FRET based selective and ratiometric ‘naked-eye’ detection of CN in aqueous solution on fluorescein–Zn–naphthalene ensemble platform

We have developed a FRET-based ratiometric fluorescent probe for the detection of CN⁻ using a fluorescein–Zn–naphthalene ensemble (NFH·Zn²⁺). The sensing mechanism was ascribed by displacement approach. The chemosensor exhibits high selectivity and sensibility for CN⁻. The speculation was supported by fluorescence emission spectra, UV–vis spectrum, ¹H NMR titration experiments, and mass spectra. The interconversion of probe NFH and NFH·Zn²⁺ via the complexation/decomplexation by the modulation of Zn²⁺/CN⁻ mimics INHIBIT gate. In addition, it also shows an excellent performance in ‘dip stick’ method.     

A novel colorimetric and “turn-on” fluorescent sensor for selective detection of Cu2+

In this work, a new highly selective and sensitive fluorescent sensor for detecting Cu²⁺ was developed based on rhodamine fluorophore. It displayed strong fluorescence “turn-on” effect upon addition of Cu²⁺, and possessed the function of naked eye recognition. The fluorescence enhancement also enabled the sensor to quantitatively analyze Cu²⁺ due to the formation of a stable 1:1 metal–ligand complex in a short time, and the complex possesses relatively good pH stability. In addition, the density functional theory calculations were adopted to investigate the molecular orbitals as well as the spatial structure. Simultaneously, the cell imaging and zebra fish experiments provided a broader application prospect in biological system.     

基于联合分步APIT定位算法的改进

本文研究了无线传感网络( Wireless Sensor Network,WSNs)的节点定位问题,并针对APIT由于锚节点在低密度环境下的节点误判和节点失效等问题给出了改进,在APICT定位算法的基础提出了联合分步定位算法UNION-APICT(Union Approximate Point-In-Circumcircle Test),该算法是结合连通性的测距技术,RSSI测距技术以及质心定位和APICT等技术,来联合解决对未知节点定位问题。通过仿真实验结果表明,改进后的UNION-APICT在APICT算法的基础之上平均定位误差减少了10%-25%,定位性能有了明显的提升;随着通信半径R和最大探测距离rmax的增加,定位误差也在逐渐减小,该算法较APIT和APICT定位算法在锚节点密度、节点覆盖率和定位精度上都有所提高。     

同型二聚体肽模型的二维红外光谱

利用一个同型二聚体模型,甲酰胺二聚体,模拟一对肽基团.用量子化学从头计算考察了二聚体中酰胺-I带振动模式之间的振动耦合及其在空间的行为. 研究发现C=O伸缩振动耦合以静电作用为主,耦合有效距离能超过10 oA. 一维和二维红外光谱的激子模拟计算表明,耦合常数的空间依赖性能够清楚地表现在光谱特征中. 这些结果意味着多肽中C=O伸缩振动模式能够在很远的距离相互耦合并产生振动态的离域化.     

Temperature and humidity behaviour of a corona based smoke sensor

Ionization smoke sensors are amongst the best smoke sensors; however, the little radioactive source that they include is no longer desirable since recycling gets more complicated. In this paper we discuss an electrostatic system in which corona phenomena is used to generate the ions needed to smoke detection. We show how the velocity of ions is reduced in our system for a better interaction between smoke and drifting ions. Influence of smoke, temperature and moisture is studied. It is shown that the proposed sensor has a good sensitivity compared with conventional ionic and optical smoke sensors.     

基于6LoWPAN技术的气体环境监控系统

针对日趋严重的大气污染问题,提出了一种基于6LoWPAN技术的大气环境监测方案。通过IPv6通信协议组建的6LoWPAN星型网络,能够实现大规模传感控制网络,解决了IPv4 地址枯竭、各厂商协议不统一等问题。各个PAN采集到的数据通过路由器发送给监控终端,使用Labview为开发平台进行数据汇总后实现对环境中有害气体的实时监控,并通过以太网进行数据共享。实验结果表明,该系统数据采集准确无误,并对环境污染起到了预防作用,可保证社会的可持续发展。     

基于光纤锥级联结构的湿度传感器

提出了一种基于普通单模光纤粗锥级联结构的马赫-曾德尔干涉湿度传感器.将两根单模光纤对芯熔融成一个粗锥,并依次级联,形成光纤锥-单模光纤-光纤锥-单模光纤-光纤锥结构.外界环境湿度、温度的改变使传感器的纤芯基模和包层模的光程差发生改变,引起传感器干涉光谱发生变化.通过监测干涉谱波长和能量的变化实现对外界物理量的测量.实验结果表明,当空气中湿度在35~95%RH范围内变化时,传感器的湿度灵敏度为-0.065dB/%RH,线性度为0.997;当温度在30~80℃范围内变化时传感器的温度灵敏度为69.4pm/℃,线性度为0.998.该传感器可以避免温湿度的交叉影响,实现单参量的同时在线区分测量.     

基于荧光强度比值法可用于现场测量的低成本聚合物光纤温度传感器

基于荧光强度比值法,设计了一种使用两种荧光染料的光纤温度传感器.实验中,罗丹明B和罗丹明110分别为对温度敏感和对温度不敏感的荧光传感物质,利用聚合物光纤来传导激发光及接收荧光.由于两种染料的荧光谱峰相距60 nm,因此容易将二者对应的荧光谱分开.通过确定能代表两种染料的最优荧光光谱范围,获得具有良好线性度的温度-荧光强度标定曲线.实验研究了不同浓度的荧光染料对标定曲线的影响,当染料浓度为0.3 g/L时,可获得0.28℃的最小均方误差及0.0128/℃的灵敏度.此外,该传感器还具备一定的抗光源扰动和抗荧光染料漂白的能力.     

基于柔性碳纳米管压阻膜的无线加速度检测系统

通过对加速度检测的重大意义进行分析,得出了加速度检测仪的价值和意义,介绍了本系统的设计思路和应用前景。传感器采用了基于纳米技术的碳纳米管薄膜感应前端,拓宽了传感器设备的研发领域,同时应用无线传感技术,使系统进一步实用化。最后介绍了本系统的实验情况,以及具体应用的效果。     

基于STC89C52单片机的测速计设计

介绍了一种通过霍尔传感器采集数据,使用89C52单片机对信号进行计数的测速计,可以实现测转速、超速报警和调速的功能。该设计具有功耗低,价格低廉,可移植性高等优势。