Measuring powder flowability with a modified Warren Spring cohesion tester

The measurement of powder flowability is a major concern for most industrial processes that deal with the handling of bulk solids as raw materials,intermediates,or products.The development of devices that measure the flowability of non-aerated powders has not progressed as rapidly as might have been hoped since most research activities have been based on various types of shear testers intended to aid the design of hoppers.A new flowability indicator named as weighted cohesion (WS) is established using newly...     

Synthesis of CuCorePtShell Nanoparticles as Model Structures for Core–Shell Electrocatalysts by Direct Platinum Electrodeposition on Copper

The synthesis of Cu(core)Pt(shell) model catalysts by the direct electrochemical deposition of Pt on Cu particles is presented. Cu particles with an average diameter of 200 nm have been deposited on glassy‐carbon electrodes by double pulse electrodeposition from a copper sulfate solution. Subsequent deposition from a platinum nitrate solution under potential control allows for a high selectivity of the Pt deposition towards Cu. Using a combination of cyclic voltammetry, XPS and sputtering, the structure of the generated particles has been analyzed and their core–shell configuration proven. It is shown that the electrocatalytic activity for the oxygen reduction is similar to that of other PtCu catalyst systems. The synthesized structures could allow for the analysis of structure–activity relations of core–shell catalysts on the way to the simple and controlled synthesis of supported Cu(core)Pt(shell) nanoparticles as oxygen reduction catalysts.     

离子液体电沉积CuInxGa1-xSe2薄膜

采用循环伏安法(CV)对离子液体Reline中三元CuCl₂+InCl₃+SeCl₄体系和四元CuCl₂+InCl₃+GaCl₃+SeCl₄体系的电化学行为进行了研究。研究表明,In³⁺并入三元CIS(Cu-In-Se)薄膜体系和Ga³⁺并入四元CIGS(Cu-In-Ga-Se)薄膜体系均有两种途径：一是发生共沉积,二是直接还原。利用电感耦合等离子体发射光谱(ICP)和扫描电镜(SEM)对沉积电势、镀液温度和主盐浓度对CIGS薄膜组成、镀层表面形貌的影响进行了测试,结果表明通过工艺参数的选择可以控制Ga/(Ga+In)和CIGS薄膜组成并得到化学计量比为Cu_1.00In_0.78Ga_0.27Se_2.13的薄膜。     

The electrocatalytic behavior of electrodeposited Ni–Mo–P alloy films towards ethanol electrooxidation

Ternary Ni–Mo–P thin films have been electrodeposited from citrate‐based electrolyte onto graphite substrates for application as anode catalysts for ethanol electrooxidation. The operating deposition parameters were optimized to produce Ni–Mo–P alloy films of outstanding catalytic activity. The phase structure of the deposits was evaluated employing X‐ray diffraction technique. Morphology and chemical composition of the deposited alloy films were studied using scanning electron microscopy and energy‐dispersive X‐ray analysis, respectively. The results demonstrated that the rate of Ni–Mo–P deposition increases with increasing the ammonium molybdate concentration in the plating electrolyte up to 10 g l^?1. Also, the amount of Mo in the deposits increases with increasing the ammonium molybdate concentration up to 7.5 g l^?1, and the maximum Mo content in the film was 9.1 at.%. The catalytic activity of Ni–Mo–P/C alloy films has been evaluated towards electrooxidation of ethanol in 1.0 M NaOH solution by using cyclic voltammetry and chronoamperometry. The catalytic performance of the prepared anodes as a function of the amount of Mo was studied. The results showed an increase in the oxidation peak current density of ethanol with increasing the Mo at.% in the deposited alloy films. Additionally, Ni–Mo–P/C electrodes displayed significantly improved catalytic activity and stability towards electrooxidation of ethanol compared with that of Ni–P/C electrode. Copyright © 2013 John Wiley & Sons, Ltd.     

Functional silver nanostructured surfaces applied in SERS and SIMS

Present article deals with functionality of silver nanostructured surfaces prepared by potentiostatic electrochemical deposition on the paraffin impregnated graphite electrode as template‐free substrates. The effect of the electrodeposition conditions on two silver surface functions: analytical signal enhancement in Surface‐enhanced Raman spectroscopy and pre‐ionization function, applied in secondary ion mass spectrometry (SIMS) is reported. Functional silver nanostructured substrate was prepared at a potential ?850 mV with a deposition duration of 20 min. Analytical signal enhancement factors of 3.2 ×10⁵ for Raman peak at 649 cm^?1, 3.0×10⁵ for peak at 810 cm^?1 and 2.7×10⁵ for peak at 1539 cm^?1 were determined for Rhodamine 6G at deposited surface. Slight pre‐ionization effect has been observed in SIMS, and 1.2×10⁵ fold signal enhancement was established for fragment of Rhodamine 6G with m/z 429 (M‐CH₃‐Cl). Electrochemical preparation of nanostructures represents a step towards surface integration directly into miniaturized systems and sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Continuous Spectroscopy Characterization of Emulsions

In emulsion polymerization, the formation of particles has an important effect on the rate of reaction and on the final properties of the latex. To investigate particle nucleation mechanisms in emulsion polymerization it is necessary to establish the initial conditions of the emulsified system before the reaction takes place. This research reports on a technique to continuously monitor the droplet size distribution of liquid-liquid emulsions using spectroscopy. The on-line particle characterization methodology is based on an integrated sampling and dilution strategy combined with spectroscopy methods. It is shown that the sampling system integrated with a multiwavelength turbidity detector provides reliable estimates of droplet populations as function of the dispersed phase concentration in emulsions of saturated hydrocarbons. The results provide not only the groundwork necessary for the elucidation of particle nucleation during emulsion polymerization process but also suggests the potential of this combined technology to further our understanding of liquid-liquid emulsions.     

Contact Angle Measurement for Dispersed Microspheres Using Scanning Confocal Microscopy

Abstract

Scanning confocal microscopy was used for contact angle measurement of individual microspheres. The measurements were carried out by using different laser‐scanned layers of the particle floating on the air–water interface. The ratio of the diameter for the cross‐section of the protruded area of the particle at the air–water interface to the actual diameter of the particle is used for contact angle measurements. Two systems, i.e., glass and polystyrene microspheres with diameters of 3–10 and 6 µm, respectively, with water were used for this investigation (this size range of particles are most relevant to inhalation applications). Using the developed methodology, contact angles of 27° and 41° were measured (with water) for glass and polystyrene particles, respectively. The theoretical error in contact angle measurement for the developed methodology is determined to be generally about 1° with a maximum of 3° for contact angle of particles ranging from 2 to 24 µm in size; the experimental error was 4–6°. The contact angles of glass and polystyrene particles were compared to those obtained from pendant drop method and confirmed.     

浅海波导界面对点源振速方向的影响

采用“虚源法”分析计算了浅海波导环境中接收点处点源总振速方向与水平面夹角,侧重讨论确定性界面反射对总振速方向的影响。研究结果表明：总振速方向和接收点与声源的水平距离、两者深度,海底、海面特性以及声速剖面等有关。在等声速均匀浅海波导中,由于确定性界面反射的影响,当直达声掠射角为1°～50°时,合成总振速方向偏离直达声方向达1.5°～10.5°,声速剖面呈负梯度时,偏离程度更甚.     

光静态散射测试系统的研究与实现

随着科学技术的发展,对粒子的大小、浓度及其他特性的探测已经发展成为一个专门的研究领域和现代测量学中的一个重要分支,而光散射法已经成为一种常用的粒子测量方法。为了满足应用需求,文中提出了一种基于C8051F500单片机的光静态散射测试系统方案,详细介绍了该测试系统的设计理论原理、硬件电路的设计依据、固件程序的设计思想和测试系统的具体实现。选取一定浓度的样品溶液,运用该系统进行光散射的角度依赖性测试,实际测量值与理论依据基本相符;在不同激光功率下,对同一角度的散射光强进行测试,将测量得到的数据分析,线性度良好,满足设计要求。     

Destructive Effect of an α‐Particle on TEX

By computational studies it was found that interaction of an α‐particle with TEX (an explosive molecule having a cage structure) disturbs the molecular skeleton dramatically. As the α‐particle exerts its positive electrostatic field, the C–C bond between the dioxalane rings present in TEX breaks down forming the dication of TEX. The calculation were done within the constraints of the density functional theory at the level of B3LYP using various bases sets, mainly 6‐31++G(d,p).