Electrodeposition of mercury film on electrodes modified with clay minerals

A new type of carbon paste electrode modified with clay mineral and covered with a mercury film is presented in this work. Electrodeposition of the mercury film was performed on the carbon paste electrode modified with montmorillonite. The mercury film was deposited by both electrodeposition in situ and a preliminary electrodeposition. The pre-deposited film of mercury showed to be suitable for anodic stripping voltammetry. An open-circuit sorption of Cd, Pb, and Cu with subsequent anodic stripping voltammetry exhibited higher current responses of metals. Besides the enhanced sensitivity superior separation of the current responses during a simultaneous stripping of metals is expected to be achieved by means of the newly prepared electrode. Presented at the 57th Congress of Chemical Societies, Tatranské Matliare, 4–8 September 2005.     

GRECP/MRD‐CI calculations on the Hg atom and HgH molecule

Multireference single‐ and double‐excitation configuration interaction (MRD‐CI) calculations of transition energies for the Hg atom and spectroscopic constants for the HgH molecule are carried out with the generalized relativistic effective core potential (GRECP) method. A new selection criterium for the reference configurations is discussed. The calculated spectroscopic constants are compared with experimental data and results of calculations of other groups. Improvement of accuracy is mainly observed for bond lengths from the GRECP/MRD‐CI calculations (without applying the T = 0 correction) with respect to the results of other groups. Analysis of the quality of the approximations employed is carried out. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Selective Electrocatalytic Hydrogenation of trans-2-Allyl-6-methyl(allyl, phenyl)-1,2,3,6-tetrahydropyridines on the Nickel and Copper Cathodes

It is shown that the electrocatalytic hydrogenation (ECH) of trans-2-allyl-6-R-1,2,3,6-tetrahydropyridines (R = Me, All, Ph) on a nickel cathode (Ni_disp/Ni) in 40-% aqueous DMF in the presence of excess AcOH yields products of total hydrogenation of all double bonds—relevant trans-2-propyl-6-R₁-piperidines (R₁ = Me, Pr, Ph). Selective hydrogenation of terminal double bonds of allyl substituents in piperideines under study with the retention of the intracycle double bond may be realized on a copper cathode (Cu_ann), provided the stoichiometric ratio between AcOH and the initial substance is observed exactly. In either case, at points of maximum selectivity of ECH processes, the ratio c _AcOH/c _ini = n+ 1, where nis the number of hydrogenated bonds. The difference in the ECH mechanisms on the Cu_ann and Ni_disp/Ni cathodes is discussed. The results of hydrogenation of the trans-2-allyl-6-R-1,2,3,6-tetrahydropyridines at the Cu_ann and Ni_disp/Ni cathodes confirm the general character of regularities discovered earlier during ECH of citral.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Some neutral three-coordinate complexes of mercury(II) halides and pseudohalides with N-methylnicotinamide

Coordination compounds of mercury(II) chloride, bromide, cyanide and thiocyanate with N-methylnicotinamide, a potentially bidentate ligand, have been prepared. The complexesisolated have 1∶1 (metal:ligand)stoichiometry. Molecular weight measurements in molten camphor indicate that the mercury (II) chloride and bromide complexes are monomeric. Based on conductance values, molecular weight determinations and infrared spectral data, it is inferred that in the solid state in all these complexes the metal ion has a coordination number three and is bonded to the N-methylnicotinamide via its pyridine ring nitrogen, and is terminally bonded to the halogen/pseudohalogens.     

A novel method for determination of magnesium in urine and water samples with mercury film-plated carbon paste electrode

A square wave adsorptive stripping voltammetric (SWAdSV) method for the indirect determination of trace amounts of magnesium with thiopentone sodium (TPS) as an electroactive ligand, at carbon paste mercury film electrode (CP-MFE) is proposed. It is observed that the increase of the square wave voltammetric cathodic peak current of TPS, under alkaline conditions, is linear with the increase of Mg concentration. Under optimum experimental conditions viz.; pH 10.75, 3×10⁻⁵ M TPS and 0.05 M phosphate buffer (Na₂HPO₄-NaH₂PO₄), a linear relation in the range 6×10⁻⁹ to 9×10⁻⁸ M Mg²⁺ (0.14-2.16 ppb), at 60 s deposition time, is obtained. The detection limit of Mg²⁺ is 0.14 ppb for 60 s deposition time with the relative standard deviation is 0.5% (n=5). The proposed method was successfully applied to the determination of magnesium in urine and tap water samples with satisfactory results. The data obtained are compared with the standard flame atomic absorption spectrophotometric method (FAAS).     

Elimination of SAS Interferences in Catalytic Adsorptive Stripping Voltammetric Determination of Cr(VI) by Means of Fumed Silica

In the work the procedure of chromium(VI) determination by catalytic adsorptive stripping voltammetry (CAdSV) with application of fumed silica, is presented. Two variants of the method are proposed: in the first fumed silica is put directly to the electrolytic cell containing tested solution, in the second the silica is shaken with the sample and next centrifuged. The effectiveness of many surface‐active substances removal from synthetic solutions as well as natural water samples, is studied. In the experiments the fumed silica (Sigma‐Aldrich) of the specific surface area in the range 200–390 m² g^?1 was used. Two types of the working electrodes were applied, i.e., hanging mercury drop electrode (HMDE) and cyclic renewable mercury film electrode (Hg(Ag)FE). In the silica presence i) the relative standard deviation (RSD) for 0.1 μg L^?1 Cr(VI) is <2% (HMDE) and <5% (Hg(Ag)FE), n=7, ii) the detection limits estimated deposition time 20 s were respectively 14 ng L^?1 (HMDE) and 22 ng L^?1 (Hg(Ag)FE). The accuracy of the method was tested by studying the recovery of Cr(VI) from spiked natural water samples.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.     

铜锌超氧化物歧化酶(Cu2Zn2SOD)在汞电极上的吸附研究

金属氧化还原蛋白质的电化学行为作为生物电化学领域中一个重要的研究内容,受到了广泛的关注犤1～3犦,生物体系一些重要的反应均与基本电荷运动有关,如生物催化、神经传导、光合作用以及呼吸作用等均涉及到一些重要氧化还原蛋白质的氧化还原过程。利用电化学的基本原理和实验方法,不但能在生命体系和有机组织的整体水平上,更主要是能在分子和细胞水平上研究氧化还原蛋白质体系中的电子转移以及氧化态转化的化学本质和规律。铜锌超氧化物歧化酶(Cu2Zn2SOD)是一个二聚体,由两个等同的亚单位组成,每一个亚单位含有咪唑桥联的铜?和锌?离子,催…     

Mercury Speciation in Fish by High-Performance Liquid Chromatography (HPLC) and Post-Column Ultraviolet (UV)-Photochemical Vapor Generation (PVG): Comparison of Conventional Line-Source and High-Resolution Continuum Source (HR-CS) Atomic Absorption Spectrometry (AAS)

An ultraviolet-photochemical generator (UV-PVG) capable of post-column on-line transformation of both organic and inorganic mercury species to cold vapor (Hg⁰) with subsequent detection by quartz tube-atomic absorption spectrometry (QT-AAS) was developed. Mercury(II), methylmercury(I), ethylmercury(I), and phenylmercury(I) were successfully detected after separation by reversed-phase high-performance liquid chromatography (RP-HPLC). Two types of AAS detectors were compared. The first was a commonly used line-source instrument while the second was a high-resolution continuum source (HR-CS) AAS. The latter provided better limits of detection: 0.47?µg?L^?1 for Hg(II), 0.84?µg?L^?1 for methylmercury(I), 0.80?µg?L^?1 for ethylmercury(I), and 2.0?µg?L^?1 for phenylmercury(I). The repeatability at 30?μg?L^?1 was 3.6%, 4.1%, 6.2%, and 4.5% for these species (n?=?10). These figures of merit were comparable with those reported for more sensitive atomic fluorescence spectrometry. Nine sample extraction procedures were investigated. Extraction by tetramethylammonium hydroxide and HCl at 75?°C was selected as the only method compatible with the proposed separation and detection steps providing high extraction efficiency and no changes in mercury speciation. The applicability of the proposed high-performance liquid chromatography–ultraviolet-photochemical vapor generation–quartz tube-atomic absorption spectrometry method was demonstrated using fish samples and certified reference materials (CRM) DOLT-4 (dogfish liver) and ERM-CE464 (tuna fish). The results were comparable to those obtained by a reference method based on L-cysteine extraction and high-performance liquid chromatography–inductively coupled plasma-mass spectrometry (HPLC–ICP-MS) determination.