Characterization and kinetic performance of 2.1 × 100 mm production columns packed with new 1.6 μm superficially porous particles

The overall kinetic performance of three production columns (2.1 mm × 100 mm format) packed with 1.6 μm superficially porous CORTECS‐C₁₈+ particles was assessed on a low‐dispersive I‐class ACQUITY instrument. The values of their minimum intrinsic reduced plate heights (h_min = 1.42, 1.57, and 1.75) were measured at room temperature (295 K) for a small molecule (naphthalene) with an acetonitrile/water eluent mixture (75:25, v/v). These narrow‐bore columns provide an average intrinsic efficiency of 395 000 plates per meter. The gradient separation of 14 small molecules shows that these columns have a peak capacity about 25% larger than similar ones packed with fully porous BEH‐C₁₈ particles (1.7 μm) or shorter (50 mm) columns packed with smaller core–shell particles (1.3 μm) operated under very high pressure (>1000 bar) for steep gradient elution (analysis time 80 s). In contrast, because their permeabilities are lower than those of columns packed with larger core–shell particles, their peak capacities are 25% smaller than those of narrow‐bore columns packed with standard 2.7 μm core–shell particles.     

Visible‐Light‐Induced Generation of H2 by Nanocomposites of Few‐Layer TiS2 and TaS2 with CdS Nanoparticles

Graphene analogues of TaS₂ and TiS₂ (3–4 layers), prepared by Li intercalation followed by exfoliation in water, were characterized. Nanocomposites of CdS with few‐layer TiS₂ and TaS₂ were employed for the visible‐light‐induced H₂ evolution reaction (HER). Benzyl alcohol was used as the sacrificial electron donor, which was oxidized to benzaldehyde during the reaction. Few‐layer TiS₂ is a semiconductor with a band gap of 0.7 eV, and its nanocomposite with CdS showed an activity of 1000 μmol h^?1 g^?1_. The nanocomposite of few‐layer TaS₂, in contrast, gave rise to higher activity of 2320 μmol h^?1 g^?1, which was attributed to the metallic nature of few‐layer TaS₂. The amount of hydrogen evolved after 20 and 16 h for the CdS/TiS₂ and CdS/TaS₂ nanocomposites was 14833 and 28132 μmol, respectively, with turnover frequencies of 0.24 and 0.57 h^?1, respectively.     

Facile deposition of cobalt oxide based electrocatalyst on low-cost and tin-free electrode for water splitting

Facile deposition of a water-splitting catalyst on low-cost electrode materials could be attractive for hydrogen production from water and solar energy conversion. Herein we describe fast electrodeposition of cobalt-based water oxidation catalyst(Co-WOC) on simple graphite electrode for water splitting. The deposition process is quite fast, which reaches a plateau in less than 75 min and the final current density is～1.8 mA/cm2under the applied potential of 1.31 V at pH = 7.0. The scanning electron microscopy(SEM) study shows the formation of nanometer-sized particles(10-100 nm) on the surface of the electrode after only 2 min and micrometer-sized particles(2-5 μm) after 90 min of electrolysis. X-ray photoelectron spectroscopy(XPS) data demonstrate the as-synthesized ex-situ catalyst mainly contains Co2+and Co3+species incorporating a substantial amount of phosphate anions. These experiments suggest that cost-efficient cobalt oxide materials on graphite exhibit alluring ability for water splitting, which might provide a novel method to fabricate low-cost devices for electrochemical energy storage.     

Raman spectra of proton order of thin ice Ih film

The polarized Raman spectra of the upper part of a thin ice Ih film were obtained in the range of 150 cm⁻¹ to 3800 cm⁻¹. The spectra showed clear polarization dependence; several new peaks were also observed. The longitudinaloptic–tranverseoptic (LO–TO) splitting of the mode near 220 cm⁻¹ in the translational vibration region was experimentally confirmed at 133 K. The Fermi resonance between the bending overtone (around 3270 cm⁻¹) and symmetry stretching fundamental (around 3350 cm⁻¹) in the stretching vibration region appeared at nearly the same temperature. Results showed that ice XI (i.e. proton‐ordered phase of ice Ih) slowly formed in the upper part of a thin ice Ih film without KOH as the temperature gradually decreased below 133 K. Copyright © 2015 John Wiley & Sons, Ltd.     

单原子催化剂在电化学中的研究进展

目前单原子催化剂的研究呈现爆发式增长, 已然成为材料科学和催化领域的明星材料和研究热点. 前期报道的单原子催化剂研究主要针对某一个应用方向进行探讨, 较少研究催化剂的双功能或多功能应用. 近年来, 为了拓展单原子催化剂在更多领域和方向的应用, 具有双功能甚至多功能的单原子催化剂的设计开发备受关注. 本文综合评述了近年来具有双功能活性的单原子催化剂的研究进展, 重点介绍了其在电化学领域中的最新应用研究. 最后, 对具有双功能活性的单原子催化剂发展研究中存在的问题进行了简要分析, 并对未来发展前景进行了展望.     

硫化钴装饰BiVO4光阳极提升其光电化学水分解性能

太阳能驱动的光电化学(PEC)水分解可以有效地将太阳能转化为化学能,作为解决环境排放和能源危机最具前景的途径之一,已经引起了科学界的广泛关注.PEC水分解系统由两个半反应组成:在光阳极上的析氧反应(OER)和光阴极上的析氢反应(HER).PEC系统的太阳能转化效率主要由光阳极/电解质界面的OER过程所决定,这是一个非常复杂且涉及质子偶联的多步四电子转移过程.钒酸铋(BiVO₄)是应用于PEC水分解的典型且具有实际应用前景的光阳极材料之一.然而,由于不良的表面电荷转移、电荷在光阳极/电解质结面处的表面复合以及缓慢的OER动力学等因素,导致BiVO₄的PEC性能受到严重限制.本文开发了一种新颖有效的解决方案,以低成本、高电导率和具有快速电荷转移能力的硫化钴装饰来提升BiVO₄光阳极的PEC活性,X射线多晶衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等表征,研究结果表明CoS成功装饰于BiVO₄表面.采用紫外-可见吸收光谱(UV-VisDRS)研究了BiVO₄和复合光阳极CoS/BiVO₄的光学性质,结果表明,与纯的BiVO₄相比,CoS/BiVO₄光阳极在可见光范围内光吸收能力有所增强.将制备的BiVO₄和CoS/BiVO₄光阳极应用于PEC分解水实验中,结果表明,相对于1.23 V可逆氢电极,在光照下,CoS/BiVO₄光阳极的光电流密度显著提升,可高达3.2 m Acm^-2,是纯BiVO₄的2.5倍以上.与纯BiVO₄相比,CoS/BiVO₄光阳极的起始氧化电位显示出负向偏移0.2 V,表明析氧过电势得到有效减小.入射光子转换效率(IPCE)测试结果表明,CoS/BiVO₄光阳极的入射光子转换效率在500 nm之前的可见光范围内得到明显提升,其中,CoS/BiVO₄的IPCE值在380 nm处达到最大.此外,由于CoS的装饰作用,CoS/BiVO₄光阳极的电荷注入效率和电荷分离效率均得到较大的提升,分别达到75.8%(相较于纯BiVO₄光阳极的36.7%)和79.8%(相较于纯BiVO₄光阳极的66.8%).电化学阻抗谱(EIS)测试结果表明,通过CoS的装饰,CoS/BiVO₄光阳极的界面电荷转移电阻得到有效降低,证明其界面电荷转移动力学得到有效提升.光致发光光谱测试结果表明,CoS的装饰显著提高了BiVO₄的光生电子-空穴对的分离效率,进一步证明BiVO₄表面的CoS装饰在其PEC分解水中起着非常积极的作用.本文为通过表面修饰设计应用于PEC水分解的有效的光阳极提供了新思路.     

太阳能光催化分解水制氢※

利用太阳能光催化分解水制氢是解决能源环境问题并实现太阳能有效转化和储存最有前途的技术之一, 这一“圣杯”式反应经过几十年不懈努力取得了诸多重要研究进展. 本文将综述光催化分解水制氢体系的基本概念、活性测试方法与注意事项、光催化材料种类等; 并从光催化分解水制氢的光吸收、光生电荷分离和表面催化反应等基本过程和关键科学问题的角度总结其重要研究进展, 最后对于太阳能光催化分解水制氢的挑战和潜在的发展方向进行分析和展望. 希望通过本综述的简要介绍能让刚从事光催化分解水制氢研究的青年科技人员清晰地了解掌握该领域的一些基本概念、操作规范、研究总体进展和现状等.     

High-entropy transition metal chalcogenides as electrocatalysts for renewable energy conversion

High-entropy transition metal chalcogenides (HE-TMCs) are advantageous in electrocatalytic applications compared to other entropy-stabilized systems owing to the greater orbital extension and energetic match of p-orbitals in chalcogenides with d-orbitals of the transition metals providing additional space to tailor their electronic structure. The high-configurational entropy of HE-TMCs leads to stabilization of cubic rock salt, wurtzite-type and hexagonally packed 2D structures. Due to the multi-element nature of HE-TMCs, the synergy among different elements results in tunable d- and p-band positions. As a consequence, the adsorption energies of electrocatalytic reaction intermediates can be tailored to enhance catalytic performance in water splitting and CO₂ reduction. Furthermore, the entropy-stabilized disordered microstructural state of the material endows HE-TMCs with improved corrosion resistance. Despite recent advances in HE-TMC electrocatalysis, challenges such as identification and synthesis of efficient HE-TMCs as well as the identification of catalytically active sites and reaction mechanisms on HE-TMCs remain to be investigated.     

Defects-engineered tailoring of tri-doped interlinked metal-free bifunctional catalyst with lower gibbs free energy of OER/HER intermediates for overall water splitting

Controllable tailoring of metal-free/carbon-based nanostructures tends an encouraging way to enhance the bifunctional activity of electrodes, but a great challenge owing to the sluggish kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, a facile tempted-defects assisted fractionation strategy is presented to synthesize N, S, and O tri-doped metal-free catalyst (DE-TDAP). Due to this effective tempted-defects and heteroatoms interlinking in DE-TDAP, it delivers the lowest overpotential toward both the OER (346 mV) and HER (154 mV) at 10 mA cm^?2. Remarkably, the DE-TDAP-electrode carries only a cell voltage of 1.81 V at 10 mA cm^?2 for overall water splitting and long-term stability. Considerably, the density functional theory (DFT) calculation exposes that the tailored-defects in tri-doped interlinking could enhance bifunctional catalytic performance devising from lower Gibbs free energy of OER/HER intermediates on active sites. This struggle henceforth provides a perceptive understanding of the synergetic principles of heteroatom-interlinking-tailoring nanostructures in water splitting.     

Comprehensive and High-throughput Electrolysis of Water and Urea by 3–5 nm Nickel and Copper Coordination Polymers

Metal-organic coordination polymers (CP) have attracted the scientific attention for electrochemical water oxidation as it has the similar coordination structure like natural photosynthetic coordinated complex. However, the harsh synthesis conditions and bulky nature pose a major challenge in the field of catalysis. Herein, 3–5 nm CP particles synthesized at room temperature using aqueous solutions of Ni²⁺/Cu²⁺ and 2,5-dihydroxyterepthalic acid as precursor were applied for alkaline water and urea electrolysis. The overpotential required is only 300 mV at 10 mA cm⁻² by Nano-Ni CP for water oxidation, with turnover frequency (TOF) of 21.4 s⁻¹ which is around 8 times higher than its bulk-counterpart. Overall water and urea splitting were achieved with Nano-Cu (−) ∥ Nano-Ni (+) couple on Ni foam at 1.69 and 1.52 V to achieve 10 mA cm⁻², respectively. High electrochemical surface area (ECSA), high TOF, and enhanced mass diffusion are found to be the key parameters responsible for the state-of-the-art water and urea splitting performances of nano-CPs as compared to their bulk counterparts.