Solid‐State Electrochemical Method for Determining Core and Shell Size in Pd@PdO Nanoparticles

Electrochemical characterization of palladium nanoparticles surrounded by a palladium oxide shell (Pd@PdO) is described from a combination of voltammetry plus electrochemical quartz crystal microbalance experiments at nanoparticle deposits on graphite electrodes in contact with aqueous H₂SO₄ and NaOH solutions. A method for determining the metal core size and oxide shell thickness of the Pd@PdO nanoparticles, based on a combination of conventional voltammetry of nanoparticles in DMSO solution and voltammetry of nanoparticle deposits in contact with 0.10 M aqueous NaOH solution, is described.     

α、β、γ、δ-四(4-二甲氨基苯基)卟啉与钯(Ⅱ)显色反应的分光光度法研究

近年来国内外对卟啉衍生物在分析中的应用进行了广泛的研究,特别是非水溶性卟啉衍生物由于它们具有易合成,易提纯,结构类型多等特点而愈来愈得到重视。本文对非水溶性α、β、γ、δ-四(4-二甲氨基苯基)卟啉〔简称T(4-DMAP)P〕作显色剂测钯(Ⅱ)的反应进行了较系统的研究,找到了显色反应的最佳条件。测得表观摩尔吸光系数达5.7×10~6,是目前测痕量钯(Ⅱ)最灵敏的分光光度法。     

Pd(111), Pd(100)及Pd(110)表面H2和O2直接合成H2O2的密度泛函理论研究

采用周期性密度泛函理论研究了H₂和O₂在Pd(111),Pd(100)及Pd(110)表面上直接合成H₂O₂的反应机理,对反应的主要基元步骤进行了计算和分析.结果表明,Pd(111)表面对H₂O₂直接合成的催化选择性最好,表面原子密度较低的Pd(100)表面和Pd(110)表面上含有O-O键的表面物种解离严重,不利于H₂O₂的生成.H₂O₂的选择性与含有O-O键表面物种的O-O键能和表面物种的结合能有关.含有O-O键的表面物种在表面的结合能越大,越容易发生解离,不利于形成H₂O₂.     

Pd/TiC-C催化剂对甲酸氧化的电催化性能

研究了TiC和C作混合载体的Pd(Pd/TiC-C)催化剂对甲酸氧化的电催化性能。发现Pd/TiC-C催化剂对直接甲酸燃料电池(DFAFC)中甲酸氧化的电催化性能要优于Pd/C催化剂。而且,Pd/TiC-C催化剂的电催化性能与C和TiC的质量比有关,当质量比为2时,Pd/TiC-C催化剂对甲酸氧化的电催化活性和稳定性最好,甲酸在C和TiC的质量比为2的Pd/TiC-C催化剂电极上的氧化峰峰电位为0.164 V,比在Pd/C催化剂电极上负移12 mV,峰电流密度为23.08 mA/cm2,比在Pd/C催化剂电极上高约42％。     

Rotamers of palladium complexes bearing IR active N-heterocyclic carbene ligands: Synthesis, structural characterization and catalytic activities

The preparation and properties of mono- versus bis(carbene) Pd(II) complexes bearing unsymmetrical cyano- and ester-functionalized NHC ligands as potential IR probes were studied in detail. Direct reaction of Pd(OAc)₂ with functionalized imidazolium salts afforded either bis(carbene) (3a, c) or monocarbene complexes (5, 6) with a N-coordinated imidazole co-ligand. The latter were exclusively obtained with N-ethylene substituted salts, which were found to undergo N-C cleavage reaction. The milder Ag-carbene transfer reaction on the other hand was tolerable to the length of the substituents and the nature of the functional groups. All bis(carbene) complexes (3a-c, 4a-c) were obtained as a inseparable mixture of square-planar trans-anti and trans-syn rotamers. The identity, ratio and dynamic equilibrium of these rotamers have been investigated and the relatively high rotational barrier for rotamers of 3a was estimated to be about 74 kJ mol⁻¹ at 380 K. All eight complexes were fully characterized by NMR and IR spectroscopies, ESI mass spectrometry and X-ray single crystal and powder diffraction. A preliminary catalytic study showed that ester-functionalized complexes 4a and 4b gave rise to highly active catalyst in the double Mizoroki-Heck coupling of aryl dibromides, while the in situ ester-hydrolyzed complexes were also active in the coupling of activated aryl chlorides.     

Preparation, coordination properties and catalytic use of 1′-(diphenylphosphanyl)-1-ferrocenecarboxamides bearing 2-hydroxyethyl pendant groups

Polar amido-phosphane ligands, viz 1-(diphenylphosphanyl)-1′-[N-(2-hydroxyethyl)carbamoyl]ferrocene (1) and 1-(diphenylphosphanyl)-1′-[N,N-bis(2-hydroxyethyl)carbamoyl]ferrocene (2) were synthesised from 1′-(diphenylphosphanyl)-1-ferrocenecarboxylic acid (Hdpf) by direct amide coupling or via Hdpf-pentafluorophenyl ester 3. Subsequent reactions of 1 and 2 with [PdCl₂(cod)] (cod = η²:η²-cyclocta-1,5-diene) gave the respective bis(phosphane) complexes trans-[PdCl₂L₂] (4, L = 1; 5, L = 2). Depending on the solvent used in their subsequent crystallisation (ethanol or chloroform), these complexes were isolated in several defined solvated forms. The structure determination for free ligands and their solvated complexes (4·2EtOH, 4·6CHCl₃, 5·2EtOH, and 5·4CHCl₃) revealed the dominating role of hydrogen bonding in their crystal assemblies, the nature and complexity of the formed hydrogen-bonded arrays strongly varying with the ligand structure (one vs. two 2-hydroxethyl chains), their number in the discrete species (free ligands vs. the complexes), and also with the solvate. Catalytic tests performed with 4 and 5 in Suzuki-Miyaura cross-coupling reaction showed that both complexes form active catalysts for the coupling of aryl bromides with phenylboronic acid in common polar organic solvents, in water and in toluene-water biphasic mixture. Yet, complex 4 gave rise to hydrolytically more stable catalyst, which could be used five times without any detectable loss of activity in the toluene/water system. Complex 4 was also successfully applied to the synthesis of biaryl anti-inflammatory drugs and their analogues in pure water and in the toluene-water mixture.     

1-Methyl-4-ferrocenylmethyl-3,5-diphenylpyrazole: A versatile ligand for palladium(II) and platinum(II)

The syntheses and characterization of two novel ferrocene derivatives containing 3,5-diphenylpyrazole units of general formula [1-R-3,5-Ph₂-(C₃N₂)-CH₂-Fc] {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄) and R = H (2) or Me (3)} together with a study of their reactivity with palladium(II) and platinum(II) salts or complexes under different experimental conditions is described. These studies have allowed us to isolate and characterize trans-[Pd{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}₂Cl₂] (4a) and three different types of heterodimetallic complexes: cis-[M{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] {M = Pd (5a) or Pt (5b)}, the cyclometallated products [M{κ²-C,N-[3-(C₆H₄)-1-Me-5-Ph-(C₃N₂)]-CH₂-Fc}Cl(L)] with L = PPh₃ and M = Pd (6a) or Pt (6b) or L = dmso and M = Pt (8b) and the trans-isomer of [Pt{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] (7b). In compounds 4a, 5a, 5b and 7b, the ligand behaves as a neutral N-donor group; while in 6a, 6b and 8b it acts as a bidentate [C(sp²,phenyl),N(pyrazole)]⁻ group. A comparative study of the spectroscopic properties of the compounds, based on NMR, IR and UV-Visible experiments, is also reported.     

Synthesis and reactivity of new functionalized Pd(II) cyclometallated complexes with boronic esters

Treatment of the functionalized Schiff base ligands with boronic esters 1a, 1b, 1c and 1d with palladium (II) acetate in toluene gave the polynuclear cyclometallated complexes 2a, 2b, 2c and 2d, respectively, as air-stable solids, with the ligand as a terdentate [C,N,O] moiety after deprotonation of the -OH group. Reaction of 1j with palladium (II) acetate in toluene gave the dinuclear cyclometallated complex 5j. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species 3a, 3b, 3c, 3d and 6j with cleavage of the polynuclear structure. Treatment of 2c with the diphosphine Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) in 1:2 molar ratio gave the dinuclear cyclometallated complex 4c as an air-stable solid.Deprotection of the boronic ester can be easily achieved; thus, by stirring the cyclometallated complex 3a in a mixture of acetone/water, 3e is obtained in good yield. Reaction of the tetrameric complex 2a with cis-1,2-cyclopentanediol in chloroform gave complex 2c after a transesterification reaction. Under similar conditions complexes 3a and 3d behaved similarly: with cis-1,2-cyclopentanediol, pinacol or diethanolamine complexes 3c, 3b, 3g and 3f, were obtained. The pinacol derivatives 3b and 3g experiment the Petasis reaction with glyoxylic acid and morpholine in dichloromethane to give complexes 3h, and 3i, respectively.     

Comparative studies of ONNO-based ligands as ionophores for palladium ion-selective membrane sensors

Palladium sensors based on two neutral ionophores, N,N′-bis(acetylacetone) cyclohexanediamine (L₁) and N,N′-bis(o-hydroxyacetophenone)-1,2-cyclohexanediamine (L₂) for quantification of palladium ions are described. Effect of various plasticizers (o-NPOE, DBP, DEP, DOP, TBP, and CN) and anion excluder, sodium tetra phenyl borate (NaTPB) has been studied. The best performance is obtained with a membrane composition of PVC:o-NPOE:ionophore (L₁):NaTPB of 150:300:5:5 (%, w/w). The sensor exhibits significantly enhanced selectivity towards palladium ion over the concentration range 1.0 × 10⁻⁸ to 1.0 × 10⁻¹ M with a lower detection limit of 4.0 × 10⁻⁹ M and a Nernstian compliance (29.1 ± 0.3 mV decade⁻¹ of activity) within pH range 2.0-6.0 and fast response time of 10 s. Influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. Fast and stable response, good reproducibility and long-term stability of the sensor are demonstrated. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol and acetonitrile and could be used for a period of 4 months. Selectivity coefficients determined with fixed interference method (FIM) indicate high selectivity for palladium. The proposed electrode shows fairly good discrimination of palladium from other cations. The application of prepared sensor has been demonstrated in determination of palladium ions in spiked water sample.     

Preparation of 2,3-disubstituted indoles by sequential Larock heteroannulation and silicon-based cross-coupling reactions

A simple and convergent synthesis of 2,3-disubstituted indoles has been developed using a sequential Larock indole synthesis and silicon-based, cross-coupling reaction. Substituted 2-iodoanilines reacted with an alkynyldimethylsilyl tert-butyl ether to afford indole-2-silanols under the Larock heteroannulation conditions after hydrolysis. The corresponding sodium 2-indolylsilanolate salts successfully engaged in cross-coupling with aryl bromides and chlorides to afford multi-substituted indoles. The development of an alkynyldimethylsilyl tert-butyl ether as a masked silanol equivalent enabled a smooth heteroannulation process and the identification of a suitable catalyst/ligand combination provided for a facile cross-coupling reaction.