Determination of risperidone at picogram level in human urine by luminol—H2O2 chemiluminescence

A simple flow-injection chemiluminescence method with synergistic enhancement has been investigated for the rapid and sensitive determination of antipsychotic risperidone. The synergistic action was significant in the chemiluminescence system of luminol—hydrogen peroxide with risperidone as an enhancer. The increased chemiluminescence intensity was correlated with risperidone concentration within the range from 10 pg mL⁻¹ to 1.0 ng mL⁻¹ with relative standard deviations lower than 5.0 % and the detection limit of 4 pg mL⁻¹. At a flow rate of 2.0 mL min⁻¹, the flow-injection chemiluminescence method exhibited both a high sensitivity and excellent selectivity giving a throughput of 120 times per hour. The proposed method was successfully applied to determine the risperidone content in human urine without any pretreatment. It was found that the excretive amounts of risperidone reached their maximum after taking 2.0 mg of risperidone for 1 h, with a total excretive ratio of 17.37 % in 8.5 h.     

Electrogenerated chemiluminescence biosensing for the detection of prostate PC-3 cancer cells incorporating antibody as capture probe and ruthenium complex-labelled wheat germ agglutinin as signal probe

A highly selective and sensitive electrogenerated chemiluminescence (ECL) biosensor for the detection of prostate PC-3 cancer cells was designed using a prostate specific antibody as a capture probe and ruthenium complex-labelled wheat germ agglutinin as a signal probe. The ECL biosensor was fabricated by covalently immobilising the capture probe on a graphene oxide-coated glassy carbon electrode. Target PC-3 cells were selectively captured on the surface of the biosensor, and then, the signal probe was bound with the captured PC-3 cells to form a sandwich. In the presence of tripropylamine, the ECL intensity of the sandwich biosensor was logarithmically directly proportion to the concentration of PC-3 cells over a range from 7.0 × 10² to 3.0 × 10⁴ cells mL⁻¹, with a detection limit of 2.6 × 10² cells mL⁻¹. The ECL biosensor was also applied to detect prostate specific antigen with a detection limit of 0.1 ng mL⁻¹. The high selectivity of the biosensor was demonstrated in comparison with that of a lectin-based biosensor. The strategy developed in this study may be a promising approach and could be extended to the design of ECL biosensors for highly sensitive and selective detection of other cancer-related cells or cancer biomarkers using different probes.     

Flow-injection chemiluminescence method for determination of critical micelle concentration of surfactants

In this study, chemiluminescence (CL) behaviour of Luminol-H₂O₂ in the presence of the different concentrations of four surfactants, cetyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), sodium dodecyl sulphate (SDS) and polyoxyethylene dodecyl ether (Brij-35), was investigated. A novel method for the direct determination of critical micelle concentration (CMC) of the surfactants using flow-injection CL is described. Under the optimum conditions, the luminescence intensity of the Luminol-H₂O₂ system increased gradually with increasing concentration of the surfactants before the CMC, but rapidly reached to the emission maximum at the CMC, followed by a decrease after the CMC. The concentrations of the surfactants corresponding to the luminescence maximum are in agreement with the literature CMC values. The main factors affecting the determination of CMC are discussed. The mechanistic studies show that the luminescence peaks observed in the experiment were mainly because of the protective effect of the micelle against the transition of the excited species and the retarding effect of the micelle structures on the CL reaction rate.     

Electrogenerated Chemiluminescence of Cationic Triangulene Dyes: Crucial Influence of the Core Heteroatoms

Trianguleniums are fascinating conjugated hexacyclic cations that exhibit interesting electronic and optical properties. Herein, the electrogenerated chemiluminescence (ECL) emission of this family of fluorescent dyes is reported for the first time. Redox behavior and fluorescence properties of eight cationic triangulene luminophores with different heteroatom patterns in the core structure and various pending substituents were examined to rationalize the ECL. Clearly, the more electron‐rich the carbocation, the more efficient the corresponding ECL; two very distinct classes of triangulenes can be drawn from these studies by using an ECL wall sufficiency formalism.     

亚硫酸氢钠-过氧化氢超微弱化学发光体系用于核黄素检测

亚硫酸氢钠(Na HSO3)和过氧化氢(H2O2)反应可产生微弱的化学发光。核黄素对亚硫酸氢钠和过氧化氢的化学发光有极大的增强作用,且化学发光强度在0.02~2.0μg/m L范围内与核黄素浓度呈良好的线性关系。据此,建立了核黄素的高灵敏化学发光分析方法,方法检出限为0.007μg/m L,相对标准偏差(n=11)不大于1.6%。利用荧光光谱、化学发光谱对核黄素增强Na HSO3-H2O2体系化学发光的机理进行探讨,为该体系的应用研究提供了新思路。     

流动注射化学发光检测盐酸异丙嗪

在碱性介质中,盐酸异丙嗪对luminol-KMnO4发光体系有显著的增强作用.基于此增强作用,建立了一种FI-CL检测盐酸异丙嗪的新方法.在最优化的实验条件下,盐酸异丙嗪的ΔICL强度与其浓度在7.0×10-9~9.0×10-7 mol/L浓度范围内有较好的线性关系.线性方程为ΔICL=35.19+1.19×10-10 c,相关系数r=0.998 4,检出限为4.9×10-9 mol/L.对7.0×10-9 mol/L的盐酸氯丙嗪标准溶液进行11次平行测定,其RSD为2.4%.盐酸异丙嗪加标回收率在89.1%~96.1%之间.     

氧化锌修饰铅笔芯电极电致化学发光法测定苯酚的研究

采用滴涂法将氧化锌纳米颗粒滴涂在自制铅笔芯电极上制成氧化锌修饰铅笔芯电极,当以过硫酸根为共反应剂时,该修饰电极在氢氧化钠溶液中具有良好的电致化学发光(ECL)行为,对其发光机理进行了考察。基于苯酚对该修饰电极的ECL具有抑制作用,建立了一种测量苯酚的新方法,当苯酚浓度为2×10~(-8)~2×10~(-6)mol/L时,发光强度与苯酚浓度的对数呈线性关系,检出限为1×10~(-8)mol/L。该方法具有灵敏度高、方法简单、快速、稳定性好等优点,将其应用于工业废水中苯酚浓度的检测,回收率为96.5%~104.5%。     

Control of peroxyoxalate chemiluminescence by nitrogen-containing ligand quenching: turning off and on by ligand-metal ion host-guest interactions

The control of peroxyoxalate chemiluminescence (PO-CL) by the coordination of nitrogen-containing ligands and metal cations was investigated. Turning the CL off and on was done by PO-CL using 15-monoazacrown-5-tethered anthracene and alkali metal ions. CL quenching and regeneration was also observed in the separated molecular system of 15-monoazacrown-5 and the fluorophores. CL quenching by a number of ligands bearing dipicolylamino groups was evaluated by these PO-CL reactions and found to be closely related to their oxidation potentials, which is dependent on the Weller rate law for electron exchange and this provides strong support for the existence of the CIEEL PO-CL process. When Zn²⁺ or Cu²⁺ are added to the PO-CL system quenched by the ligand, N-[2-(2,2′-dipicolylamino)ethyl]aniline, CL was turned on because the electron donating ability of the ligands was modulated. This was controlled by the coordination of the studied metal ions and, therefore, this system results in CL because of host-guest interactions.     

Selective chemiluminescence method for monitoring of vitamin K homologues in rheumatoid arthritis patients

Vitamin K is a fat-soluble vitamin involved in blood coagulation and bone metabolism. The detection and monitoring of vitamin K homologues in rheumatoid arthritis (RA) patients is a challenging problem due to the smaller concentrations of vitamin K and the presence of several interfering medications. Therefore, this study aimed to develop a new highly sensitive and selective chemiluminescence (CL) method designated to quantify vitamin K homologues in plasma of RA patients including phylloquinone (PK, vitamin K₁), menaquinone-4 (MK-4, vitamin K₂) and menaquinone-7 (MK-7, vitamin K₂). The method was based on the unique photochemical properties of vitamin K homologues that were exploited for selective luminol CL reaction. The correlation coefficients of 0.998 or more were obtained in the concentration ranges of 0.1-100 ng mL⁻¹ vitamin K homologues. The detection limits were 0.03-0.1 ng mL⁻¹ in human plasma for vitamin K homologues. The developed HPLC-CL system was successfully applied for selective determination of vitamin K homologues in plasma of RA patients. The developed method may provide a useful tool for monitoring vitamin K homologues in different clinical studies such as RA, osteoporosis and hepatocellular carcinoma in which vitamin K is intervented.