A Sensor for Serotonin and Dopamine Detection in Cancer Cells Line Based on the Conducting Polymer−Pd Complex Composite

An electrochemical sensor based on the conducting polymer composite with a palladium complex (Pd(C₂H₄N₂S₂)₂) was developed for the detection of serotonin and dopamine simultaneously in the breast cancer cell and human plasma samples. The proposed sensor was fabricated using the Pd(C₂H₄N₂S₂)₂ complex‐anchored poly2,2 : 5,2‐terthiophene‐3‐(p‐benzoic acid) (pTBA) layer on the AuNPs decorated reduced graphene oxide (AuNPs@rGO) substrate, which revealed the enhanced anodic current of the target species. The sensor probe was characterized by electrochemical and surface analysis methods. The experimental parameters affecting the sensor performance were optimized, in terms of AuNPs@rGO concentration, the number of electropolymerization cycle for pTBA, immobilization time of Pd(C₂H₄N₂S₂)₂, and pH. The dynamic ranges for serotonin and dopamine were obtained from 0.02 to 200 μM, and from 0.1 to 200 μM with the detection limit of 2.5, and 24.0 nM, respectively. The reliability of proposed sensor was evaluated using cancer cell lines for the clinical applications.     

Fabrication of Electrochemical Sensor Based on CeO2−SnO2 Nanocomposite Loaded on Pd Support for Determination of Nitrite at Trace Levels

Here, an electrochemical sensor based on CeO₂‐SnO₂/Pd was prepared and used for highly selective and sensitive determination of nitrite in some real samples. This nanocomposite was characterized by various methods like X‐ray photoelectron spectroscopy, X‐ray diffraction, energy dispersive spectroscopy, Fourier‐transform infrared spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry. The results showed excellent catalytic property of the nanocomposite as a an electrocatalyst for nitrite oxidation. In the following, the experimental parameters affecting the analytical signal for nitrite were optimized. Under the optimal conditions, the limit of detection and sensitivity of the sensor were calculated as 0.10 μM and 652.95 μA.mM^?1.cm^?2, respectively. Also, the response of the sensor was linear in the range of 0.36 to 2200 μM of nitrite. Finally, some of the inherent features of the sensor such as repeatability, reproducibility and stability were examined after evaluation of the sensor selectivity in the presence of several interfering species.     

Remediation of azo-dyes based toxicity by agro-waste cotton boll peels mediated palladium nanoparticles

The present study reports an environmental benign route for the synthesis of palladium nanoparticles (Pd NPs) using agro-waste empty cotton boll peels aqueous extract for the first time. Surface Plasmon Resonance (SPR) band in absorption spectrum of Pd NPs at 275 nm confirmed the formation of Pd NPs by using UV–Vis spectroscopy. Crystalline nature of Pd NPs was confirmed by powder XRD analysis. Size and morphology was studied by transmission electron microscopy (TEM). The cotton peels extract acted as a source of phytochemicals which primarily reduced Pd⁺² to Pd⁰ nanoparticles (Pd NPs) and imparted stability of Pd NPs by surface capping. The characteristic functional groups of phytochemicals in extract and capped Pd NPs surfaces were identified by FT-IR analysis. Catalytic activity of the synthesised Pd NPs was checked against reduction of hazardous azo-dyes such as Congo red, Methyl orange, Sunset yellow and Tartrazine with NaBH₄ as electron donors. Pd NPs catalysed reduction of all azo-dyes by NaBH₄ in aqueous medium was monitored by UV–visible spectroscopy where Pd NPs mediated transfer of electrons from NaBH₄ to azo-dyes as carrier. The synthesized Pd NPs acted as a good catalyst and could be a promising material in degrading toxic azo-dyes from industrial effluents and wastewater.     

In Situ Dispersion of Palladium on TiO2 During Reverse Water–Gas Shift Reaction: Formation of Atomically Dispersed Palladium

The application of single‐atom catalysts (SACs) to high‐temperature hydrogenation requires materials that thermodynamically favor metal atom isolation over cluster formation. We demonstrate that Pd can be predominantly dispersed as isolated atoms onto TiO₂ during the reverse water–gas shift (rWGS) reaction at 400 °C. Achieving atomic dispersion requires an artificial increase of the absolute TiO₂ surface area by an order of magnitude and can be accomplished by physically mixing a precatalyst (Pd/TiO₂) with neat TiO₂ prior to the rWGS reaction. The in situ dispersion of Pd was reflected through a continuous increase of rWGS activity over 92 h and supported by kinetic analysis, infrared and X‐ray absorption spectroscopies and scanning transmission electron microscopy. The thermodynamic stability of Pd under high‐temperature rWGS conditions is associated with Pd‐Ti coordination, which manifests upon O‐vacancy formation, and the artificial increase in TiO₂ surface area.     

Dye removal,antibacterial properties,and morphological behavior of hydroxyapatite doped with Pd ions

Hydroxyapatite (HAP) containing different contents of palladium (Pd) ions were synthesized using the co-precipitation method. The structural and morphological properties of the as-synthesized compositions were investigated using XRD and FESEM. The c/a increased from 0.728 to 0.733 with the lowest and highest contributions of Pd(II), respectively. Furthermore, the morphological features were investigated using FESEM. It was illustrated that Pd-HAP was formed as agglomerated as rod shapes with dimensions in the range of 63.4–110.3 nm for no Pd additions, and the size was reduced reaching 43.4–70.5 nm for the highest Pd contribution. Besides, the maximum height of the roughness (R_t) grew from 183.6 up to 236.5 nm for the lowest and highest Pd(II). Besides, the obtained specific surface area was around 28.3, 42.0, and 63.4 m²/g for 0.0Pd-HAP, 0.6Pd-HAP, and 1.0Pd-HAP, respectively. The antibacterial activity was examined against both Escherichia coli (E-coli) and Staphylococcus aureus (S. aureus), and it obvious that the activity was enhanced upon Pd content. The inhibition zone was increased from no sensitivity reaching 4.3 ± 0.9 and 4.5 ± 0.8 mm for no Pd and the highest one, respectively. The removal efficiency of dyes was examined for methylene blue (MB) and it was shown that after 120 min of irradiation, the removal efficiency reached around 86.4% for the highest contribution of Pd. The pseudo-first-order constant (K_app) increased from 0.0032 to 0.0179 min⁻¹. The recyclability of Pd-HAP denoted that removal efficiency decreased to 5.65, 8.14, 6.24, 8.76, and 10.2% for different contents of Pd(II) after 6 cycles.     

快凝Pd82Si18合金原子团簇的演化特性及遗传机制

采用分子动力学(MD)模拟计算,对Pd82Si18合金快凝过程中基本原子团簇的遗传特性、演化趋势和结构稳定性进行了研究.团簇类型指数法(CTIM)分析表明:非晶固体中Si原子为中心的(102/14418/1551)双帽阿基米德反棱柱(BSAP)团簇数目占据优势.快凝过程中,BSAP结构团簇具有最大的遗传分数,并且其他以Si原子为中心的Kasper团簇大多都会向BSAP结构团簇转变.通过对Si原子为中心的Kasper基本团簇电子性质第一性原理计算发现,体系中BSAP团簇的结合能最低,结构稳定性较高,与分子动力学计算结果一致.     

Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

In this article, we report a facile approach for the synthesis of an inexpensive catalyst of bimetallic Hg/Pd alloys comprising nanoparticles with various structures using a unique ultrasonic reaction that is conducted without the use of any reducing agent. The nanoparticles of Hg/Pd alloys (HgPd and Hg₂Pd₅) were achieved for the first time by sonicating an aqueous solution of Palladium (II) nitrate with metallic liquid mercury, as evidenced by XRD. EDS further confirmed the presence of Pd and Hg elements in the alloy. The surface morphology and structure of the nanoparticles have been systematically investigated by HRSEM, HRTEM and SAED pattern. In order to explore the catalytic activity of the as-synthesized nanoalloys, the catalytic reduction of 4-nitrophenol and a few other nitrophenol derivatives were investigated. Excellent catalytic activity was obtained for Hg/Pd (1:1) alloy, and the rate constant for the reduction of 4-NP with Hg/Pd at room temperature was found to be 58.4 × 10⁻³ s⁻¹, which is possibly the highest ever reported. The catalyst exhibited superior stability and reusability when compared with those reported in the literature for other catalysts based on noble metals.     

二茂铁咪唑盐的合成及其在Suzuki-Miyaura反应中的应用

合成了硫醚官能化、膦官能化及未官能化的二茂铁咪唑盐,并研究了以其作为N-杂环卡宾配体前体对Pd催化的Suzuki-Miyaura偶联反应的影响,发现在4-甲基溴苯与苯硼酸偶联反应中以膦官能化的配体对催化性能提高有利,而硫醚官能化不利于催化性能提高。     

Regioselectivity Study on Propylene Polymerization Catalyzed by Neutral Salicyladiminato Pd（Ⅱ） Model Complex with DFT Method

Many attempts have been made to control the regioselectivity for olefin polymerization by varying the structures of ligands in catalysts. The regioselectivity of propylene polymerization was investigated by replacing a nitrogen atom in the Pd(Ⅱ) diimine catalyst with an oxygen atom from density functional theory method at the B3LYP/LANL2DZ level. The results show that the 1,2-insertion becomes a rival mechanism to the 2,1-insertion when the nitrogen atom is replaced by the oxygen atom leading to an asymmetric environment in the catalyst, and that the steric effect in the asymmetrical catalyst plays an important part in the polymerization. The insertion barrier from 2-O is much higher than that from 2-N. A pyramid transition state was characterized for the catalyst to convert 2-O back to 2-N through internal rotation. The propylene prefers to coordinate at the opposite side of O in the catalyst. This is the driving force for the internal rotation.The results are significant for isotactic and syndiotactic polymerization.     

制备温度对Pd/C加氢脱氯催化剂失活的影响

制备温度对Pd/C加氢脱氯催化剂失活的影响;失活;积炭;Pd/C;加氢脱氯