Pulsed reactive crossed beam laser ablation of La0.6Ca0.4CoO3 using O: Where does the oxygen come from?

The composition of thin perovskite films, especially the oxygen content, is a crucial parameter which influences many physical properties, such as conductivity and catalytic activity. Films produced by pulsed laser deposition are normally annealed in an oxygen atmosphere after deposition to achieve a desired oxygen content. In pulsed reactive crossed beam laser ablation, no annealing step is necessary, but a fundamental question regarding this deposition technique is still open: where does the oxygen in the films come from?There are three possibilities, i.e. from the target, from the gas background, or from the gas pulse. To answer this question two experiments were performed: ¹⁸O₂ was used during the deposition process as background gas with ¹⁶O anions in the target and ¹⁶O₂ gas pulse, and a ¹⁸O₂ gas pulse with ¹⁶O from the target and background. These experiments revealed that the quantification of the oxygen origin is only possible, when no oxygen exchange occurs at the deposition temperature. The films are characterized after deposition by elastic recoil detection analysis (ERDA) to determine the ¹⁶O/¹⁸O ratio. Experiments with different oxidizing species in the gas pulse (N₂O and O₂) confirm that the oxidizing potential (N₂O > O₂) as well as the number of molecules are important.     

溶胶-凝胶VO2薄膜转换特性研究

利用溶胶凝胶法在SiO2Si衬底上沉积高取向的V2O5薄膜,在压强低于2Pa,温度高于400℃的条件下,对V2O5薄膜进行真空烘烤,获得了电阻率变化3个数量级以上、弛豫宽度为62℃的VO2多晶薄膜.以X射线衍射(XRD)、扫描电子显微镜(SEM)图和电阻率转换特性等实验结果为依据,详细分析了溶胶凝胶薄膜在真空烘烤时从V2O5向VO2的转化,它经历了从VnO2n+1(n=2,3,4,6)到VO2的过程.实验证明,根据选择合适的成膜热处理条件和真空烘烤条件是实现溶胶凝胶V2O5结构向VO2结构成功转换的关键 关键词： 溶胶-凝胶法 氧化钒薄膜 VO2膜转换特性     

Band bending at the Si(1 1 1)–SiO2 interface induced by low-energy ion bombardment

Experiments employing photoreflectance spectroscopy have uncovered band bending due to electrically active defects at the Si(1 1 1)–SiO₂ interface after sub-keV Ar⁺ ion bombardment. The band bending of about 0.5 eV resembles that for Si(1 0 0)–SiO₂, and both interfaces exhibit two kinetic regimes for the evolution of band bending upon annealing due to defects healing. The healing takes place about an order of magnitude more quickly at the (1 1 1) interface, however, probably because of less fully saturated bonding and higher compressive stress.     

Ab initio study of sodium intercalation into metal oxides

Using the full-potential linearized augmented plane wave (FP-LAPW) method, we have studied the effect of chemistry on the average intercalation voltage (AIV) caused by the Na ions intercalating into transition metal oxides. The effect of transition metal was systematically studied by varying M=Co, Ni and Mn in NaMO₂ and fixing the α-NaFeO₂ layered structure. The effect of the guest atoms into the host material is discussed in terms of the structural and electronic properties. Comparatively to Li intercalation, a significant electron transfer towards transition metal was found. This observation suggests that the transition metal contribute to the AIV determination and confirms the common assumption that intercalated electron reduces M⁴⁺ to M³⁺.     

Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines

Phenethylammonium-based perovskites, which can be regarded as a semiconductor/insulator multiple quantum well consisting of lead halide semiconductor layers sandwiched between phenethylammonium insulator layers were prepared. To investigate the effects of the electronic state and the orientation of organic insulator layers on the optical properties of layered perovskites, fluorine substituted analogues were also prepared. The structure and optical properties were investigated by the XRD, UV–Vis absorption, and fluorescence measurements. The exciton absorption peak was shifted by the substitution of fluorine atoms in organic ammonium compounds. It became clear that the optical properties of two-dimensional perovskite compounds were controlled by the substitution of fluorine atoms.     

Superconductivity and normal state resistivity of Ba0.6K0.4BiO3: an optical phonon approach

We discuss the nature of the pairing mechanism and the physical properties associated with the normal as well as the superconducting state of cubic perovskites Ba_0.6K_0.4BiO₃using the strong coupling theory. An interaction potential which includes the Coulomb, electron–optical phonon and electron–plasmon interactions is developed to elucidate the superconducting state. A model dielectric function is constructed with these interactions fulfilling thef-sum rule. The screening parameter (μ^* = 0.26) infers the poor screening of charge carriers. The electron–optical phonon strength (λ) estimated as 0.98 is consistent with an attractive electron–electron interaction and supports the moderate to strong coupling theory. The superconducting transition temperature of Ba_0.6K_0.4BiO₃is then estimated as 32 K. Ziman's formula of resistivity is employed to analyse and compare this with the temperature-dependent resistivity of a single crystal. The estimated contribution from the electron–optical phonon together with the residual resistivity clearly infers a difference when a comparison is made with experimental data. The subtracted data infer a quadratic temperature dependence in the temperature domain (30 ≤ T ≤ 200 K). The quadratic temperature dependence of ρ [ = ρ_exp − (ρ₀ + ρ_e–ph)] is understood in terms of 3D electron–electron inelastic scattering. The presence of these el–el and el–ph interactions allows a coherent interpretation of the physical properties. Analysis reveals that a moderate to strong coupling exists in the Ba_0.6K_0.4BiO₃system and the coupling of electrons with the high-energy optical phonons of the oxygen breathing mode will be a reason for superconductivity. The implications of the above analysis are discussed.     

电化学超级电容器电极材料的研究进展

回顾了电化学超级电容器电极材料的研究进展，并对不同电极材料的储能原理和性能特点进行了简要的阐述。参考文献29篇。