热处理对超疏水性含氟丙烯酸酯共聚物膜表面性能的影响

以微乳液聚合法和溶液聚合法制备丙烯酸全氟烷基乙基酯和甲基丙烯酸甲酯的共聚物, 以1,1,2-三氟三氯乙烷为溶剂, 采用溶剂挥发成膜法直接制备出超疏水膜, 并研究120 ℃热处理对超疏水膜表面性能的影响. 对于用乳液聚合方法制备的超疏水膜, 随着热处理时间的延长, 滚动角表现出先逐渐增大直至完全不能滚动, 然后重新回复到极小滚动角的特殊变化过程, 而静态接触角只是略微减小, 完全不同于热处理对平滑的含氟聚合物表面接触角的影响. 扫描电镜结果显示, 聚合物膜表面形貌对应出现从微/纳复合粗糙结构到微孔粗化并重新形成微/纳复合多层粗糙结构的变化.     

pePC-SAFT: Modeling of polyelectrolyte systems: 1. Vapor–liquid equilibria

A molecular thermodynamic model for polyelectrolyte systems—called pePC-SAFT—is proposed. The effect of charged monomers within the polyelectrolyte chain is explicitly taken into account in the reference term by replacing the hard-chain contribution of the PC-SAFT model by a charged-hard-chain contribution. Moreover, counterion condensation is accounted for to determine the effective number of charges along the polyion as well as of free counterions. The electrostatic contribution of the free counterions is described by a Debye–Hückel term.     

Mimicking “nascent” Cu(0) mediated SET‐LRP of methyl acrylate in DMSO leads to complete conversion in several minutes

Cu(0) was prepared via disproportionation of Cu(I)Br in the presence of Me₆‐TREN in various solvents in a glove box. The resulting nanopowders were used as mimics of “nascent” Cu(0) catalyst in the single‐electron transfer living radical polymerization (SET‐LRP) of methyl acrylate (MA), providing faster polymerization than any commercial Cu(0) powder, Cu(0) wire, or Cu(I)Br and achieving 80% conversion in only 5 min reaction time. Despite the high rate, a living polymerization was observed with linear evolution of molecular weight, narrow polydispersity, no induction period, and high retention of chain‐end functionality. In addition to providing an unprecedentedly fast, yet controlled LRP of MA, these studies suggest that the very small “nascent” Cu(0) species formed via disproportionation in SET‐LRP are the most active catalysts. Thus, when bulk Cu(0) powder or wire may be the most abundant catalyst and dictates the overall kinetics, any Cu(0) produced via disproportionation will be rapidly consumed and contributes to the overall catalytic cycle. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 403–409, 2010     

Pressure–volume–temperature data and surface tension of blends of poly(ethylene oxide) and poly(methyl acrylate) in the melt

The pressure–volume–temperature behavior of miscible blends of poly(ethylene oxide) (PEO) and poly(methyl acrylate) (PMA) was studied over extended ranges of temperature and pressure. From pressure–volume–temperature data, the reduction parameters for the Flory‐Orwoll‐Vrij equation‐of‐state were determined. It was found that reduction parameters as well as density, thermal expansion coefficient, and isothermal compressibility vary with composition in a nonlinear manner. The surface tension of the blends in the molten state was measured over the whole composition range using the sessile drop method. The surface tension was found to display negative deviation from additivity pointing toward a remarkable surface excess of PMA. Moreover, surface tension displays a minimum in the range of low PEO content at weight fraction of ～0.19. In addition, the temperature coefficient of surface tension shows negative deviation from linearity. It stays constant when PMA is in excess. Results are discussed in terms of equation‐of‐state thermodynamics. The minimum of surface tension can be well explained by weak self‐association of PEO in the bulk. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1893–1900, 2010     

微波促进立体选择性合成烯丙酸酯类高碳糖衍生物

在微波促进下, 利用酮糖(1)及糖酸内酯(4)与叶立德(2, Ph₃PCHCOOEt)的Wittig反应, 立体选择性地合成了糖基烯丙酸酯类化合物(3和5), 反应效率显著提高, 反应时间由原来的20 h缩短为10 min; 并且研究了不同反应溶剂对反应立体选择性的影响. 提供了一种高效、 简便合成含有烯丙酸酯类高碳糖衍生物的方法.     

NaA分子筛膜蒸汽渗透促进丙烯酸/乙醇的酯化反应

以对甲苯磺酸为催化剂,利用亲水性NaA分子筛膜蒸汽渗透过程,选择性地将丙烯酸和乙醇酯化反应产物中的水原位分离出反应器,打破反应平衡限制,使反应不断向右进行,反应15 h丙烯酸转化率达到100%。     

磷钨酸催化合成丙烯酸丁酯

用磷钨酸为催化剂 ,由丙烯酸和丁醇直接酯化合成了丙烯酸丁酯。研究了醇 /酸比、酯化时间、催化剂用量、带水剂用量对酯化率的影响 ;选择了最佳反应条件 ,重复反应酯化率达到 95 %以上。     

酸处理对制备中空乳胶粒子的影响

聚苯乙烯;酸处理对制备中空乳胶粒子的影响;形态;丙烯酸丁酯;中空结构乳胶粒子;甲基丙烯酸;共聚物     

紫外光引发LDPE膜接枝含氟丙烯酸酯的研究

通过紫外光引发表面接枝聚合反应的方法 ,把含氟丙烯酸酯单体R 5 6 1 0引到LDPE薄膜上 .对经丁酮抽提后的接枝膜进行FTIR、ESCA、SEM和DSC等表征 ,证实含氟聚合物以化学键的方式接枝在LDPE基体膜上 .在一定范围内 ,增加紫外光强、引发剂和单体浓度以及反应温度等均有利于提高接枝率 .经计算R 5 6 1 0的紫外光引发接枝聚合反应总活化能为 5 4 2kJ mol.接枝膜的接触角随着接枝率的提高逐步增大 ,直至趋于恒定 .作者提出接枝膜存在一个在接触角测定时影响基体膜与探测水滴相互作用过程的边界层 .当接枝率较低、接枝层厚度小于边界层临界厚度时 ,基体LDPE影响接触角的大小 ,但随着接枝率提高 ,接枝层逐渐变厚 ,氟聚合物层对接触角的贡献逐渐占优势 ,导致接触角随之增大 .当接枝率超过一定值以后 ,接枝层厚度超过边界层临界厚度 ,接枝层对接枝膜的接触角起全部贡献 ,接触角测定值随之稳定     

Translucent nanolatexes through emulsion polymerisation of ethyl acrylate

Turbid emulsion systems of ethylacrylate/sodium dodecyl sulphate/water with monomer to surfactant (M/S) ratios 10 and 40 were transformed into stable transparent/translucent nanolatexes through emulsion polymerisation using potassium persulphate as an initiator. The latex particle size was observed to be similar to that obtained by true microemulsion polymerisation where M/S ratio is one. The kinetic plots exhibited two intervals upto M/S ratios 10. AIBN initiated systems showed separation of two phases for the M/S ratio ?10. M/S ratios were varied from 1 to 54 for the comparative study of polymerisation in emulsion and microemulsion media. Gel effect dominance was observed around 40-60% conversion for the microemulsion polymerisation of ethylacrylate. Only one chain per particle was observed for microemulsion system with M/S ratio 1 and three to four chains per particle were observed for the systems with M/S ratios 10 and 40. Unlike M/S=1 system, higher dependency of polymerisation rate on initiator concentration was observed for the systems with M/S=10 and 40. A possible mechanism for such a transformation has been proposed.