大庆渣油族组分非等温热反应的研究

采用动态热重分析法在升温速率为６．２Ｋ·ｍｉｎ￣（－１）及惰性气流量１００ｃｍ￣３·ｍｉｎ￣（－１）的条件下，对大庆渣油族组分的热转化行为进行了考察，获得了族组分的热转化速率峰值、速率峰值处的反应温度、转化率和剧裂分解温度区间等动力学基本数据以及各族组分的生焦性能。数据分析表明，族组分的热反应活性顺序为：饱和分＞胶质＞芳香分＞沥青质。在大庆渣油族组分热转化的两个温区内，采用分段一级动力学模型较好地拟合了实验数据，确定了各族组分在两个温区内的热反应动力学参数。     

串联质谱法在农药残留分析中的应用

农药残留问题已经成为全球关注的热点问题,尤其是农产品和食品中的农药残留更受到各国政府和公众的普遍关注。快速、准确、灵敏的农药残留分析和检测技术已经成为保障食品安全的有效手段,是当前农药残留分析研究和发展的方向。1983年,McLafferty等发明了串联质谱技术(MS-MS),目前已发展成为一种成熟的技术,在许多研究领域发挥了巨大作用。同样,在农药残留分析领域,串联质谱技术也越来越体现出其定性准确、排除干扰能力强以及灵敏度高的特点。     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.     

A public-key cryptosystem utilizing cyclotomic fields

While it is well-known that the RSA public-key cryptosystem can be broken if its modulusN can be factored, it is not known whether there are other ways of breaking RSA. This paper presents a public-key scheme which necessarily requires knowledge of the factorization of its modulus in order to be broken. Rabin introduced the first system whose security is equivalent to the difficulty of factoring the modulus. His scheme is based on squaring (cubing) for encryption and extracting square (cube) roots for decryption. This introduces a 14 (19) ambiguity in the decryption. Various schemes which overcome this problem have been introduced for both the quadratic and cubic case. We generalize the ideas of Williams' cubic system to larger prime exponents. The cases of higher prime order introduce a number of problems not encountered in the quadratic and cubic cases, namely the existence of fundamental units in the underlying cyclotomic field, the evaluation of higher power residue symbols, and the increased difficulty of Euclidean division in the field.     

神东煤液化残渣显微组分的特征与分类研究

在PSU处理能力为0.1t/d的小型连续液化装置上对神东煤进行了加氢液化试验，对其液化残渣进行了显微光学研究。结果表明，在液化过程中，原料煤中的壳质组和镜质组全部转化，惰质组部分转化，在残渣中可见未反应的惰质组，同时在残渣中出现中间相小球体和半焦等新生组分。矿物质大量富集，并基本保持煤中原有的形态特征。THF处理后残余惰质组反射率在2.0%~3.8%，略高于煤中高反射率惰质组反射率，煤中高反射率惰质组是残余惰质组的主要来源。     

Evaluation of the limit of performance of an analytical method based on a statistical calculation of its critical concentrations according to ISO standard 11843: Application to routine control of banned veterinary drug residues in food according to European Decision 657/2002/EC

Traceability of the measurement of analytical parameters capable of evaluating the performance of methods is an important concept for the assessment of quality for the routine control, especially for residue monitoring of non-authorized medicinal substances in food from animal origin. The European Decision no. 657/2002/EC recommends to calculate two statistical limits, CCα and CCβ, which allow to evaluate the critical concentrations above which the method reliably distinguish and quantify a substance taking into account the variability of the method and the statistical risk to take a wrong decision. The calculation, which can be derived from the ISO standard no. 11843 is applied on a routine basis. An example displays a very simple way for evaluating the performance of an LC-MSMS method which has been validated a few years ago and is qualified onto a Micromass Quattro LCZ tandem mass spectrometer to monitor and confirm the nitrofuran metabolite residues in food from animal origin. Community Reference Laboratory for Antimicrobial Veterinary Drug Residue Control in Food from Animal Origin     

Quality control of Metamitron in agrochemicals using Fourier transform infrared spectroscopy in the middle and near range

Two vibrational spectrometry-based methodologies were developed for Metamitron determination in pesticide formulations. Fourier transform-middle infrared (FT-MIR) procedure was based on the extraction of Metamitron by CHCl₃ and latter determination by peak area measurement between 1556 and 1533 cm⁻¹, corrected with a two points baseline established from 1572 to 1514 cm⁻¹. Fourier transform-near infrared (FT-NIR) determination was made after the extraction of Metamitron in acetonitrile and measuring the peak area between 6434 and 6394 cm⁻¹ corrected using a two points baseline defined between 6555 and 6228 cm⁻¹. Repeatability, as relative standard deviation, of 5 independent measurements at mg g⁻¹ concentration level, of 0.16% and 0.07% for MIR and NIR and a limit of detection of 0.03 and 0.004 mg g⁻¹ were obtained for MIR and NIR, respectively.NIR determination provides a sample frequency of 120 h⁻¹, higher than that found by MIR and liquid chromatographic methods (60 and 15 h⁻¹, respectively). On the other hand, the NIR method reduces the solvent consumption and waste generation, to only 1 ml acetonitrile per sample as compared with 3.4 ml chloroform required for the MIR determination and 60 ml acetonitrile used in the chromatographic reference procedure. So, vibrational procedures can be considered serious alternatives to long and time consuming chromatographic methods usually recommended for quality control of commercially available pesticide formulations.     

光学活性甲苄菊酯的合成及其结构与活性关系的研究

本文改进了Goffinet方法,完成了(±)-trans菊酸的拆分;改进了Campbel?方法,只用一种拆分剂(奎宁)完成了对(±)-cis菊酸的拆分。用IR、~1HNMR、旋光度测定等方法确定了各甲苄菊酯光学异构体的结构。生物试验表明结构与活性有如下关系:1,各异构体中以1R-酯的杀虫活性为高,尤其(-)-(1R,3R)-trans甲苄菊酯对全部测试昆虫均显示较高的杀虫活性;2,昆虫不同,各异构体的活性次序也略有差异。     

Effect of heat treatment on the physico-chemical properties and catalytic activity of manganese nodules leached residue towards decomposition of hydrogen peroxide

The effect of calcination temperature on the physico-chemical characterization of manganese nodule leached residue (MNLR) and water-washed manganese nodule leached residue (WMNLR) has been investigated on the basis of chemical analysis, XRD, TG-DTA, FTIR, surface hydroxyl groups, surface oxygen, reducing and oxidizing sites, surface area. XRD and IR confirm the presence of amorphous iron oxyhydroxides, delta-MnO2, which are converted to alpha-Fe2O3 and gamma-Mn2O3 phases above 400 degrees C of calcination, respectively. A solid solution of Fe2O3 and Mn2O3 is formed above 700 degrees C. The surface area, surface hydroxyl group, surface oxygen, reducing and oxidizing sites increase with the increase in calcination temperature up to 400 degrees C and then decrease with further rise in calcination temperature up to 700 degrees C. The catalytic activity of the sample towards H2O2 decomposition shows the similar trend as surface properties. A suitable Mn(3+)Mn4+ couple favours H2O2 decomposition reaction. The activity has been correlated with various physico-chemical properties.     

Coadsorption of carbofuran and lead at the water/silica interface. Possible impact on environment

Despite its extremely weak adsorption at the water/silica interface, carbofuran can, however, induce the coadsorption of metallic salts, like, for example, lead nitrate, and thus enhance its adsorption. We quantitatively studied this phenomenon with a depletion method and under concentration conditions close to the environmental ones. Heavy metal salt was found to positively adsorb, whereas carbofuran relative adsorption is generally slightly negative. This study provides evidence that considering these facts is of paramount importance in environmental prospects. To cite this article: G. Elmanfe et al., C. R. Chimie 9 (2006).