Flotation separation and electrothermal atomic absorption spectrometric determination of lead in water samples

Abstract

The application of macro- and micro-electrodes constructed using the new ionophore were tested in a range of solution compositions reflecting concentrations found in fresh waters, and containing Cl^?, NO₃ ^?, SO₄ ^2-, HCO₃ ^2-, H₄SiO₄ and a natural humic acid. The inhibition of the electrode responses to these ions was quantified using a mixed-solution method by optimising the agreement between the measured potentials and predictions from the Nicolsky-Eisenman equation. In addition, measurements were made in separate solutions of KC1 to enable results to be compared with the literature. Apart from the results obtained for humic acid, mean selectivity coefficients for 16 macro- and 21 micro-electrode experiments are given. The results indicate inhibition of the electrode response to phosphate for all the anions in the concentration ranges of 0.05–1 mM Cl^?, 0.1–1.0 mM NO₃ ^?, 0.1–10.0 mM HCO₃ ^? and 0.1–1.5 mM SO₄ ^2- with high selectivity for HPO₄ ^2- in the presence of both dissolved silicon and a standard humic acid. This means that the application of the electrodes to hard waters is impracticable although studies of soft waters and laboratory studies in controlled conditions, e.g. calcium phosphate precipitation experiments, are feasible.     

Studies on PNPP Hydrolysis Catalyzed by Divalent Metal Ion Macrocyclic Schiff Base Complexes in Micellar Solution

Two transitional metal ion macrocyclic Schiff base complexes, NiL and CuL were synthesized and characterized, and the metallomicelles made up of the nickel(II) and copper(II) complexes and surfactants(LSS, Brij35, CTAB), as mimic hydrolytic metalloenzyme, were used in catalytic hydrolysis of carboxylic ester (PNPP). The analysis of specific absorption spectrums of the hydrolytic reaction systems indicates that key intermediates, made up of PNPP and Ni(II) or Cu(II) complexes, have formed in the reaction processes of the PNPP catalytic hydrolysis. In this, based on the analytic result of specific absorption spectrum, the mechanism of PNPP catalytic hydrolysis has been proposed; a kinetic mathematical model, applied to the calculation of the kinetic parameter of PNPP catalytic hydrolysis has been established on the foundation of the mechanism proposed; the acid effect of reaction system, structure effect of the complexes, effect of temperature and effects of micelle on the rate of PNPP hydrolysis catalyzed by the complexes also have been discussed.     

Synergistic Effect of Oxalate and Ethylene Glycol on the Formation of SnO2 Rods

SnO₂ rods have been synthesized by using tin (II) chain‐like complexes as precursors in which oxalate and ethylene glycol act as co‐ligands. On the basis of experimental analysis, a reasonable formation mechanism of rods is discussed, which is further supported by Fourier transform infrared spectroscopy (FT‐IR). These results show that the synergistic effect of oxalate group and ethylene glycol plays an important role in the formation of long SnO₂ rods.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Solid-phase extraction and preconcentration of trace Pb(II) from water samples with folic acid modified silica gel

A chelating matrix prepared by immobilising folic acid on silica gel-bound amine phase was used as a new solid-phase extractant. This sorbent has been developed only for preconcentration of trace Pb(II) prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions were investigated by batch and column procedures. The optimum pH value for the separation of Pb(II) on the new sorbent was 4.0. The adsorbed Pb(II) was quantitatively eluted by 2.0?cm³ of 0.5?mol?dm^?3 of HCl. Common coexisting ions did not interfere with the separation and determination of Pb(II). The maximum static adsorption capacity of the sorbent under optimum conditions was found to be 69.23?mg?g^?1 for Pb(II). The detection limit of the method defined by International Union of Pure and Applied Chemistry was 0.28?ng?cm^?3. The relative standard deviation (RSD) of the method was lower than 2.0% (n?=?8). The developed method has been validated by analysing certified reference materials and successfully applied to the determination of Pb(II) in water samples with satisfactory results.     

Preparation of sinapinaldehyde modified mesoporous silica materials and their application in selective extraction of trace Pb(II)

A new solid phase extractant, sinapinaldehyde (SA) modified SBA-15 mesoporous silica, was developed for selective extraction and preconcentration of trace Pb(II) from aqueous solutions. The successful immobilization of SA on SBA-15 and the strong interaction between SA-SBA-15 and Pb(II) were characterized and confirmed by FTIR spectroscopy and scanning electron microscopy. Parameters such as solution pH, shaking time, eluent condition and sample volume were optimized so that the maximum removal of Pb(II) from solution could be achieved. At pH 4.0, the maximum adsorption capacity of the sorbent for Pb(II) was found to be 33.6?mg?g^?1 and the adsorbed Pb(II) could be completely eluted using a mixed solution of 2?M HCl and 5% CS(NH₂)₂. Some common metal ions such as K(I), Na(I), Mg(II), Ca(II), Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) did not interfere with the adsorption of trace Pb(II). The detection limit of the present method was found to be 1.3?ng?mL^?1 and the relative standard deviation was less than 2.0% (n?=?8). These results suggested that this new sorbent is very efficient and selective for the removal of trace Pb(II) in water samples.     

Two-stage latexes of polystyrene acrylates

ABSTRACT

The modification of decomposition rate of the potassium persulfate initiator during the synthesis of “two-stage latexes” polystyrene-ethyl acrylate (EtA) of butyl acrylale (BuA) and of 2-ethylhexyl acrylate (EHA) is studied. This rate is minimum for BuA and maximum for EHA, in good agreement with the value of solubility parameters. The appearance of poryacrvlaf.es determines the existence of water bonded to the polar polymer. The amount of water bonded increases in the sequence PEtA?PBuA?PEHA, function of the modification of the diameters of the particles resulted from the latexes obtained.     

Marine Sediments and Snow from Ross Sea Region (Antarctica) Dating by 210Pb Method

Abstract

²¹⁰Pb is widely used to determine accumulation rates in order to obtain a time scale in environmental samples. The most accurate method uses the determination of ²¹⁰Pb via its grand-daughter ²¹⁰Po by alpha spectrometry. Unfortunately this method requires a complex wet-chemistry procedure to achieve the separation of ²¹⁰Po from its matrix. In this work a simplified procedure for the chemical separation of ²¹⁰Po is proposed and applied to three marine sediment cores and a 10 m snow core collected in Antarctica. The calculated sedimentation rates for marine sediments range from 0.053 to 0.071 cm y^?1. The mean annual accumulation rate for the snow is 16.6 cm y^?1 w.e. A comparison with literature data in the same region is given.