PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

Analytical procedures for quantification of peptides in pharmaceutical research by liquid chromatography–mass spectrometry

Peptide quantification by liquid chromatography–mass spectrometry (LC–MS) combines the high resolving power of reversed-phase (RP) chromatography with the excellent selectivity and sensitivity of mass spectrometric detection. On the basis of comprehensive practical experience in the analysis of small molecules, pharmaceutical research is developing technologies for analysis of a growing number of peptidic drug candidates. This article is a detailed review of procedures based on LC–MS techniques for quantitative determination of peptides. With the focus on pharmaceutical applications several technologies for sample preparation, various aspects of peptide chromatography, important characteristics of ESI–MS, selectivity of MS-detection modes, the large variability of internal standards, and modern instrumentation are discussed. The demand for reliable, robust, sensitive, and accurate methods is discussed using numerous examples from the literature, complemented by experiments and results from our laboratory.     

偏最小二乘光度法同时测定铜和铁的研究及应用

７－（１－苯偶氮）－８－羟基喹啉－５－磺酸钠在ＰＨ＝４．７５ＨＡｃ－ＮａＡｃ缓冲溶液中能与Ｃｕ（Ⅱ）和ＦＥ（Ⅲ）形成稳定的络合物，本文研究了Ｃｕ（Ⅱ）－ＰＡＨＱＳ、Ｆｅ（Ⅲ）－ＰＡＨＱＳ体系的显色条件，以偏最小二乘法处理两者重叠吸收峰，建立了光度法同时测定铜和铁的方法。     

Spectrophotometry Determination of Cobalt after Extraction of its Ternary Complex with 3-(4-Phenyl-2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine and Tetraphenylborate into Molten Naphthalene

The reaction of 3-(4-phenyl-2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PPDT) and tetraphenylborate (TPB) with cobalt (II) has been studied to determine the optimum conditions for the extraction and quantitative spectrophotometry determination of this metal. The ternary complex is extracted into molten naphthalene at pH 3.6–7.4. The solid naphthalene containing the cobalt associated complex is separated by filtration and dissolved in acetonitrile. Beer's law is obeyed in the concentration range 8–140 μg cobalt in 10 ml of acetonitrile solution. The molar absorptivity and sensitivity are 4.2×10³ l·mol^?1·cm^?1 and 0.01408 μg/cm², respectively. The other factors such as pH, amounts of reagents and naphthalene, shaking and standing times, and the effect of diverse ions are studied. The method has been applied to the determination of cobalt in iron steel alloys.     

Comparison of adsorbents for on-line solid-phase extraction of polycyclic aromatic hydrocarbons before liquid chromatography with UV detection

Summary On-line solid-phase extraction (SPE) coupled with reversed-phase liquid chromatography and UV detection at 254 nm has been used for the determination of trace-level polycyclic aromatic hydrocarbons (PAH) in soil extracts. Five commercially available adsorbents (C₈, C₁₈, PLRP-S, PRP-1, and Bond-Elut Env) were evaluated. Results showed that recovery of the PAH decreased with increasing molecular weight, because of their poorer solubility. Recovery of high-molecular-weight PAH was significantly improved by addition of 10% (v/v) acetonitrile to the sample before loading of the SPE adsorbent. PAH recovery ranged from 64.0 to 108% when a 50 mL sample spiked with 1 μg L⁻¹ was applied to these adsorbents. Determination of PAH was possible with detection limits below 0.05 μg L⁻¹, which corresponds to 0.2 μg kg⁻¹ soil. The method was successfully used to determine PAH in soil extracts.     

Separation and determination of metals as complexes of 1-nitroso-2-naphthol-6-sulphonic and 2-nitroso-1-naphthol-6-sulphonic acids

A sensitive ion-pair liquid-liquid extraction-spectrophotometric method has been developed for the determination of copper, palladium, iron and cobalt, based on the formation of metal complexes with 1-nitroso-2-naphthol-6-sulphonic acid or 2-nitroso-1-naphthol-6-sulphonic acid as primary ligand, and zephiramine as counter-ion. The coloured metal complexes obtained over different pH ranges are easily and quantitatively extracted into dichloromethane. The method has been tested with samples containing known amounts of copper, palladium, iron and cobalt in ultrapure water. The reagents provide a sensitive spectrophotometric method for determining these metals.     

Ga^3＋的新萃取体系的界面特性和胶团化作用研究

研究了Ｇａ~（３＋）协萃体系（Ｇａ~（３＋）－Ｄ_２ＥＨＰＡ－Ｈ_２ＭＰＡ－正十二烷－Ｈ_２ＳＯ_４）的界面吸附和胶团形成热力学，发现该萃取体系中［Ｈ_２ＭＰＡ］影响Ｄ_２ＥＨＰＡ和Ｈ_２ＭＰＡ的界面吸附性质。在中、高［Ｈ_２ＭＰＡ］范围内Ｄ_２ＥＨＰＡ与Ｈ_２ＭＰＡ的界面吸附行为相反，Ｄ_２ＥＨＰＡ的存在也影响Ｈ_２ＭＰＡ的界面吸附行为。研究了界面张力与各因素关系的数学模型，并获得某些胶团形成和界面吸附特性的物化参数。     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

分散固相萃取结合气相色谱-高分辨质谱快速筛查酱油中多种氯丙醇

建立了酱油中1，3-二氯-2-丙醇、2，3-二氯-1-丙醇、3-氯-1，2-丙二醇和2-氯-1，3-丙二醇的分散固相萃取-气相色谱-高分辨质谱快速筛查检测方法。样品采用乙酸乙酯提取，提取液浓缩后经N-丙基乙二胺净化，气相色谱-高分辨质谱测定，内标法定量。结果表明，该方法对于酱油中4种氯丙醇的定量限为0.5~10 μg/kg。在3个浓度水平下的加标回收率为78%~103%；相对标准偏差均不大于8.8%。该方法快速、简便、准确、灵敏，可作为酱油中4种氯丙醇的有效检测方法。     

Partial molar enthalpy properties and correlation of excess molar enthalpy data of acetonitrile + diethylamine or S-butylamine mixtures at various temperatures and atmospheric pressure

Experimental data of excess molar enthalpy of binary mixtures of acetonitrile + diethylamine or S-butylamine mixtures as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure have been used to calculate excess partial molar enthalpy and partial molar enthalpy of each component as a function of composition as well as partial molar enthalpy properties at infinite dilution. The Flory and Prigogine–Flory–Patterson (PFP) theories were applied to correlate the data. The results of the calculations as well as the influence of temperature and isomers chain on the partial molar enthalpy properties are discussed.