Strong influences of cocatalyst on ethylene/propylene copolymerization with a MgCl2/SiO2/TiCl4/diester type Ziegler-Natta catalyst

Using triethylaluminum (TEA), triisobutylaluminum (TIBA) or TEA/TIBA mixtures of molar ratio 75/25, 50/50 and 25/75 as the cocatalyst, five different ethylene-propylene copolymer samples were synthesized by a MgCl₂/SiO₂/TiCl₄/diester type Ziegler-Natta catalyst in a slurry polymerization process. The synthesized copolymers are strongly heterogeneous in chain structure and were fractionated into part of nearly random copolymer and part of segmented copolymer. Both polymerization activity and copolymer structure were found to be markedly changed when the cocatalyst was changed from TEA to TEA/TIBA mixtures or pure TIBA. As the content of TEA in cocatalyst increases, yield of the random part of product increases and the yield of the crystalline segmented copolymer part decreases. There is also a decrease in ethylene content of the whole product with increasing TEA amount. Copolymerization behaviors of the TEA/TIBA mixture activated catalysis systems are not simple superposition of those activated by pure TEA and TIBA. When a 50/50 TEA/TIBA mixture was used as cocatalyst, the copolymerization activity became the highest, and yields of both the random copolymer part and the segmented copolymer part are close to the highest level. On the other hand, both parts of the copolymer produced with a 50/50 TEA/TIBA mixture are relatively more blocky than the products of TEA or TIBA systems, and difference in ethylene content between the random part and the segmented part was the smallest. The segmented copolymer part of three typical samples was further fractionated by temperature-gradient extraction fractionation into fractions of different ethylene content and sequence distribution. Changing TEA content in the cocatalyst exerted strong influences also on the fraction distribution of the segmented part of copolymer.     

原位漫反射红外光谱研究氮氧化物在Ag-ZSM-5催化剂上的吸附态及选择性催化还原反应机理

利用原位分析方法对催化剂表面吸附态进行动态表征，对了解催化反应机理具有重要的意义。漫反射红外光谱是一种理想的原位方法，应用该方法在298－773K范围原位考察了以丙烯为还原剂，NO在Ag-ZSM-5催化剂上的吸附态及选择性催化还原过程。认为NO的选择性催化还原符合直接作用机理，还原的关键是形成有机－氮氧化物（R－NO2或R－ONO）中间体。O2的作用是使C3H6充分活化，并是有效产生有机－氮氧化物不可缺少的条件。     

Nd（P_（507））_3－Al（i－Bu）_3催化马来酸酐与环氧丙烷开环交替共聚

本文研究了马来酸酐和环氧丙烷交替共聚，发现Ｎｄ（Ｐ_（５０７））_３－Ａｌ（ｉ－Ｂｕ）_３是马来酸酐（ＭＡｎ）和环氧丙烷（ＰＯ）交替共聚的良好催化剂，并用红外光谱，核磁共振谱研究了共聚物的结构。     

COORDINATION COPOLYMERIZATION OF STYRENE WITH MALEIC ANHYDRIDE BY RARE-EARTH COORDINATION CATALYSTS

The study on coordination copolymerization of styrene (S) with maleic anhydride (MA) by rare-earth coordination catalysts, NdL_3-Al(i-Bu)_3, has been successfully carried out for the first time. Some features, kinetic behavior, and mechanism of the SMA copolymerization by Nd(naph)_3-Al(i-Bu)_3 system are described and discussed. The copolymex of styrenemaleic anhydride prepared by the NdL_3-Al(i-Bu)_3 systems in benzene at 50℃ is an alternating-rich white powder having high number-average molecular weight of 6—8.5×10~5. The overall activation energy for the polymerization was found to be 10.5KJ/mol. The polymerization was not suppressed by addition of hydroquinone. The catalytic activity of various ligands in NdL_3 for the copolymerization decreases in the following order: Nd (naph)_3>Nd-(P_(507))_3～NdCl_3-6H_2O>Nd(P_(204))_3>Nd(acac)_3. 3H_2O. The experimental results are explained based on a mechanism to be the coordination-type copolymerization in terms of the participation of a monomer-monomer c     

沸石上萘的催化破环反应

沸石上萘的催化破环反应朱建华刘琳胡玉海曹洁明须沁华（南京大学化学化工学院化学系，南京２１００９３）关键词沸石催化剂，ＨＭＳ中孔分子筛，萘，多环芳烃，催化裂解，环境保护分类号Ｏ６４３／Ｘ５当前，治理大工业生产带来的环境污染已经成为全球关注的课题，也是...     

Sm修饰的Ni-MgO催化剂制备碳纳米管的研究

Carbon nanotubes (CNTs) have been synthesized over Ni-MgO and Ni-Sm-MgO catalysts by decomposition of CH₄ at 650 ℃. The addition of Sm into Ni-MgO catalyst not only promotes the catalytic activity and lifetime of the catalyst, but also improves the graphitization and heat stability of carbon nanotubes. The yield of CNTs obtained over the Ni-10Sm-MgO catalyst reaches 33 g C·(g Ni)^-1, being more than 5 times higher than that of the Ni-MgO catalyst. XRD and TPR results of the catalysts indicate that there is a remarkable interaction of Ni with Sm species, which facilitates the reduction of nickel and restrains the Ni particles from agglomerating.     

甲烷部分氧化制合成气 Ⅰ．甲烷在过渡金属上的活化

文中用同位素交换（Ｄ_２─ＣＨ_４）反应来测量四种过渡金属负载型催化剂对甲烷的活化能力，并与Ｓｖｅｎｓｓｏｎ等从头算的计算结果作了比较，表明最有效活化甲烷分子的Ｃ─Ｈ键的金属是铑（Ｒｈ）．文中还测定了在甲烷部分氧化制合成气反应中，四个不同催化剂的催化活性与选择性，并与它们对甲烷的活化能力进行对比，可以看出甲烷部分氧化反应中，反应活性高的催化剂有效地活化甲烷，断裂Ｃ─Ｈ键，而且氘代甲烷产物分布以形成ＣＤ_４产物为主要成份．     

雷尼镍催化剂的吸附量热研究

雷尼镍催化剂的吸附量热研究王益沈俭一（南京大学化学系，南京２１００９３）ＨａｎｓＷａｒｌｉｍｏｎｔ（ＩｎｓｔｉｔｕｔｅｆｏｒＳｏｌｉｄＳｔａｔｅａｎｄＭａｔｅｒｉａｌｓＲｅｓｅａｒｃｈ，ＤｒｅｓｄｅｎＤ０１０６９，Ｇｅｒｍａｎｙ）关键词雷尼镍...     

高活性锆掺杂钴催化剂的制备及其催化甲烷燃烧性能研究

由水热法制备了掺杂锆摩尔百分比为0，10，20，30．40，50％的钴催化剂，该系列催化剂对甲烷的低温催化燃烧显示出高活性．其中，10％Zr掺杂的催化剂活性最好，可在370℃使甲烷转化率达100％．XRD分析表明，该法制得的催化剂中的活性四氧化三钴物种是由一种晶态的碳酸钴前体分解而成，Co3O4为粒径在20～40nm之问的纳米粒子．用热重分析(TG)研究了碳酸钴前体的热分解行为．     

杂多酸的固载化─关于制备负载型酸催化剂的一般原理

杂多酸同时具有酸和氧化－还原的催化特性，有着很广泛的应用前景．这类化合物在一系列精细合成中取代硫酸作为催化剂以满足环保的要求，显示出了很大的潜力．杂多酸固载化后，不仅能在液相氧化和酸催化反应中把催化剂从反应介质中很方便地分离出来，而且还为这类均相催化反应的多相化，甚至利用催化蒸馏新工艺等创造了应有的条件，可以使生产工艺大大简化，获得更广泛的应用．本文以很好表征过的多种孔性材料，包括氧化物，如Ａｌ_２Ｏ_３、ＳｉＯ_２、ＴｉＯ_２、硅藻土、膨润土和来源不同的活性炭为载体，考察了负载杂多酸催化剂的催化活性．在大量前期工作的基础上，通过总结载体对固载杂多酸催化活性的影响等，探讨载体的内在性质在杂多酸固载、吸附和催化反应中的作用本质，为由吸附法制备各种负载型固体酸催化剂在液相中的应用提供可资参考的模型．