pair with basic dye

The characteristics,performance and application of membrane sensors based on ion-pair Brilliant Green mefenamate are described.The sensor’s response to the mefenamate ion has the sensitivity of （86.0±2.0） mV/pC over the range of 9×10^-5-1×10^-2moI/Land the detection limit of 4.5×10^-5mol/L at pH 8.5-12.The sensor is easily assembled at a relatively low cost and has fast response time（5-10 s）.The proposed sensor displayed good selectivity for mefenamate ion in the presence of different substances.It was used to determine mefenamic acid in pharmaceuticals.     

Determination of nicotinamide by stopped-flow injection method in pharmaceutical formulations

A simple stopped-flow injection system with spectrophotometric detection was proposed for the determination of nicotinamide (NAM) in pharmaceutical formulations. In this system cyanogen chloride formed from the combination of an acidic KSCN with the NaClO streams reacts with injected NAM to form glutaconic aldehyde. Then the product of these three components was coupled with another buffered (pH 3.5) stream of barbituric acid and directed towards the detector. A 45 s after sample injection the pump was stopped for 130 s. During this time the reactants in the flow cell were provided with the required temperature (40 °C) by placing the cell in a home made cell jacket to increase the yield of the polymethine dye product. Eventually, the absorbance of the formed pink color dye was monitored spectrophotometrically at 560 nm and NAM in the concentration range of 1.0–25.0 μg/mL (R = 0.9974 and D.L = 0.5 μg/mL) was determined. The results obtained by this method were compared statistically and agree with those obtained by the method described in the British Pharmacopoeia.     

Determination of Total Chromium in Biological Samples by Automated Reagent Injection Chemiluminescence Analysis

A sensitive method for the determination of total chromium in real samples by flow injection–chemiluminescence (FI–CL) analysis was proposed. It was found that the CL intensity from luminol–lysozyme reaction could be markedly quenched, and the decrease of CL intensity was linear with the logarithm of Cr(III) concentrations over the range of 5.0 to 4000 pg mL^?1 with a detection limit of 2.0 pg mL^?1 (3σ) and relative standard deviations (RSDs) of 3.0, 2.6, and 2.0% for 10, 100, and 1000 pg mL^?1 Cr(III) (n = 7), respectively. At a flow rate of 2.0 mL min^?1, the whole process including sampling and washing could be accomplished within 36 s. The proposed CL method was successfully applied to the determination of total chromium in pharmaceutical capsules, a dietary supplement, and spiked human serum samples, with recoveries from 92.2 to 108.4% and RSDs of less than 4.0%. Using the homemade FI–CL model, the binding constant (K = 4.38 × 10⁶ L mol^?1) and the binding sites (n ≈ 1) of Cr(III) to lysozyme were given.     

A new DMAP-catalyzed and microwave-assisted approach for introducing heteroarylamino substituents at position-4 of the quinazoline ring

We report herein a new methodology for synthesizing quinazoline derivatives bearing a heteroarylamino moiety at position-4 of the quinazoline ring. As an alternative to the Buchwald–Hartwig cross-coupling reaction, which appears, until now, as the only efficient way to react 4-chloroquinazolines with numerous amino nitrogen-containing heterocycles displaying poor nucleophilicity, we developed a DMAP-catalyzed reaction involving microwave irradiation. Optimization of the reaction conditions led to the use of 30 mol % of DMAP in toluene, using a monomode microwave reactor and sealed vials. Moreover, the S_NAr reaction intermediate salt was isolated and fully characterized. Finally, the procedure was extended to two different 2-substituted-quinazoline series and also to various anilines, demonstrating that this approach was a general efficient way to access to such 4-substituted quinazoline scaffolds of high pharmaceutical interest.     

Minimum Evaporation Model of Dermatological Delivery Systems. Lamellar Liquid Crystal Formulations Containing Brazilian Nut (Bertholletia excelsa HBK) Vegetable Oil and Guarana Glycolic Extract

Formulations with lyotropic liquid crystals were prepared from a Brazilian nut vegetable oil, guarana extract and combination of sorbitan monooleate (Span 80) and sorbitan monolaurate ethoxylate EO 20 (Tween 20) in the ratio 1:3 (surfactant component) and their physical–chemical aspects and rheological properties were determined. Compositions with liquid crystals were found in the pseudoternary diagram in a surfactant range of 70–90% and polarized light microscopy, small-angle x-ray scattering (SAXS) showed them to be lamellar. The preparations were furthermore characterized rheologically by shear stress shear rate sweeps finding plastic and pseudoplastic behavior without thixotropy. Electric conductivity and pH measurements demonstrated a potential for future application as dermatological delivery system of the active compounds in the Bertholletia excelsa and Paullinia cupana.      

Quantification of erythromycin in pharmaceutical formulation by transmission Fourier transform infrared spectroscopy

A simple, cost-effective and environmental friendly analytical method was developed for the quantification of erythromycin in tablet formulation using transmission Fourier Transform Infrared (FT-IR) spectroscopy for routine quality control analysis. There is no need of sample preparation except pellet formation for FT-IR analysis. Use of solvent was totally avoided in this method. Calibration was carried out by using simple Beer’s law in the FT-IR region between 1743 and 1697 cm⁻¹. The excellent coefficient of determination (R² = 0.998) was achieved with 0.0247 and 1.14 root mean square error of prediction (RMSEP) and root mean square error of cross validation (RMSECV), respectively. The results of the study revealed that the transmission FT-IR spectroscopy could be effectively used for rapid determination of active ingredients like erythromycin in pharmaceutical formulations to control the quality of finished products.     

A review on key aspects of wet granulation process for continuous pharmaceutical manufacturing of solid dosage oral formulations

Wet granulation process is a major unit operation in production of pharmaceuticals as solid dosage oral formulation. Indeed, granulation is used to improve the formulation properties such as flowability, compressibility, and so on for pharmaceutical manufacturing. Different types of granulations can be used in pharmaceutical manufacturing in which the selection of proper process depends on the operational conditions as well as formulation properties. In current decades, twin-screw wet granulation has been of paramount interest owing to its superior properties. Pharmaceutical manufacturing industry are trying to move towards continuous mode by which the efficiency can be improved compared to the batch mode. Therefore, development of continuous granulation process is of great importance. In this review article, various processing units applicable for wet granulation of pharmaceutical formulations for solid dosage forms are reviewed and discussed. The advantages and disadvantages of the processes are discussed and listed along with modeling approaches for simulation of process. The governing models and numerical schemes applicable for design of wet granulation are also critically discussed. The main focus is on wet granulation as this method has attracted much attention in pharmaceutical processing.