石墨炉原子吸收法中热解涂层石墨管在无标准分析法测定环境样品中铬的应用

本文探讨了热解涂层石墨管测定铬的最佳实验条件,研究了各种酸和干扰物质的基体效应,提出用浓氨水为基体改进剂克服高氯酸的干扰。比较了各原子化温度时的理论和实验特征量。使热解涂层石墨管有可能用于无标准分析法测定各种环境样品中的铬。     

电热蒸发进样—等离子体原子发射光谱中钒和钛的蒸发机理研究

自1974年Nixon报道钽丝电热蒸发作为ICP-AES进样技术以来,这一技术已引起了人们的极大兴趣,受到越来越广泛的重视。电热蒸发(ETV)-ICP-AES是一种将蒸发和激发分步进行的联用技术。石墨是目前普遍使用的蒸发器材料。然而,在高温下某些元素和石墨材料可以发生碳化反应,形成热稳定的碳化物,使分析物蒸发不完全或根本不蒸发,从而影响分析结果的灵敏度和准确性。为了解决这一问题,我们曾提出了以聚四氟乙烯(PTFE)悬浮体为氟化剂,氟化辅助ETV-ICP-AES直接测定粉煤标样中钒和钛的新方法,其检出限     

Study of transition metal oxide doped LaGaO3 as electrode materials for LSGM-based solid oxide fuel cells

Transition metal oxide doped lanthanum gallates, La_0.9Sr_0.1Ga_0.8M_0.2O₃ (where M=Co, Mn, Cr, Fe, or V), are studied as mixed ionic-electronic conductors (MIECs) for electrode applications. The electrochemical properties of these materials in air and in H₂ are characterized using impedance spectroscopy, open cell voltage measurement, and gas permeation measurement. Three single cells based on La_0.9Sr_0.1Ga_0.8 Mg_0.2O₃ (LSGM) electrolyte (1.13 to 1.65 mm thick) but with different electrode materials are studied under identical conditions to characterize the effectiveness of the lanthanum gallate-based MIECs for electrode applications. At 800 °C, a single cell using La_0.9Sr_0.1- Ga_0.8Co_0.2O₃ as the cathode and La_0.9Sr_0.1Ga_0.8Mn_0.2O₃ as the anode shows a maximum power density of 88 mW/cm², which is better than that of a cell using Pt as both electrodes (20 mW/cm²) and that of a cell using La_0.6Sr_0.4CoO₃ (LSC) as the cathode and CeO₂-Ni as the anode (61 mW/cm²) under identical conditions. The performance of LSGM-based fuel cells with MIEC electrodes may be further improved by reducing the electrolyte thickness and by optimizing the microstructures of the electrodes through processing. Received: 9 January 1998 / Accepted: 1 May 1998     

石墨炉原子吸收法直接测定高温合金中硅

研究了混合基体改进剂，灰北、原子化温度以及共存元素的干扰，采用镧和钙作混合基体改进剂后，硅的灵敏度提高，抗干扰能力增强，可以用石墨炉原子吸收直接测定高温合多中硅。方法特征量为０．２ｎｇ，检出限为２．３μｇ／ｇ，对于含硅量为４００μｇ／ｇ左右的合金样品，相对标准偏差为５％左右，回收率在９０％－１１０％之间。     

微圆盘电极上耦合—级均相反应的稳态电流

在电极袭面反应物浓度均匀的近似假设下,得到了微圆盘电极上暂态可逆反应的一般解.然后利用该一般解得到了微圆盘电极上耦合一级均相反应的可逆电极反应CE、EC、EC′和ECE 的稳态电流计算公式.     

平台蒸发溴化铟分子吸收光谱法测定痕量溴的研究

本文对 InBr 分子吸收光谱法测定溴进行了研究。使用平台大大降低了 InO 背景吸收,使信-背比增大十倍。铟先于溴进样可提高 InBr 吸收信号。铬空心阴极灯可代替氘灯作为测定光源。方法灵敏度为8.5ng/0.0044吸收。     

组合电化学--电化学研究中的新策略

组合电化学是一种新的电化学研究策略，通过设计和构建大量多样性的电极阵列，并对其进行高通量筛选和表征，快速、高效地实现了体系的电化学研究。本文综述了近年来进行的组合电化学研究，重点介绍了组合光学筛选方法、组合电化学合成方法以及电化学平行筛选方法，并探讨了各种方法的优势和存在的问题。     

氢化物发生石墨炉原位富集直接测定高温镍基合金中碲

通过选择碲的氢化物发生条件，克服了高含量镍对碲的干扰，把氢化物富集在涂钯石墨管里，然后再原子化，成功地测定了高温镍基合金中碲。     

Zeta-potentials of self-assembled surface micelles of ionic surfactants adsorbed at hydrophobic graphite surfaces

The zeta-potentials of the self-assembled surface ionic surfactants (sodium dodecyl sulfate—SDS and hexadecyltrimethyl ammonium bromide—CTAB) on graphite surfaces were determined both from streaming potential and electrophoretic mobility measurements. The adsorption of the surfactants at graphite–liquid interfaces has been studied using atomic force microscopy (AFM) soft-contact imaging which shows the formation of linear, parallel hemicylinders with headgroups oriented towards the solution. The magnitude of the zeta-potential increased with an increase in surfactant concentration, reaching a constant value at a concentration corresponding to the point of surface micelle formation as confirmed from AFM imaging. The streaming potential and electrophoretic mobility measurements showed that the zeta-potentials of SDS and CTAB surface micelles adsorbed at the graphite surface were about −75 and +70 mV, respectively, well in agreement with the values reported for bulk phase micelles in the literature.     

单晶电极表面研究中的超高真空技术

阐述了超高真空和电化学联合技术的性能,这种技术是获取电极-溶液界面微观信息的一种手段.给出了有关样品制备和表面分析技术在实验中的方方面面,并选取了一些单晶电极表面研究的最近成果--电化学池中重构的Au(100)-hex和Pt(100)-hex单晶电极的相转变以及Pt在Ru(0001)和Ru(1010)表面,RuO2(100)在Ru(0001)上外延生长的结构研究.