Quantitative determination of paraffin oil in blood by capillary gas chromatography

A capillary gas chromatographic method is described for the quantitative determination of liquid paraffin in blood. Paraffin is extracted from blood into n-heptane. After solvent evaporation and dissolution of the residue in 100–200 μl n-heptane one μl is injected into a gas chromatograph fitted with a fused silica capillary column (Permabond® OV-1-CB-0.1, 10 m × 0.32 mm i.d.) and flame ionization detector. Analysis is performed by using an oven program [50°C (3 min)?285°C (5 min), rise 10%min]. The sensitivity (1.5 ng hexadecane) and the reproducibility prove the applicability of the method for the determination of liquid paraffin in blood and for the study of the stability of the liquid paraffin hollow fiber membranes used in an extracorporeal liver support system.     

Polymeric materials for lithium‐ion cells

Lithium‐ion (Li‐ion) cells have gained considerable attention in recent years as a power source for various applications owing to their high voltage, high energy density, low self‐discharge, and excellent cycle life. Polymeric materials play a pivotal role in the processing, performance, and safety of Li‐ion cells. The polymeric materials used in Li‐ion cells include: binder for electrode processing, separator, electrolyte, and electrode active material. Active research is being pursued in all of these areas to improve the energy density, power density, cycle life, and safety of Li‐ion cells. This review article gives an overview of the various polymeric materials used in Li‐ion cells and the recent advances in these materials. Copyright © 2017 John Wiley & Sons, Ltd.     

Capacitive Properties of the Binder‐Free Electrode Prepared from Carbon Derived from Cotton and Reduced Graphene Oxide

The binder‐free composite films of reduced graphene oxide (rGO ) and activated carbon derived from cotton (aCFC ) have been fabricated and used as electrodes for electrochemical capacitors (ECs ) to avoid the decrease of capacitive performance in traditional process caused by the additional binder. The optimal aCFC is prepared at 850 °C when the mass ratio of carbon and potassium hydroxide is 1 to 4. The optimal composite film prepared from the mass ratio of aCFC /GO =2/1 exhibits porous structure, and has a specific surface area of 849.6 m²•g⁻¹ and a total pore volume of 0.61 mL •g⁻¹. Based on the two‐electrode system testing in 6.0 mol/L KOH electrolyte, the optimal composite has specific capacitance of about 202 F•g⁻¹, 374 mF •cm⁻² and 116 F•cm⁻³ in terms of mass, area and volume, and shows excellent rate capability and good cyclic stability (91.7% retention of the initial capacitance after 5000 cycles). Furthermore, the assembled solid‐state ECs by using KOH /polyvinyl alcohol as electrolyte show good mechanical stability and capacitive performances after repeated bending cycles. It is proved that this method is effective to fabricate binder‐free electrodes for ECs and will open up a novel route for the reuse of waste cotton.     

Growing ZIF-8 Seeds on Charged COF Substrates toward Efficient Propylene-Propane Separation Membranes

We report a covalent organic framework (COF) induced seeding strategy to fabricate metal–organic framework (MOF) membranes. Contrary to graphene oxide nuclei-depositing substrate, COF substrate has uniform pore size, high microporosity and abundant functional groups. We designed a series of charged COF nanosheets to induce the formation of ZIF-8@COF nanosheet seeds with high aspect ratio over 150, which were readily processed into a compact and uniform seed layer. The resulting ZIF-8 membranes with thickness down to 100 nm exhibit an ultrahigh C₃H₆/C₃H₈ separation performance and superior long-term stability. Our strategy is also validated by fabricating ultrathin ZIF-67 and UiO-66 membranes.     

Influence of molecular weight on the thermal decomposition of hydroxyl terminated polybutadiene

Thermogravimetric analysis of hydroxyl terminated polybutadiene (HTPB) and its fractions of different molecular weights separated by preparative GPC shows two major stages of weight loss of different nature in a nitrogen atmosphere. The first stage is primarily depolymerisation, cyclisation and crosslinking of molecules and the second stage is mainly the decomposition of the residue from the first stage. The kinetic parameters, viz. activation energy E and pre-exponential factor A using four different non-isothermal integral equations show a systematic increase with increase in molecular weight for the first stage, whereas for the second stage, the effect of molecular weight on E and A values is not prominent. The increase in E and A values for the first stage is attributed to the formation of greater number of cyclised and crosslinked products from molecules of higher dimensions. Quantitative correlations between the kinetic constants and the molecular weight parameters were derived for the first stage as a quadratic curve following the equation: E or ln A = K₁ − K₂/M (where K₁ and K₂ are empirical constants whose values are different for the different molecular weight averages, viz. M_n, M_w and M_z and for the different equations).     

Antigen retrieval on formaldehyde-fixed paraffin sections: its potential drawbacks and optimization for double immunostaining

It is well known that the major artifact induced by formaldehyde fixation is the masking of tissue antigens due to cross-linking of protein amino acid residues. Recently many antigen retrieval techniques have been devised to unmask the hidden antigen epitopes and recover immunoreactivity. In this study, some practical problems of two common unmasking techniques, i.e. heat-induced epitope retrieval and enzyme digestion have been reviewed in immunostaining of proliferating cell nuclear antigen (PCNA) on formaldehyde-fixed paraffin-embedded sections. As the heating conditions became more severe, false-positive staining and/or nonspecific background staining occurred. Based on the principle of protein inactivation/denaturation and the possible mechanisms of antigen retrieval, it has been suggested that the antigen retrieval itself can also denature proteins in tissues, just as many other protein inactivation processes. Thus, the total magnitude of protein conformational change caused by the overall unmasking procedure is in practice crucial. To prove this hypothesis and to overcome such undesirable drawbacks after antigen retrieval, a new combination technique of a mild heating condition (microwaved at 80°C for 15–20 min) and pepsin digestion was devised. This technique led to a strong specific immunoreactivity of PCNA, without any undesirable false positive or background staining. The procedure was also adapted for double immunostaining of PCNA together with -actin, bromodeoxyuridine, keratin, type IV collagen and vimentin.     

煤沥青筑路油受氢改质

研究了煤沥青在供氢剂（再生橡胶）的上,族组成随反应时间的变化规律及其受氢改质机理。利用核磁共振、元素分析、分子量测定等手段,计算得到了煤沥青、溶剂油以及改质筑路油等的平均结构参数。结果表明,与空白样对比,加入再生橡胶使得筑路油中沥青质含量由４５．０％增加到６１．５％,软沥青由２７．０％降低到１４．４％,不溶物由２８．０％降低至２４．１％,对比橡胶和筑路油族组成的＾１Ｈ～ＮＭＲ谱图可发现,在化学位移     

A simple protocol for Matrix Assisted Laser Desorption Ionization- time of flight-mass spectrometry (MALDI-TOF-MS) analysis of lipids and proteins in single microsamples of paintings

A simple protocol, based on Bligh–Dyer (BD) extraction followed by MALDI-TOF-MS analysis, for fast identification of paint binders in single microsamples is proposed. For the first time it is demonstrated that the BD method is effective for the simultaneous extraction of lipids and proteins from complex, and atypical matrices, such as pigmented paint layers. The protocol makes use of an alternative denaturing anionic detergent (RapiGest™) in order to improve efficiency of protein digestion and purification step. Detection of various lipid classes, such as triacylglycerols (TAGs) and phospholipids (PLs), and their oxidation by-products was accomplished, whereas proteins could be identified by peptide mass fingerprinting. The effect of pigments on ageing of lipids and proteins was also investigated.     

In-situ polymerized cross-linked binder for cathode in lithium-sulfur batteries

Volume expansion and polysulfide shuttle effect are the main barriers for the commercialization of lithium-sulfur(Li-S) battery.In this work,we in-situ polymerized a cross-linked binder in sulfur cathode to solve the aforementioned problems using a facile method under mild conditions.Polycarbonate diol(PCDL),triethanolamine(TEA) and hexamethylene diisocyanate(HDI) were chosen as precursors to prepare the cross-linked binder.The in-situ polymerized binder(PTH) builds a strong network in sulfur cathode,which could restrain the volume expansion of sulfu r.Moreover,by adopting functional groups of oxygen atoms and nitrogen atoms,the binder could effectively facilitate transportation of Li-ion and adsorb polysulfide chemically.The Li-S battery with bare sulfur and carbon/sulfur composite cathodes and cross-linked PTH binder displays much better electrochemical performance than that of the battery with PVDF.The PTH-bare S cathode with a mass loading of 5.97 mg/cm^2 could deliver a capacity of 733.3 mAh/g at 0.2 C,and remained 585.5 mAh/g after 100 cycles.This in-situ polymerized binder is proved to be quite effective on restraining the volume expansion and suppressing polysulfide shuttle effect,then improving the electrochemical performance of Li-S battery.     

用于荧光光谱测定的微量固体粉末样品制样优化*

为满足微量固体粉末荧光检测要求,采用薄层制样法,改变黏结剂种类、黏结剂的用量、涂层厚度以及后处理方法来进行其制样工艺优化。 结果表明:以聚乙烯醇做黏结剂、1∶5的固液比、在50 ℃烘干30 min、涂片次数3层的薄层制样优化工艺可满足荧光固体测样的要求。采用t检验比较固体样品池装样和薄层制样法的荧光检测结果发现两者无显著性差异,薄层制样优化工艺的需样量较样品池减少90%。