Voltammetric and X-ray diffraction analysis of the early stages of the thermal crystallization of mixed Cu,Mn oxides

Mixed Cu,Mn, Cu,Mn,Al, Cu,Mg,Mn, and Cu,Mg,Mn,Al oxides were obtained by calcination of amorphous basic carbonate (Cu,Mn oxides) or hydrotalcite-like precursors at 300–800 °C. The product composition was characterized by chemical analysis, XRD, and voltammetry of the microparticles. The XRD amorphous portion was detected indirectly by XRD and directly by voltammetry. Tenorite (CuO) and spinels were the main crystalline components of the oxide mixtures. The presence of Al shifted the onset of the crystallization of XRD-detectable tenorite and spinel to temperatures higher by 100–200 °C, and the presence of Mg shifted tenorite crystallization by 100 °C, but voltammetry was able to detect these phases even in XRD-amorphous or nanocrystalline calcines. Voltammetry is hence suitable for analysis of poorly crystalline oxides that can be used in heterogeneous catalysis.     

Reaction of dibenzylphosphine oxide with α,β-unsaturated O-methyloximes

The reaction of dibenzylphosphine oxide with O-methyloximes of some ,-unsaturated ketones results in the phosphorylation at the -carbon atom to form methoxyiminophosphine oxides, whereas the reaction of dibenzylphosphine oxide with O-methyloximes of ,-unsaturated aldehydes affords aminodihydrophosphole oxides.     

V2O5/TiO2 Catalytic Xerogels Raman and EPR Studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V₂O₅/TiO₂ catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm^–1 and polymeric vanadates by two broad bands in the region from 900 to 960 cm^–1 and 770 to 850 cm^–1. The Raman spectra do not exhibit characteristic peaks of crystalline V₂O₅. These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V⁴⁺ ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V⁴⁺ ions are located in sites with octahedral symmetry substituting for Ti⁴⁺ ions in the rutile structure. Magnetically interacting V⁴⁺ ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V₂O₅, a partial oxidation of V⁴⁺ to V⁵⁺ is apparent from the EPR results.     

The 1,3-Dipolar Cycloadditions of 3-Arylsydnone-4-Carbonitrile Oxides with Alkenes

3-Arylsydnone-4-carbonitrile oxides may undergo 1,3-dipolar cycloadditions with alkenes to produce the corresponding 3-aryl-4-(5-substituted-isoxazolin-3-yl)sydnones. The direct reaction of 3-arylsydone-4-carbohydroximic acid chlorides with alkenes may also give the same products, and with higher yield.     

Reduced-size polarized basis sets for calculations of molecular electric properties. IV. First-row transition metals

Recent studies of the perturbation-dependent basis sets have indicated the possibility of a significant reduction of the size of the usual CGTO sets without considerable loss of accuracy in calculations of molecular electric properties. The resulting (ZPolX) basis sets have been developed for several atoms of the first and second row of the Periodic Table. The same method of the ZPolX basis set generation is extended for the first-row transition metals and the corresponding contracted ZPolX basis sets of the size [6s5p3d1f] are determined for both nonrelativistic and scalar relativistic calculations. The performance of the ZPolX basis sets is verified in calculations on the first-row transition metal oxides at the level of the ROHF, ROHF/CASPT2, and ROHF/CCSD(T) approximations. Also the study of the dipole polarizability of TiCl₄ confirms the excellent features of these very compact basis sets. The ZPolX basis sets for nonrelativistic and relativistic calculations of molecular electric properties are available on the web page http://www.chem.uni.torun.pl/zchk/basis-sets.html.     

Über Oxide mit dem “Butterfly-Motiv”: Rb6[Fe2O5] und K6[Fe2O5]

New Oxides with the “Butterfly-Motive”: Rb₆[Fe₂O₅] and K₆[Fe₂O₅] Rb₆[Fe₂O₅] and K₆[Fe₂O₅] were obtained for the first time by annealing intimate mixtures of “Rb₆CdO₄” with CdO (molar ratio 1 : 1.1) and KO_0.48 with CdO (molar ratio 5.9 : 1) respectively in closed Fe-cylinders. Determination and refinement of the crystalstructure confirms the space group C2/m (four-circle-diffractometer data). Rb₆[Fe₂O₅]: Ag Kα , 720 out of 1220 Io(hkl), R = 9.68%, R_w = 6.09%; a = 718.9pm, b = 1183.1 pm, c = 695.4pm, β = 95.05°, Z = 2; K₆[Fe₂O₅]: MoKα , 1214 Out of 12141_o(hkl), R = 3.20070, R_w = 2.48%, a = 691.21 pm, b = 1142.78pm, c = 665.50pm, β = 93.82°, Z = 2. The binuclear unit [O₂FeOFeO₂]^6? already known to be planar with oxoferrates(II) now was observed to be angular here and closely related to Na₆[Be₂O₅].     

Preparation and Properties of Nickel and Iron Oxides obtained by Calcination of Layered Double Hydroxides

A constant pH precipitation method has been applied to obtain solids with Ni/Fe molar ratios of 2/1, 3/2, 1/1, 2/3, and 1/2. In all cases, a phase with the hydrotalcite‐like structure is obtained, containing Ni^II and Fe^III in the brucite‐like layers and carbonate in the interlayer, and, for samples with a Ni/Fe molar ratio lower than 2/1, amorphous hydrated iron oxides, undetected by X‐ray diffraction, are also formed. The solids have been characterized by element chemical analysis, powder X‐ray diffraction, differential thermal analysis, thermogravimetric and differential thermogravimetric analysis, FT‐IR spectroscopy, temperature‐programmed reduction and assessment of specific surface area by nitrogen adsorption at ?196 °C. In all cases reduction leads to zero‐valent state for the metals, reduced nickel particles probably favouring reduction of Fe^III species; the specific surface area increases with the iron content, probably due to the amorphous nature of the hydrated iron oxides formed. Calcination at 1200 °C in air leads to well crystallized solids, formed by NiFe₂O₄ spinel and, additionally, rocksalt‐type NiO for Ni/Fe ratios larger than 1/2. In this way, solids with tailored compositions of these two phases can be prepared.     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).