Lanthanum-based perovskites obtained in molten nitrates or nitrites

Lanthanum-based perovskites, LaMO₃ (where M = Mn, Fe, Co, Ni), have been synthesised from lanthanum precursors and corresponding 3d transition metal salts in molten alkali metal nitrates or nitrites. The reactivity of eight precursors in three molten salts of different basicity was analysed. Single phase orthorhombic LaMnO_3.11, and orthorhombic LaFeO₃ have been obtained in molten NaNO₂ at 723 K, for 2 h. LaCoO₃ is also formed in molten nitrite, but an increase of basicity, by adding Na₂O₂, was necessary to obtain LaNiO₃. The reaction systems were investigated by thermal analysis. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and specific surface area measurements (BET method) were used to characterise the synthesised nanopowders.     

Cesium lead halide perovskite nanocrystals for ultraviolet and blue light blocking

Using cesium lead halide perovskite nanocrystals, CsPb(Cl/Br)_3, as a light absorber, we report a highly effective UV and blue light blocking film. The CsPb(Cl/Br)_3 nanocrystals are well dispersed in the ethyl cellulose(EC) matrix to compose a UV and blue light shielding film, and the absorption edge of the film is tunable by adjusting Cl to Br ratio using anion exchange. The CsPbCl_2 Br-EC film exhibits a transmittance of 5% at 459 nm, 90% at 478 nm and 95% in the range of 500–800 nm, which makes it excellent for UV and blue light shielding. In addition, the as-prepared EC-CsPb(Cl/Br)_3 film shows excellent photostability under UV irradiation. Results demonstrate that this EC-CsPb(Cl/Br)_3 based materials with sharp absorbance edges, tunable blocking wavelength, and high photostability can be useful for the applications in UV and blue light blocking and optical filters     

The effect of a cation radii on structural, magnetic and electrical properties of doped manganites La0.6−xPrxSr0.4MnO3

Structural, magnetic and transport properties of La_0.6−xPr_xSr_0.4MnO₃ with x=0.0, 0.03, 0.06, 0.18, 0.3, 0.42, 0.54 and 0.6 are studied. The system exhibits a rhombohedrally distorted perovskite structure for x?0.3. A rhombohedral-orthorhombic (Pnma) structure transition is detected in the doping range from x=0.42 to 0.6. The structure refinement by Rietveld analysis of the X-ray powder diffraction data shows that the average distance Mn-O increases in the rhombohedral phases and decreases in the orthorhombic phases. Results show that the Curie temperature decreases from 374 to 310 K when 〈r_A〉 varies from 1.254 to 1.231 Å. Electrical measurements show that all samples exhibit a metallic to semiconducting transition with increasing temperature. Meanwhile, the size of the resistivity ρ increases near T_C. This phenomenon is interpreted as a gradual bending of the Mn-O-Mn bond angle, with decreasing 〈r_A〉, which causes the narrowing of the electronic bandwidth and the effect of the A-site variance σ².     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Hydrides with the perovskite structure: General bonding and stability considerations and the new representative CaNiH3

The stability and electronic structure of perovskite hydrides ABH₃ were investigated by means of first-principles density functional calculations. Two types of perovskite hydrides are distinguished: (1) When A and B are alkali and alkaline earth metals, the hydrides are ionic compounds with calculated band gaps of around 2 eV and higher. Their stability trend follows basically the concept of Goldschmidt's tolerance factor. (2) When A is one of the heavier alkaline earth metals (Ca, Sr, Ba) and B a transition metal, stable compounds ABH₃ result only when B is from the Fe, Co, or Ni groups. This stability trend is basically determined by effects associated with d band filling of both the transition metal and the hydride. In contrast to group (1) perovskites, the transition metal-containing compounds are metals. The synthesis of CaNiH₃ and its structure determination from CaNiD₃ is reported. This compound is a type (2) perovskite hydride with a fully occupied hydrogen position (CaNiD₃: a=3.551(4) Å, d_Ni-D=1.776(2) Å). Its stability is discussed with respect to transition metal hydrides with complex anions (e.g., Mg₂NiH₄, Na₂PdH₂, Sr₂PdH₄).     

Magnesium substitution in Nd0.7Sr0.3MnO3

Magnesium substitution in Nd_0.7Sr_0.3MnO₃ has been studied by neutron powder diffraction. Polycrystalline samples of nominal compositions Nd_0.7Sr_0.3Mn_1−yMg_yO₃ with y=0.0, 0.1, 0.2 and 0.3 were synthesized by the standard solid-state reaction method. Rietveld refinements of the neutron powder diffraction data showed that all samples had distorted perovskite structure of orthorhombic symmetry. Mg initially preferred to substitute for Nd and only at Mg concentration greater than 0.1, a substantial substitution for Mn occurred. Our study also showed that Mg-substitution did not change the crystal structure of Nd_0.7Sr_0.3MnO₃.     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.     

A structural study of ternary lanthanide orthoscandate perovskites

Ternary lanthanide scandates (Ln=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, and Ho) have been synthesized at ambient pressure. Their structure has been investigated at room temperature by Rietveld analysis of powder X-ray diffraction data. The Ln-scandates are orthorhombic perovskites, adopting space group Pbnm (? 62), a≈b≈√2a_p, c≈2a_p, Z=4. Heavy lanthanides (Er-Lu), and Y do not form perovskites at ambient conditions. Compositionally driven phase transitions were not observed. The unit-cell parameters decrease with increasing ScO₆ octahedron rotation and atomic number of the Ln cation. In common with lanthanide orthoferrites, the uniform structural evolution is interrupted at the middle-heavy part of the lanthanide sequence. This is probably due to an interplay between: (i) enlargement of the ScO₆ octahedra relative to BO₆ in other perovskites (e.g., FeO₆ in GdFeO₃); (ii) reduction in size of the first coordination sphere of Ln³⁺ coincident with the lanthanide contraction; (iii) coincident expansion of the second coordination sphere due to screening effects of O^I1 on O^I2, and entry of Sc to the lanthanide coordination sphere; (iv) complex mixing between oxygen and lanthanide lanthanide f- and scandium d-orbitals. In the series studied, Ln³⁺ are in eight-fold coordination (tetragonal antiprism), and are considerably displaced from the center of the LnO₈ polyhedron along [001]. Evolution of the crystallochemical characteristics through the Ln orthoscandate series is complex due to both the antipathetic distortions of A- and B-site coordination polyhedra and interaction of the orbitals of oxygen, Ln and Sc. Empirically obtained limits of Goldschmidt and observed ^viiit_o tolerance factors for ternary LnBO₃ compounds adopting the Pbnm structure are 0.795 and 0.841, respectively.     

Structural characterization and physical properties of the system La1.33LixCrxTi2−xO6

New phases which arise from partial substitution of Ti⁴⁺ by Cr³⁺ and Li⁺ of the compound La_2/3TiO₃ have been obtained, giving rise to the series La_1.33Li_xCr_xTi_2−xO₆ (x=0.66, 0.55 and 0.44). These phases adopt a perovskite-type structure as deduced from their structural characterization. Rietveld's analyses of neutron diffraction data show that it is orthorhombic (S.G. Pbnm) with ordered domains. Conductivity has been examined by complex impedance spectroscopy and it increases with increasing lithium and chromium content. These materials behave as mixed conductors with low activation energies. Magnetic susceptibility variation with temperature shows antiferromagnetic interactions at the lowest temperatures.