Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

8-羟基喹啉-5-磺酸纤维微柱分离富集电感耦合等离子体原子发射光谱法同时测定多种痕量元素

本文合成了8-羟基喹啉-5-磺酸纤维滤纸片,以此做为微柱填充物同时富集了10种痕量元素,并分离了样品中的高盐组分.本方法可使痕量组分的分离与富集同步进行,因而特别适用于原子光谱测定前样品的预处理.     

Structure,Chirality, and Formation of Giant Icosahedral Fullerenes and Spherical Graphitic Onions

We describe the topology, structure, and stability of giant fullerenes exhibiting various symmetries (I, I _h , D _2h , T). Our results demonstrate that it is possible to create two new families of nested chiral icosahedral (I) fullerenes namely C₂₆₀@C₅₆₀@C₉₈₀@C₁₅₂₀@, ...,and C₁₄₀@C₃₈₀@C₇₄₀@C₁₂₂₀@ ..., which exhibit interlayer separations of ca. 3.4 Å. These chiral fullerenes are thought to possess metalliclike conduction properties. We discuss in detail the transformation of polyhedral graphitic particles into quasispherical nested giant fullerenes by reorganization of carbon atoms, which result in the formation of additional pentagonal and heptagonal carbon rings. These spherical structures are metastable and we believe they could be formed under extreme conditions, such as those produced by high-energy electron irradiation. There is circumstantial experimental evidence for the presence of heptagonal rings within these spherical fullerenes.     

电化聚合聚吡咯的角分布X射线光电子能谱研究

用角分布Ｘ射线光电子能谱（ＸＰＳ）测试和样品原位加热相结合的方法研究了阴离子是对甲苯磺酸根的电生导电聚吡咯的化学和聚集态结构．其结果表明聚吡咯表面约几个原子层内原子的相对浓度依下述次序递减：Ｃ＞Ｏ＞Ｓ＞Ｎ；导电聚吡咯中的氮原子至少有吡咯氮和氧化态氮两种；在２００℃加热以后聚合物链不受影响，但阴离子向表面迁移，同时氧化态氮大大减少．     

Chelatometric titration of tin in non-ferrous alloys with hedta

A new titrimetric method for determination of tin (4%) in aluminium alloys, tin- and lead-base alloys, solders, white bearing alloys, special bronzes and silver brazing alloys is proposed. HEDTA, Semi-Xylenol Orange and bismuth perchlorate are used as titrant, indicator and back-titrant respectively. Measures are taken to overcome the hydrolysis of Sn(IV). Monochloroacetic acid and ethylene glycol are added as auxiliary agents. The standard deviation of this method was found to be 0.2 mg and its coefficient of variation to vary from 0.25 to 2%, according to amount of tin. A novel method of sample decomposition and a modified method for separating Sn(IV) are also suggested.     

氨基羧酸纤维分离富集-电感耦合等离子体原子发射光谱法测定多种痕量稀土元素

本文制备了氨基羧酸纤维滤纸片作为柱填充物，成功地分离和富集了地化样品中的多种稀土元素。富集后的稀土元素采用电感耦合等离子体原子发射光谱法测定，回收率为90％～109％。本文还对基体干扰及其消除进行了研究。     

Synthesis on the basis of electrogenerated carbenes

A series ofS _N2 reactions with halomethanes as substrates and the corresponding anions as nucleophiles were studied by the semiempirical MNDO and AM1 methods, taking into account solvent effects. Analysis of the kinetics, structures of reagents, intermediates and products, and charge distribution in them allows one to draw the conclusion that the retardation ofS _N2 reactions is stronger in solvents than in the gas phase, and the rates of reactions involving anions with a lower number of halogen atoms are higher.For Part 8 see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2148–2154, November, 1995.This work was partially financially supported by the International Science Foundation (Grant No. MHYOO).     

聚2,6-二甲基苯醚树脂分子量分布及其与冲击强度关系的研究

本工作建立了室温下用凝胶色谱法(GPC)测定聚2,6-二甲基苯醚(PPO)树脂分子量、分子量分布的方法。淋洗剂不采用文献申报道的毒性较大者,也不在较高柱温下进行,而采用甲苯(或氯仿)在室温下测定。对样品在甲苯中溶解温度、浓度和稳定性等都进行了系统研究,找到了最优化条件。GPC数据结合改性PPO(MPPO)产品性能测定结果,经仔细分析找到了影响MPPO产品质量的一个重要因素是PPO树脂中低分子量部分含量。它与产品冲击强度有明显的依赖关系。提出了一个从CPC谱图确定低分子量部分含量的方法。     

温度及pH敏感的树枝状高分子衍生物合成及药物控制释放研究

对合成的系列聚酰胺-胺型(PAMAM)树枝状高分子进行端基的羟基化和氯乙酰化两步修饰,使PAMAM最外层接上烷基氯.以修饰产物为引发剂,通过原子转移自由基引发甲基丙烯酸N,N-二甲氨基乙酯(DMAEMA)聚合得到树枝状PAMAM高分子衍生物,并对其结构用FTIR、1H-NMR和粒径分析进行了表征.紫外可见分光光度仪测定证实此高分子具有温度及pH敏感性.通过对小分子药物控制释放研究表明,此树枝状高分子衍生物通过环境pH值可有效地控制小分子药物的释放.     

Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.